All MIBs › TN-SAS-QOS-MIB
Organization: Nokia
Last Updated: 2015-11-02
Category: Nokia Carrier Ethernet, QoS
Description: Manages Nokia SAS QoS ingress and egress policy classification and queuing.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TN-SAS-QOS-MIB?
TN-SAS-QOS-MIB is a Nokia (formerly Alcatel-Lucent) enterprise MIB for provisioning Quality of Service on Nokia SAS (Service Access Switch) and 7x50 platforms, covering ingress/egress SAP (Service Access Point) policy classification and queuing. It defines egress policy configuration (scope, description, remarking rules/policy IDs, remark type) and per-policy egress queue definitions, alongside parallel SAP ingress QoS objects. It is primarily software/configuration-oriented, but polling it lets an admin confirm which QoS remarking and queuing policy is actively applied to a service, and detect a misapplied or stale policy via last-changed timestamps that could explain unexpected traffic prioritization or drops. It is part of the Nokia SROS/SAS TIMETRA-* MIB family and works alongside the vendor's SAP/service and queue MIBs. It is deployed on Nokia 7x50/SAS service-edge routers and switches in carrier/enterprise networks provisioning per-service QoS. Network engineers evaluating or troubleshooting this functionality can download the TN-SAS-QOS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TN-SAS-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia 7x50 / SAS service-edge router or switch
Monitoring Examples
An admin checks tnAccessEgressTable/tnAccessEgressEntry objects such as tnAccessEgressRemark and tnAccessEgressRemarkPolicyId to confirm which remarking policy is applied to egress traffic on a SAP. tnAccessEgressQueueTable/tnAccessEgressQueueEntry entries verify queue assignments for that policy. tnAccessEgressLastChanged helps identify whether a recent policy edit is the cause of an unexpected change in traffic marking behavior.
What Can Be Monitored
- egress/ingress QoS policy configuration
- traffic remarking rules
- queue assignment
- policy last-changed timestamp
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TN-QOS-MIB
| tnNetworkPolicyEntry | OBJECT-TYPE |
| tnNetworkPolicyIndex | OBJECT-TYPE |
| tnNetworkQueueEntry | OBJECT-TYPE |
| tnPortSchedulerPlcyEntry | OBJECT-TYPE |
| tnSapIngressEntry | OBJECT-TYPE |
| tnSapIngressFCEntry | OBJECT-TYPE |
| tnSapIngressIndex | OBJECT-TYPE |
| tnSlopePolicy | OBJECT-TYPE |
| tnSlopePolicyEntry | OBJECT-TYPE |
From TN-SAP-MIB
| tnSapEncapValue | OBJECT-TYPE |
| tnSapPortId | OBJECT-TYPE |
From TN-SERV-MIB
| tnSvcId | OBJECT-TYPE |
From TN-TC-MIB
| Dot1PPriority | |
| TAdaptationRule | |
| TBurstSize | |
| TCIRRate | |
| TDSCPNameOrEmpty | |
| TEgressQueueId | |
| TFCName | |
| TItemDescription | |
| TItemScope | |
| TLspExpValue | |
| TMeterMode | |
| TMplsLspExpProfMapID | |
| TNamedItem | |
| TNetworkIngressMeterId | |
| TPIRRate | |
| TPlcyMode | |
| TPolicyID | |
| TProfile | |
| TQWeight | |
| TQueueId | |
| TSapIngressMeterId |
From TROPIC-GLOBAL-REG
| tnSASModules | OBJECT-IDENTITY |
| tnSASObjs | OBJECT-IDENTITY |
From TROPIC-SYSTEM-MIB
| tnSysSwitchId | OBJECT-TYPE |
How to Use in IPNetwork Monitor
Example using tnSapIngQosMeterStatsForwardedInProfPackets OID:
Select a Nokia 7x50 / SAS service-edge router or switch (SAP ingress/egress QoS policy status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tnSapIngQosMeterStatsForwardedInProfPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| tnSASQosMIBModule | 1.3.6.1.4.1.7483.7.2.1.1.5 | This document is the SNMP MIB module to manage and provision Quality of Service features on Nokia 7x50 systems. Copyright 2003-2012 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| tnSASQosObjects | 1.3.6.1.4.1.7483.7.2.2.2.1 | |||
| tnAccessEgressObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.1 | |||
| tnAccessEgressTable | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1 | not-accessible | Information about all Access-egress policies. | |
| tnAccessEgressEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1 | not-accessible | Access Egress QoS information for a particular port | |
| TAC tnAccessEgressIndex | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.1 | TAccessEgressPolicyID | not-accessible | the sap-egress policy ID is used as index for the table. |
| ROW tnAccessEgressRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.2 | RowStatus | read-create | Row Status of this policy's entry. |
| TIT tnAccessEgressScope | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.3 | TItemScope | read-create | scope of the sap-egress policy. |
| TIT tnAccessEgressDescription | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.4 | TItemDescription | read-create | user-supplied description of this sap-egress policy. |
| TIM tnAccessEgressLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.5 | TimeStamp | read-only | timestamp of last change to this row in tnAccessEgressTable. |
| T/F tnAccessEgressRemark | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.6 | TruthValue | read-create | This object specifies if the system will remark the egress packets or not. DEf val is TRUE for STU and FALSE for MTU |
| TRE tnAccessEgressRemarkPolicyId | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.7 | TRemarkPolicyID | read-create | Remark Policy Id that be used when remarking is enabled. |
| INT tnAccessEgressRemarkType | 1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.8 | INTEGER | read-create | This object specifies system remark type, tnAccessEgressRemark will be set to true and tnAccessEgressRemarkType will specify the remark type. |
| tnAccessEgressQueueTable | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2 | not-accessible | information about all access-egress policies' queues. | |
| tnAccessEgressQueueEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1 | not-accessible | Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. | |
| TEG tnAccessEgressQueueIndex | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.1 | TEgressQueueId | not-accessible | the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted. |
| ROW tnAccessEgressQueueRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.2 | RowStatus | read-create | Row Status of the entry. |
| TBU tnAccessEgressQueueCBS | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.3 | TBurstSize | read-create | The amount of reserved buffer space (in kilo bytes) for the queue. |
| TBU tnAccessEgressQueueMBS | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.4 | TBurstSize | read-create | The maximum amount of buffer space (in kilo bytes) allowed for the queue. |
| TAD tnAccessEgressQueuePIRAdaptation | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.5 | TAdaptationRule | read-create | The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
| TAD tnAccessEgressQueueCIRAdaptation | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.6 | TAdaptationRule | read-create | The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
| TPI tnAccessEgressQueueAdminPIR | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.7 | TPIRRate | read-create | The administrative PIR specified by the user. |
| TCI tnAccessEgressQueueAdminCIR | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.8 | TCIRRate | read-create | The administrative CIR specified by the user. |
| TPI tnAccessEgressQueueOperPIR | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.9 | TPIRRate | read-only | The administrative PIR specified by the user. |
| TCI tnAccessEgressQueueOperCIR | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.10 | TCIRRate | read-only | The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules. |
| TIM tnAccessEgressQueueLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.11 | TimeStamp | read-only | timestamp of last change to this row in tnAccessEgressQueueTable. |
| tnAccessEgressFCTable | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3 | not-accessible | ||
| tnAccessEgressFCEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1 | not-accessible | Information about a particular access-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. | |
| TFC tnAccessEgressFCName | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.1 | TFCName | not-accessible | forwarding class name. |
| ROW tnAccessEgressFCRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.2 | RowStatus | read-create | Row Status. |
| TEG tnAccessEgressFCQueue | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.3 | TEgressQueueId | read-create | The queue to use for packets in this forwarding class. No FC can map to the same queue being used by 'premium' class. You must specify a valid queue-id before setting the row status to active. |
| DOT tnAccessEgressFCDot1PInProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.4 | Dot1PPriority | read-create | the Dot1p to use for in-profile traffic. |
| DOT tnAccessEgressFCDot1POutProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.5 | Dot1PPriority | read-create | the Dot1p to use for in-profile traffic. |
| TIM tnAccessEgressFCLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.6 | TimeStamp | read-only | timestamp of last change to this row in tnAccessEgressFCTable. |
| TDS tnAccessEgressFCDscpInProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.7 | TDSCPNameOrEmpty | read-write | The DSCP to use for in-profile traffic. |
| TDS tnAccessEgressFCDscpOutProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.8 | TDSCPNameOrEmpty | read-write | The DSCP to use for out-profile traffic. |
| U32 tnAccessEgressScalar1 | 1.3.6.1.4.1.7483.7.2.2.2.1.1.101 | Unsigned32 | read-only | A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item. |
| U32 tnAccessEgressScalar2 | 1.3.6.1.4.1.7483.7.2.2.2.1.1.102 | Unsigned32 | read-only | |
| tnSASSapIngressObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.2 | |||
| tnSapIngressMeterTable | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1 | not-accessible | Information about all sap-ingress policies' Meters. | |
| tnSapIngressMeterEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1 | not-accessible | Information about a particular meter for a sap-ingress policy. Meter (1) is the used as a default for unicast and meter (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user. | |
| TSA tnSapIngressMeter | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.1 | TSapIngressMeterId | not-accessible | The Meter ID is used as the secondary index to the table entry. |
| ROW tnSapIngressMeterRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.2 | RowStatus | read-create | Row Status of the entry. This allows creation/deletion of rows in this table. |
| T/F tnSapIngressMeterMCast | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.8 | TruthValue | read-create | This object specifies if this is a multicast meter or not. |
| TAD tnSapIngressMeterPIRAdaptation | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.13 | TAdaptationRule | read-create | The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
| TAD tnSapIngressMeterCIRAdaptation | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.14 | TAdaptationRule | read-create | The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
| TIN tnSapIngressMeterAdminPIR | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.15 | TIngressPIRRate | read-create | The administrative PIR specified by the user. |
| TIN tnSapIngressMeterAdminCIR | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.16 | TIngressCIRRate | read-create | The administrative CIR specified by the user. |
| TPI tnSapIngressMeterOperPIR | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.17 | TPIRRate | read-only | The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules. |
| TCI tnSapIngressMeterOperCIR | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.18 | TCIRRate | read-only | The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules. |
| TIM tnSapIngressMeterLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.19 | TimeStamp | read-only | Timestamp of last change to this row in tnSapIngressMeterTable. |
| TME tnSapIngressMeterMode | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.21 | TMeterMode | read-create | This object is not used on SAS platform currently |
| TME tnSapIngressMeterRateMode | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.22 | TMeterRateMode | read-create | Sap Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime. |
| TIN tnSapIngressMeterAdminCBS | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.23 | TIngressBurstSize | read-create | The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter. |
| TIN tnSapIngressMeterAdminMBS | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.24 | TIngressBurstSize | read-create | The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter. |
| TIN tnSapIngressMeterOperCBS | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.25 | TIngressBurstSize | read-only | The operational value derived by computing the CBS value from the administrative CBS value |
| TIN tnSapIngressMeterOperMBS | 1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.26 | TIngressBurstSize | read-only | The operational value derived by computing the MBS value from the administrative MBS value |
| tnSASSapIngressFCTable | 1.3.6.1.4.1.7483.7.2.2.2.1.2.2 | not-accessible | This table maintains the mapping of a particular forwarding class traffic into the specified meter. | |
| tnSASSapIngressFCEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1 | not-accessible | Information about a particular sap-ingress policy's forwarding class mappings to meters. | |
| TSA tnSapIngressFCMeter | 1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.1 | TSapIngressMeterId | read-create | The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meter should be used. |
| TSA tnSapIngressFCMCastMeter | 1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.2 | TSapIngressMeterId | read-create | The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used. |
| TSA tnSapIngressFCBCastMeter | 1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.3 | TSapIngressMeterId | read-create | The specific broadcast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used. |
| TSA tnSapIngressFCUnknownMeter | 1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.4 | TSapIngressMeterId | read-create | The specific unknown destination meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used. |
| tnSapIngQosMeterStatsTable | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3 | not-accessible | A table that contains ingress QoS meter SAP statistics. | |
| tnSapIngQosMeterStatsEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1 | not-accessible | Ingress statistics about a specific SAP's QoS meter. | |
| TSA tnSapIngQosMeterId | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.1 | TSapIngressMeterId | not-accessible | The index of the ingress QoS meter of this SAP. |
| C64 tnSapIngQosMeterStatsForwardedInProfPacketsEx | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.10 | Counter64 | read-only | The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip. |
| C64 tnSapIngQosMeterStatsForwardedOutProfPackets | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.11 | Counter64 | read-only | The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip. |
| C64 tnSapIngQosMeterStatsForwardedInProfOctets | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.12 | Counter64 | read-only | The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip. |
| C64 tnSapIngQosMeterStatsForwardedOutProfOctets | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.13 | Counter64 | read-only | The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip. |
| C64 tnSapIngQosMeterStatsForwardedPackets | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.14 | Counter64 | read-only | The number of packets forwarded by the ingress Qchip. |
| C64 tnSapIngQosMeterStatsForwardedOctets | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.15 | Counter64 | read-only | The number of octets forwarded by the ingress Qchip. |
| C64 tnSapIngQosMeterStatsDroppedPackets | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.16 | Counter64 | read-only | The number of packets dropped by the ingress Qchip. |
| C64 tnSapIngQosMeterStatsDroppedOctets | 1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.17 | Counter64 | read-only | The number of octets dropped by the ingress Qchip. |
| tnSapIngressExtnTable | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4 | not-accessible | ||
| tnSapIngressExtnEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1 | not-accessible | ||
| U32 tnSapIngressNumQosClassifiers | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.1 | Unsigned32 | read-create | The number of ingress QoS classifiers to be allocated to the SAP on which this policy is applied. The number of QoS classifiers required by a SAP ingress QoS policy should be less than or equal to its tnSapIngressNumQosClassifiers. The number of Meters required by a SAP ingress QoS policy should be less than or equal to half the number of tnSapIngressNumQosClassifiers. |
| U32 tnSapIngressQosClassifiersRequiredInVpls | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.4 | Unsigned32 | read-only | This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a VPLS SAP. |
| U32 tnSapIngressQosClassifiersRequiredInEpipe | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.5 | Unsigned32 | read-only | This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a EPIPE SAP. |
| U32 tnSapIngressQosMetersRequiredInVpls | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.6 | Unsigned32 | read-only | This value indicates the number of ingress QoS meters required when this policy is applied on a SAP. This value is calculated based on the number of meters required for a VPLS SAP. |
| U32 tnSapIngressQosMetersRequiredInEpipe | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.7 | Unsigned32 | read-only | This value indicates the number of ingress QoS meters required when this policy is applied on a SAP. This value is calculated based on the number of meters required for a EPIPE SAP. |
| INT tnSapIngressIPCriteriaMatch | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.8 | INTEGER | read-create | This object specifies the basic match criteria as 'any' or 'dscp-only' based on ip. The default value is 'dscp-only' |
| INT tnSapIngressMacCriteriaMatch | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.9 | INTEGER | read-create | This object specifies the basic match criteria as 'any' or 'dot1p-only' based on Mac Address. The default value is 'any' |
| T/F tnSapIngressIPv6CriteriaEnable | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.10 | TruthValue | read-create | tnSapIngressIPv6CriteriaEnable is a boolean flag which allows/disallows configuring match criteria based on ipv6 address |
| INT tnSapIngressIPv6CriteriaMatch | 1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.11 | INTEGER | read-create | This object specifies the basic match criteria as 'any' or 'dscp-only' based on ipv6. The default value is 'dscp-only' |
| U32 tnSASSapIngressScalar1 | 1.3.6.1.4.1.7483.7.2.2.2.1.2.101 | Unsigned32 | read-only | A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item. |
| U32 tnSASSapIngressScalar2 | 1.3.6.1.4.1.7483.7.2.2.2.1.2.102 | Unsigned32 | read-only | |
| tnSASNetworkIngressObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.3 | |||
| tnNetworkIngressFCTable | 1.3.6.1.4.1.7483.7.2.2.2.1.3.1 | not-accessible | This table maintains the mapping of a particular forwarding class traffic into the specified meter. | |
| tnNetworkIngressFCEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1 | not-accessible | Information about a particular network-ingress policy's forwarding class mappings to meter. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile. | |
| TNA tnNetworkIngressFCName | 1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.1 | TNamedItem | not-accessible | tnNetworkIngressFCName specifies the forwarding class for which this mapping is defined. |
| ROW tnNetworkIngressFCRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.2 | RowStatus | read-create | Row Status for this Entry. |
| TNE tnNetworkIngressFCMeter | 1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.3 | TNetworkIngressMeterId | read-create | The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meters should be used. |
| TNE tnNetworkIngressFCMCastMeter | 1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.4 | TNetworkIngressMeterId | read-create | The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used. |
| TIM tnNetworkIngressFCLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.5 | TimeStamp | read-only | tnNetworkIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified. |
| tnNetworkIngressMeterTable | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2 | not-accessible | information about all network policies' meters. | |
| tnNetworkIngressMeterEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1 | not-accessible | Information about a particular meter for a network policy. Meter (1) is the used as a default for unicast and meter (9) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user. | |
| TNE tnNetworkIngressMeterIndex | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.1 | TNetworkIngressMeterId | not-accessible | The Meter ID is used as the secondary index to the table entry. |
| ROW tnNetworkIngressMeterRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.2 | RowStatus | read-create | Row Status of the entry. This allows creation/deletion of rows in this table. |
| TAD tnNetworkIngressMeterCIRAdaptation | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.5 | TAdaptationRule | read-create | The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
| TAD tnNetworkIngressMeterPIRAdaptation | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.6 | TAdaptationRule | read-create | The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
| TIN tnNetworkIngressMeterAdminPIR | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.7 | TIngressPIRRate | read-create | The administrative PIR specified by the user. |
| TIN tnNetworkIngressMeterAdminCIR | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.8 | TIngressCIRRate | read-create | The administrative CIR specified by the user. |
| TPI tnNetworkIngressMeterOperPIR | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.9 | TPIRRate | read-only | The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules. |
| TCI tnNetworkIngressMeterOperCIR | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.10 | TCIRRate | read-only | The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules. |
| TIM tnNetworkIngressMeterLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.11 | TimeStamp | read-only | Timestamp of last change to this row. |
| TME tnNetworkIngressMeterMode | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.12 | TMeterMode | read-create | Network Ingress Meter Mode |
| T/F tnNetworkIngressMeterMCast | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.13 | TruthValue | read-create | This object specifies if this is a multicast meter or not. |
| TME tnNetworkIngressMeterRateMode | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.14 | TMeterRateMode | read-create | Network Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime. |
| TIN tnNetworkIngressMeterAdminCBS | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.15 | TIngressBurstSize | read-create | The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter. |
| TIN tnNetworkIngressMeterAdminMBS | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.16 | TIngressBurstSize | read-create | The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter. |
| TIN tnNetworkIngressMeterOperCBS | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.17 | TIngressBurstSize | read-only | The operational value derived by computing the CBS value from the administrative CBS value |
| TIN tnNetworkIngressMeterOperMBS | 1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.26 | TIngressBurstSize | read-only | The operational value derived by computing the MBS value from the administrative MBS value |
| U32 tnSASNetworkIngressScalar1 | 1.3.6.1.4.1.7483.7.2.2.2.1.3.101 | Unsigned32 | read-only | A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item. |
| U32 tnSASNetworkIngressScalar2 | 1.3.6.1.4.1.7483.7.2.2.2.1.3.102 | Unsigned32 | read-only | |
| tnSASSlopeObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.4 | |||
| tnSASSlopePolicyExtnTable | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1 | not-accessible | Slope Policy Table. Additions for sas platform | |
| tnSASSlopePolicyExtnEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1 | not-accessible | Slope Policy Entry additions for sas platform. | |
| TSL tnSlopeHiQueue1DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.1 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeHiQueue2DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.2 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeHiQueue3DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.3 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeHiQueue4DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.4 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeHiQueue5DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.5 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeHiQueue6DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.6 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeHiQueue7DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.7 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeHiQueue8DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.8 | TSlopeDropRate | read-create | High Queue Drop Rate |
| TSL tnSlopeLoQueue1DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.9 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeLoQueue2DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.10 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeLoQueue3DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.11 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeLoQueue4DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.12 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeLoQueue5DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.13 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeLoQueue6DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.14 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeLoQueue7DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.15 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeLoQueue8DropRate | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.16 | TSlopeDropRate | read-create | Low Queue Drop Rate |
| TSL tnSlopeHiStartThreshold | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.17 | TSlopeThreshold | read-create | High slope Start Threshold.This object implies that once the shared buffer utilization reaches the start-threshold level then high-priority packets egressing out from a particular queue would be dropped at configured drop rate. |
| TSL tnSlopeLoStartThreshold | 1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.18 | TSlopeThreshold | read-create | Low slope Start Threshold.This implies that once the shared buffer utilization reaches the start-threshold level then low-priority packets egressing out from a particular queue would be dropped at configured drop rate. |
| tnSlopePolicyQueueTable | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2 | not-accessible | Slope Policy Per Queue Per Port additions for SAS-M platform. In SAS-M there are three slopes associated with a queue. One slope for Tcp Green packets, one for Tcp Yellow packets and one for Non Tcp Packets(both green and yellow packets). Each slope in turn can have four parameters defining its behavior | |
| tnSlopePolicyQueueEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1 | not-accessible | ||
| TQU tnSlopePolicyQueueId | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.1 | TQueueId | not-accessible | Queue for which slope policy is being defined |
| ROW tnSlopePolicyQueueRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.2 | RowStatus | read-create | Row Status of the entry. This allows creation/deletion of rows in this table. |
| TIM tnSlopePolicyQueueLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.3 | TimeStamp | read-only | Timestamp of last change to this row. |
| INT tnSlopePolicyQueueHiAdminStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.4 | INTEGER | read-create | tnSlopePolicyQueueHiAdminStatus specifies the admin state for the queue's high profile (Tcp Green Packets )slope. If the tnSlopePolicyQueueHiAdminStatus is set to 'down',the slope is inactive. |
| U32 tnSlopePolicyQueueHiStartAverage | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.5 | Unsigned32 | read-create | The percentage of the buffer utilized after which the drop probability starts to rise above 0. |
| U32 tnSlopePolicyQueueHiMaxAverage | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.6 | Unsigned32 | read-create | The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped. |
| TMA tnSlopePolicyQueueHiMaxProbability | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.7 | TMaxProbability | read-create | High Profile Max Probability.Defines the slope between the Start Average and Max Average |
| INT tnSlopePolicyQueueLoAdminStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.8 | INTEGER | read-create | tnSlopePolicyQueueLoAdminStatus specifies the admin state for the queue's low profile (Tcp Yellow Packets )slope. If the tnSlopePolicyQueueLoAdminStatus is set to 'down',the slope is inactive. |
| U32 tnSlopePolicyQueueLoStartAverage | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.9 | Unsigned32 | read-create | The percentage of the buffer utilized after which the drop probability starts to rise above 0. |
| U32 tnSlopePolicyQueueLoMaxAverage | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.10 | Unsigned32 | read-create | The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped. |
| TMA tnSlopePolicyQueueLoMaxProbability | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.11 | TMaxProbability | read-create | Low Profile Max Probability.Defines the slope between the Start Average and Max Average |
| INT tnSlopePolicyQueueNonTcpAdminStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.12 | INTEGER | read-create | tnSlopePolicyQueueNonTcpAdminStatus specifies the admin state for the queue's non tcp profile (Non Tcp Packets )slope. If the tnSlopePolicyQueueNonTcpAdminStatus is set to 'down',the slope is inactive. |
| U32 tnSlopePolicyQueueNonTcpStartAverage | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.13 | Unsigned32 | read-create | The percentage of the buffer utilized after which the drop probability starts to rise above 0. |
| U32 tnSlopePolicyQueueNonTcpMaxAverage | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.14 | Unsigned32 | read-create | The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped. |
| TMA tnSlopePolicyQueueNonTcpMaxProbability | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.15 | TMaxProbability | read-create | Non Tcp Profile Max Probability.Defines the slope between the Start Average and Max Average |
| U32 tnSlopePolicyQueueTimeAvgFactor | 1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.16 | Unsigned32 | read-create | The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization. |
| U32 tnSASSlopeScalar1 | 1.3.6.1.4.1.7483.7.2.2.2.1.4.101 | Unsigned32 | read-only | A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item. |
| U32 tnSASSlopeScalar2 | 1.3.6.1.4.1.7483.7.2.2.2.1.4.102 | Unsigned32 | read-only | |
| tnSASSchedulerObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.5 | |||
| tnSASPortSchedulerPlcyTable | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1 | not-accessible | The tnSASPortSchedulerPlcyTable has an entry for each port scheduler configured on this system. | |
| tnSASPortSchedulerPlcyEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1 | not-accessible | Each row represents a particular port scheduler. Entries are created and deleted by the user. | |
| TPL tnPortSchedulerPlcyMode | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.1 | TPlcyMode | read-create | Port Scheduler Policy Mode |
| TPL tnPortSchedulerPlcyQuanta | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.2 | TPlcyQuanta | read-create | Port Scheduler Policy Quanta |
| TQW tnPortSchedulerPlcyQueue1Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.3 | TQWeight | read-create | Port Scheduler Policy Queue 1 Weight |
| TQW tnPortSchedulerPlcyQueue2Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.4 | TQWeight | read-create | Port Scheduler Policy Queue 2 Weight |
| TQW tnPortSchedulerPlcyQueue3Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.5 | TQWeight | read-create | Port Scheduler Policy Queue 3 Weight |
| TQW tnPortSchedulerPlcyQueue4Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.6 | TQWeight | read-create | Port Scheduler Policy Queue 4 Weight |
| TQW tnPortSchedulerPlcyQueue5Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.7 | TQWeight | read-create | Port Scheduler Policy Queue 5 Weight |
| TQW tnPortSchedulerPlcyQueue6Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.8 | TQWeight | read-create | Port Scheduler Policy Queue 6 Weight |
| TQW tnPortSchedulerPlcyQueue7Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.9 | TQWeight | read-create | Port Scheduler Policy Queue 7 Weight |
| TQW tnPortSchedulerPlcyQueue8Weight | 1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.10 | TQWeight | read-create | Port Scheduler Policy Queue 8 Weight |
| tnQosFrameBasedAccntObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.6 | |||
| tnQosFrameBasedAccntTable | 1.3.6.1.4.1.7483.7.2.2.2.1.6.3 | not-accessible | A row in this table indicates whether Frame based accounting is enabled in the ingress and egress directions. | |
| tnQosFrameBasedAccntEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.6.3.1 | not-accessible | An entry indicating the ingress or egress state for frame based accounting. | |
| T/F tnQosIngressFrameBasedAccnt | 1.3.6.1.4.1.7483.7.2.2.2.1.6.3.1.1 | TruthValue | read-create | This object is used to enable frame based accounting for all the ingress meters in use by the pack. When this is enabled the ingress meters account for the IFG (12 bytes) + SFD (8 bytes) overhead associated with Ethernet frame. |
| T/F tnQosEgressFrameBasedAccnt | 1.3.6.1.4.1.7483.7.2.2.2.1.6.3.1.2 | TruthValue | read-create | This object is used to enable frame based accounting for all the egress queue shapers and the port egress rate shaper in use by the pack. When this is enabled the shapers account for the IFG (12 bytes) + SFD (8 bytes) overhead associated with Ethernet frame. |
| tnSASNetworkObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.7 | |||
| tnNetworkPolicyExtnTable | 1.3.6.1.4.1.7483.7.2.2.2.1.7.1 | not-accessible | Extension table to tnNetworkPolicyTable | |
| tnNetworkPolicyExtnEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1 | not-accessible | ||
| TNE tnNetworkPolicyType | 1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.1 | TNetworkPolicyType | read-create | Network policy Type determines the point of attachment of the network qos policy. Network policy with 'ipInterface' type can be attached to ip interface and 'port' type can be attached to physical port |
| TRE tnNetworkPolicyRemarkPolicyId | 1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.2 | TRemarkPolicyID | read-create | Remark Policy Id that be used. |
| INT tnNetworkIngressMeterColorMode | 1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.3 | INTEGER | read-create | tnNetworkIngressMeterColorMode indicates whether the ip interface is color-aware or color-blind. By default every ip interface is color-aware |
| TMP tnNetworkIngressMplsLspExpProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.4 | TMplsLspExpProfMapID | read-write | tnNetworkIngressMplsLspExpProfile attaches the MPLS LSP EXP Profile to this network policy. |
| INT tnNetworkEgressRemarkType | 1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.5 | INTEGER | read-create | This object specifies system remark type, tnNetworkPolicyEgressRemark will be set to true and tnNetworkEgressRemarkType will specify the remark type. |
| tnNetworkQueueExtnTable | 1.3.6.1.4.1.7483.7.2.2.2.1.7.2 | not-accessible | Extension table to tnNetworkQueueTable | |
| tnNetworkQueueExtnEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.7.2.1 | not-accessible | ||
| TNA tnNetworkQueuePolicyName | 1.3.6.1.4.1.7483.7.2.2.2.1.7.2.1.1 | TNamedItem | read-create | NetworkQueuePolicyName determines the queue management policy attached to this network queue. |
| tnMplsQosObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.8 | |||
| tMplsLspExpProfMapTable | 1.3.6.1.4.1.7483.7.2.2.2.1.8.1 | not-accessible | Information about all MPLS LSP EXP Profiles. | |
| tMplsLspExpProfMapEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1 | not-accessible | Information about one MPLS LSP EXP Profile | |
| TMP tMplsLspExpProfMapIndex | 1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.1 | TMplsLspExpProfMapID | not-accessible | The tMplsLspExpProfMapIndex is used as index for the table. |
| ROW tMplsLspExpProfMapRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.2 | RowStatus | read-create | Row Status of this profile entry. |
| TIT tMplsLspExpProfMapDescription | 1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.3 | TItemDescription | read-create | User-provided description of the policy. |
| TIM tMplsLspExpProfMapLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.4 | TimeStamp | read-only | timestamp of last change to this row in tMplsLspExpProfMapTable. |
| tMplsLspExpProfileTable | 1.3.6.1.4.1.7483.7.2.2.2.1.8.4 | not-accessible | ||
| tMplsLspExpProfileEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1 | not-accessible | Information about MPLS LSP EXP mapping. | |
| TMP tMplsLspExpProfileBits | 1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.1 | TMplsLspExpProfileValue | not-accessible | The MPLS Exp value to use for MPLS traffic. |
| ROW tMplsLspExpProfileRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.2 | RowStatus | read-create | Row Status of this profile entry. |
| TPR tMplsLspExpProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.3 | TProfile | read-create | tMplsLspExpProfile specifies the profile to be used for this EXP value as indicated by tMplsLspExpProfileBits. |
| TIM tMplsLspExpProfileLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.4 | TimeStamp | read-only | timestamp of last change to this row in tMplsLspExpProfileTable. |
| tnSASGeneralQosObjects | 1.3.6.1.4.1.7483.7.2.2.2.1.21 | |||
| tnSASRemarkPolicyTable | 1.3.6.1.4.1.7483.7.2.2.2.1.21.1 | not-accessible | ||
| tnSASRemarkPolicyEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1 | not-accessible | Information about a particular remarking policy's forwarding class mappings to dot1p / dscp / exp values. Entries are created/deleted by user. | |
| TRE tnSASRemarkPolicyId | 1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.1 | TRemarkPolicyID | not-accessible | The remark policy ID is used as index for the table. |
| ROW tnSASRemarkPolicyRowStatus | 1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.2 | RowStatus | read-create | Row Status. |
| TIT tnSASRemarkPolicyDescription | 1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.3 | TItemDescription | read-create | User-provided description of the policy. |
| INT tnSASRemarkPolicyType | 1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.4 | INTEGER | read-create | The remarking type of this policy. This specifies which of the fields will be remarked. |
| TIM tnSASRemarkPolicyLastChanged | 1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.5 | TimeStamp | read-only | Timestamp of last change to this row in tnSASRemarkPolicyTable. |
| tnSASRemarkPolicyFCTable | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2 | not-accessible | ||
| tnSASRemarkPolicyFCEntry | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1 | not-accessible | Information about a particular queue in a remarking policy's forwarding class mappings to dot1p / dscp / exp values. Entries are created/deleted whenever a policy is created/deleted. | |
| TFC tnSASRemarkPolicyFCName | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.1 | TFCName | not-accessible | The FC Class Name. |
| DOT tnSASRemarkPolicyDot1PInProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.2 | Dot1PPriority | read-write | The Dot1p to use for in-profile traffic. This field is valid only for the following remarking types: dot1p dot1p-dscp |
| DOT tnSASRemarkPolicyDot1POutProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.3 | Dot1PPriority | read-write | The Dot1p to use for out-of-profile traffic. This field is valid only for the following remarking types: dot1p dot1p-dscp |
| TDS tnSASRemarkPolicyDSCPInProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.4 | TDSCPNameOrEmpty | read-write | The DSCP to use for in-profile traffic. This field is valid only for remarking type of dscp and dot1p-dscp. |
| TDS tnSASRemarkPolicyDSCPOutProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.5 | TDSCPNameOrEmpty | read-write | The DSCP to use for out-of-profile traffic. This field is valid only for remarking type of dscp and dot1p-dscp. |
| TLS tnSASRemarkPolicyLspExpInProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.6 | TLspExpValue | read-write | The lsp-exp value to use for in-profile traffic. This field is valid only for remarking type of lsp-exp. |
| TLS tnSASRemarkPolicyLspExpOutProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.7 | TLspExpValue | read-write | The lsp-exp value to use for out-of-profile traffic. This field is valid only for remarking type of lsp-exp. |
| TDO tnSASRemarkPolicyDot1PLspExpInProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.8 | TDot1PLspExpValue | read-write | The Dot1p / MPLS Exp value to use for in-profile traffic. This field is valid only for remarking type of dot1p-lsp-exp-shared. |
| TDO tnSASRemarkPolicyDot1PLspExpOutProfile | 1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.9 | TDot1PLspExpValue | read-write | The Dot1p / MPLS Exp value to use for out-profile traffic. This field is valid only for remarking type of dot1p-lsp-exp-shared. |
RFC description
Provisions and manages Quality of Service features on Nokia 7x50 systems including traffic policies and queuing.
Start monitoring Nokia 7x50 / SAS service-edge router or switch (SAP ingress/egress QoS policy status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.