TN-MPLS-TP-MIB :: vRtrMplsTpLspPathMepBfdEnabled

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTN-MPLS-TP-MIBvRtrMplsTpLspPathMepBfdEnabled

vRtrMplsTpLspPathMepBfdEnabled

Module: TN-MPLS-TP-MIB

OID (symbolic): TN-MPLS-TP-MIB::vRtrMplsTpLspPathMepBfdEnabled

OID (numeric): 1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-create

Description: The value of vRtrMplsTpLspPathMepBfdEnabled specifies whether BFD is enabled or not.

If set to 'disabled (0)', BFD is not enabled. If set to 'cc (1)', BFD is enabled with Continuity Check (CC) functionality. If set to 'ccCv (2)', BFD is enabled with both CC and Connectivity Verification (CV) functionality. In this mode, BFD will detect mis-connectivity as described in RFC 6428 Section 3.7.2.

Once enabled, a modification to this object will effect the BFD session.

What is vRtrMplsTpLspPathMepBfdEnabled?

This read-create value specifies whether BFD is enabled on this MEP, and if so, in what mode: disabled(0), cc(1) for Continuity Check only, or ccCv(2) for Continuity Check plus Connectivity Verification, which per RFC 6428 can additionally detect mis-connectivity. Admins enable ccCv when they need to detect not just link failure but also misconnected/misrouted LSPs, at the cost of slightly more BFD overhead than plain CC. It defaults to disabled, and changing it once enabled affects the live BFD session.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7483tropicTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6tnProductsTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1tnSRMIBTROPIC-GLOBAL-REG
1.3.6.1.4.1.7483.6.1.2tnSRObjsTROPIC-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.7483.6.1.2.83vRtrMplsTpObjsTN-MPLS-TP-MIB
1.3.6.1.4.1.7483.6.1.2.83.2vRtrMplsTpConfigurationsTN-MPLS-TP-MIB
1.3.6.1.4.1.7483.6.1.2.83.2.3vRtrMplsTpLspObjectsTN-MPLS-TP-MIB
1.3.6.1.4.1.7483.6.1.2.83.2.3.3vRtrMplsTpLspPathMepTableTN-MPLS-TP-MIB
1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1vRtrMplsTpLspPathMepEntryTN-MPLS-TP-MIB
1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.6vRtrMplsTpLspPathMepBfdEnabledTN-MPLS-TP-MIB