TN-MVR-MIB

All MIBs › TN-MVR-MIB

Organization: Transition Networks, Inc.

Last Updated: 2012-11-09

Category: Multicast, Transition Networks Media Converters

Description: Manages Transition Networks multicast VLAN registration group and port membership.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TN-MVR-MIB?

This Transition Networks MIB manages Multicast VLAN Registration (MVR), a feature that lets a single multicast VLAN deliver multicast streams (e.g., IPTV) to subscriber ports in different VLANs. It exposes global MVR mode configuration and per-interface MVR settings including VLAN ID, tagging mode, priority, and last-listener query interval (LLQI). It supports monitoring of the switch's multicast-service software configuration, letting an admin confirm which ports are operating as MVR receivers versus sources and clear/reset MVR statistics when troubleshooting stream delivery problems. It builds on the underlying IGMP snooping mechanism that MVR extends, though that dependency is implicit rather than explicitly imported here. It is typically deployed on Transition Networks access switches delivering multicast video/IPTV services to subscribers across VLAN boundaries, where TN-MVR-MIB SNMP monitoring helps confirm receiver ports are correctly configured for reliable multicast stream delivery.

IPNetwork Monitor allows you to monitor SNMP objects defined in TN-MVR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Transition Networks access/edge Ethernet switches

Monitoring Examples

An admin would check the tnMVRModeTable (tnMVRModeEntry) for the global tnMVRMode, then review the tnMVRInterfaceTable (tnMVRInterfaceEntry) to confirm a subscriber port's tnMVRInterfaceMode, tnMVRVID, and tnMVRInterfaceTagging settings. If a multicast stream isn't reaching a receiver port, verifying tnMVRName and tnMVRInterfacePriority against the expected multicast VLAN is a standard first step, and tnMVRStatisticsClear can reset counters before a fresh test. tnMVRInterfaceLLQI affects how quickly the switch detects a departed receiver.

What Can Be Monitored

MVR global mode
per-port MVR mode and VLAN assignment
interface tagging and priority
last-listener query interval

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From Q-BRIDGE-MIB

PortList
VlanIndex

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

From TRANSITION-SMI

tnProducts

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnMVRMIB	1.3.6.1.4.1.868.2.5.50			The mib module is designed for Multicast VLAN Registration.
tnMVRMIBNotifications	1.3.6.1.4.1.868.2.5.50.1
tnMVRMIBObjects	1.3.6.1.4.1.868.2.5.50.2
tnMVRMIBMgmt	1.3.6.1.4.1.868.2.5.50.2.1
tnMVRModeTable	1.3.6.1.4.1.868.2.5.50.2.1.1		not-accessible	This table contains MVR mode configuration.
tnMVRModeEntry	1.3.6.1.4.1.868.2.5.50.2.1.1.1		not-accessible	Each entry represents the MVR configuration on a device.
T/F tnMVRMode	1.3.6.1.4.1.868.2.5.50.2.1.1.1.1	TruthValue	read-write	To enable or disable the MVR on a device.
T/F tnMVRStatisticsClear	1.3.6.1.4.1.868.2.5.50.2.1.1.1.2	TruthValue	read-write	True for clearing statistics of MVR on a device.
tnMVRInterfaceTable	1.3.6.1.4.1.868.2.5.50.2.1.2		not-accessible	This table contains MVR VLAN interface settings.
tnMVRInterfaceEntry	1.3.6.1.4.1.868.2.5.50.2.1.2.1		not-accessible	Each entry represents a MVR interface on a device.
VLA tnMVRVID	1.3.6.1.4.1.868.2.5.50.2.1.2.1.1	VlanIndex	not-accessible	The multicast vlan id of a MVR interface.
STR tnMVRName	1.3.6.1.4.1.868.2.5.50.2.1.2.1.2	DisplayString	read-write	The name of a MVR interface.
INT tnMVRInterfaceMode	1.3.6.1.4.1.868.2.5.50.2.1.2.1.3	INTEGER	read-write	The mode of a MVR interface, either dynamic or compatible.
INT tnMVRInterfaceTagging	1.3.6.1.4.1.868.2.5.50.2.1.2.1.4	INTEGER	read-write	Specify whether the traversed IGMP/MLD control frames will be sent as Untagged or Tagged with MVR VID. The default is Tagged.
INT tnMVRInterfacePriority	1.3.6.1.4.1.868.2.5.50.2.1.2.1.5	INTEGER	read-write	Specify how the traversed IGMP/MLD control frames will be sent in prioritized manner. The default Priority is 0.
INT tnMVRInterfaceLLQI	1.3.6.1.4.1.868.2.5.50.2.1.2.1.6	INTEGER	read-write	Define the maximum time to wait for IGMP/MLD report memberships on a receiver port before removing the port from multicast group membership. The value is in units of tenths of a seconds. The range is from 0 to 31744. The default LLQI is 5 tenths or one-half second.
POR tnMVRInactivePortList	1.3.6.1.4.1.868.2.5.50.2.1.2.1.7	PortList	read-write	To indicate the ports as inactive when the relative bits are set to 1.
POR tnMVRSourcePortList	1.3.6.1.4.1.868.2.5.50.2.1.2.1.8	PortList	read-write	To indicate the ports as source when the relative bits are set to 1.
POR tnMVRReceiverPortList	1.3.6.1.4.1.868.2.5.50.2.1.2.1.9	PortList	read-write	To indicate the ports as receiver when the relative bits are set to 1.
ROW tnMVRInterfaceRowStatus	1.3.6.1.4.1.868.2.5.50.2.1.2.1.10	RowStatus	read-create	The row status of MVR interface table.
tnMVRImmediateLeaveTable	1.3.6.1.4.1.868.2.5.50.2.1.3		not-accessible	This table contains the immediate leave setting of MVR.
tnMVRImmediateLeaveEntry	1.3.6.1.4.1.868.2.5.50.2.1.3.1		not-accessible	Each entry represents MVR immediate leave on an interface.
T/F tnMVRImmediateLeaveEnabled	1.3.6.1.4.1.868.2.5.50.2.1.3.1.1	TruthValue	read-write	Enable or disable immediate leave on each interface.
tnMVRChannelConfigTable	1.3.6.1.4.1.868.2.5.50.2.1.4		not-accessible	This table contains MVR channel configuration.
tnMVRChannelConfigEntry	1.3.6.1.4.1.868.2.5.50.2.1.4.1		not-accessible	Each entry represents a MVR channel configuration.
VLA tnMVRChannelVID	1.3.6.1.4.1.868.2.5.50.2.1.4.1.1	VlanIndex	not-accessible	The multicast vlan id of a mvr channel. This id should exist in tnMVRInterfaceTable.
IPt tnMVRChannelStartEndAddrType	1.3.6.1.4.1.868.2.5.50.2.1.4.1.2	InetAddressType	not-accessible	The address type of MVR channel starting and ending address.
IP tnMVRChannelStartAddr	1.3.6.1.4.1.868.2.5.50.2.1.4.1.3	InetAddress	not-accessible	The starting ipv4/ipv6 multicast address of a MVR channel.
IP tnMVRChannelEndAddr	1.3.6.1.4.1.868.2.5.50.2.1.4.1.4	InetAddress	read-write	The ending ipv4/ipv6 multicast address of a MVR channel.
STR tnMVRChannelName	1.3.6.1.4.1.868.2.5.50.2.1.4.1.5	DisplayString	read-write	Indicate the name of the Channel of the specific Multicast VLAN. Maximum length of the Channel Name string is 32. Channel Name can only contain alphabets or numbers. Channel name should contain at least one alphabet. Channel name can be edited for the existing Channel entries or it can be added to the new entries.
ROW tnMVRChannelRowStatus	1.3.6.1.4.1.868.2.5.50.2.1.4.1.6	RowStatus	read-create	The row status of MVR channel configuration table.
tnMVRStatisticsTable	1.3.6.1.4.1.868.2.5.50.2.1.5		not-accessible	This table contains the statistics of MVR.
tnMVRStatisticsEntry	1.3.6.1.4.1.868.2.5.50.2.1.5.1		not-accessible	Each entry represents the MVR statistics of a specific vlan id.
INT tnMVRStatisticsVID	1.3.6.1.4.1.868.2.5.50.2.1.5.1.1	INTEGER	not-accessible	The multicast vlan id.
U32 tnMVRIGMPQueriesRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.2	Unsigned32	read-only	The number of Received Queries for IGMP.
U32 tnMVRMLDQueriesRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.3	Unsigned32	read-only	The number of Received Queries for MLD.
U32 tnMVRIGMPQueriesTx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.4	Unsigned32	read-only	The number of Transmitted Queries for IGMP.
U32 tnMVRMLDQueriesTx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.5	Unsigned32	read-only	The number of Transmitted Queries for MLD.
U32 tnMVRIGMPv1JoinsRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.6	Unsigned32	read-only	The number of Received IGMPv1 Joins.
U32 tnMVRIGMPv2ReportsRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.7	Unsigned32	read-only	The number of Received IGMPv2 Reports.
U32 tnMVRMLDv1ReportsRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.8	Unsigned32	read-only	The number of Received MLDv1 Reports.
U32 tnMVRIGMPv3ReportsRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.9	Unsigned32	read-only	The number of Received IGMPv3 Reports.
U32 tnMVRMLDv2ReportsRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.10	Unsigned32	read-only	The number of Received MLDv2 Reports.
U32 tnMVRIGMPv2LeavesRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.11	Unsigned32	read-only	The number of Received IGMPv2 Leaves.
U32 tnMVRMLDv1LeavesRx	1.3.6.1.4.1.868.2.5.50.2.1.5.1.12	Unsigned32	read-only	The number of Received MLDv1 Leaves.
tnMVRGroupInfoTable	1.3.6.1.4.1.868.2.5.50.2.1.6		not-accessible	This table contains MVR groups (channels) information.
tnMVRGroupInfoEntry	1.3.6.1.4.1.868.2.5.50.2.1.6.1		not-accessible	Each entry represents the group information for a specific vlan id.
INT tnMVRGroupVID	1.3.6.1.4.1.868.2.5.50.2.1.6.1.1	INTEGER	not-accessible	The vlan id of a MVR group.
IPt tnMVRGroupAddrType	1.3.6.1.4.1.868.2.5.50.2.1.6.1.2	InetAddressType	not-accessible	The MVR group ip address type.
IP tnMVRGroupAddr	1.3.6.1.4.1.868.2.5.50.2.1.6.1.3	InetAddress	not-accessible	The ipv4/ipv6 address of a MVR group.
POR tnMVRGroupPortMembers	1.3.6.1.4.1.868.2.5.50.2.1.6.1.4	PortList	read-only	To indicate which port is under the current group.
tnMVRSFMTable	1.3.6.1.4.1.868.2.5.50.2.1.7		not-accessible	This table contains the SFM(Source-Filtered Multicast) information of MVR.
tnMVRSFMEntry	1.3.6.1.4.1.868.2.5.50.2.1.7.1		not-accessible	Each entry represents the SFM information for a specific vlan id.
INT tnMVRSFMVID	1.3.6.1.4.1.868.2.5.50.2.1.7.1.1	INTEGER	not-accessible	The vlan id of a mvr group.
IPt tnMVRSFMGroupAddrType	1.3.6.1.4.1.868.2.5.50.2.1.7.1.2	InetAddressType	not-accessible	The ip address type of the mvr group.
IP tnMVRSFMGroupAddr	1.3.6.1.4.1.868.2.5.50.2.1.7.1.3	InetAddress	not-accessible	The ipv4/ipv6 group address.
NUM tnMVRSFMIfIndex	1.3.6.1.4.1.868.2.5.50.2.1.7.1.4	InterfaceIndex	not-accessible	The port number under the vlan and group.
INT tnMVRSFMMode	1.3.6.1.4.1.868.2.5.50.2.1.7.1.5	INTEGER	not-accessible	Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude.
IPt tnMVRSFMSourceAddrType	1.3.6.1.4.1.868.2.5.50.2.1.7.1.6	InetAddressType	not-accessible	The address type of the source.
IP tnMVRSFMSourceAddr	1.3.6.1.4.1.868.2.5.50.2.1.7.1.7	InetAddress	not-accessible	IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128. When there is no source filtering address, the text None is shown in the Source Address field.
INT tnMVRSFMType	1.3.6.1.4.1.868.2.5.50.2.1.7.1.8	INTEGER	read-only	To indicate the type of the SFM, either allow or deny.
T/F tnMVRSFMHardwareFilter	1.3.6.1.4.1.868.2.5.50.2.1.7.1.9	TruthValue	read-only	Indicates whether data plane destined to the specific group address from the source IPv4/IPv6 address could be handled by chip or not.
tnMVRMIBConformance	1.3.6.1.4.1.868.2.5.50.3

RFC description

Transition Networks Multicast VLAN Registration (MVR) configuration and management.

Start monitoring Transition Networks access/edge Ethernet switches (Multicast VLAN Registration config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TN-MVR-MIB

What Is TN-MVR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description