All MIBs › TN-DHCP-SERVER-MIB
Organization: Transition Networks, Inc.
Last Updated: 2015-04-20
Category: DHCP, Transition Networks Media Converters
Description: Manages Transition Networks DHCP server pool configuration, leases, and exclusion ranges.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TN-DHCP-SERVER-MIB?
TN-DHCP-SERVER-MIB is a Transition Networks proprietary SNMP MIB for configuring and monitoring the device's built-in DHCP server function, including per-VLAN enable/disable mode and IP-address exclusion ranges that keep certain addresses out of the assigned pool. It exposes a global mode switch, a per-VLAN configuration table, and an exclusion-range table with configurable low/high IP boundaries and an associated action. While primarily a configuration MIB, it supports monitoring the software status of the DHCP service: whether DHCP serving is enabled globally and per-VLAN, essential to confirm the service is active where expected. There is no explicit dependency on other MIBs evident, though it naturally complements the companion TN-DHCP-SNOOPING-MIB for full DHCP visibility on the same switch. It is deployed on Transition Networks managed switches used as edge DHCP servers in small enterprise or industrial network segments. Engineers can download the TN-DHCP-SERVER-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TN-DHCP-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Transition Networks managed switch with embedded DHCP server
Monitoring Examples
An operator polls tnDhcpServerConfigGlobalsMode and, per interface, tnDhcpServerConfigVlanTable/tnDhcpServerConfigVlanEntry's tnDhcpServerConfigVlanMode to confirm DHCP serving is enabled on the intended VLANs. tnDhcpServerConfigExcludedTable/tnDhcpServerConfigExcludedEntry is checked to verify tnDhcpServerConfigExcludedLowIpAddress/HighIpAddress ranges correctly reserve statically-assigned addresses out of the dynamic pool, catching a misconfiguration that could cause an IP address conflict.
What Can Be Monitored
- global DHCP server mode
- per-VLAN DHCP mode
- excluded IP address ranges
- exclusion action
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
From TN-TC
| TNDisplayString | |
| TNInterfaceIndex | |
| TNRowEditorState | |
| TNUnsigned16 |
From TRANSITION-SMI
| tnProducts | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| tnDhcpServerMib | 1.3.6.1.4.1.868.2.5.146 | The mib module for DHCP settings. | ||
| tnDhcpServerMibObjects | 1.3.6.1.4.1.868.2.5.146.1 | |||
| tnDhcpServerConfig | 1.3.6.1.4.1.868.2.5.146.1.2 | |||
| tnDhcpServerConfigGlobals | 1.3.6.1.4.1.868.2.5.146.1.2.1 | |||
| T/F tnDhcpServerConfigGlobalsMode | 1.3.6.1.4.1.868.2.5.146.1.2.1.1 | TruthValue | read-write | Global mode of DHCP server. true is to enable the functions of DHCP server and false is to disable it. |
| tnDhcpServerConfigVlanTable | 1.3.6.1.4.1.868.2.5.146.1.2.2 | not-accessible | This is the table of DHCP server VLAN configuration. The index is VLAN ID. | |
| tnDhcpServerConfigVlanEntry | 1.3.6.1.4.1.868.2.5.146.1.2.2.1 | not-accessible | Each VLAN has a set of parameters | |
| NUM tnDhcpServerConfigVlanIfIndex | 1.3.6.1.4.1.868.2.5.146.1.2.2.1.1 | TNInterfaceIndex | not-accessible | Logical interface number of VLAN. |
| T/F tnDhcpServerConfigVlanMode | 1.3.6.1.4.1.868.2.5.146.1.2.2.1.2 | TruthValue | read-write | VLAN mode of DHCP server. true is to enable DHCP server per VLAN and false is to disable it per VLAN. |
| tnDhcpServerConfigExcludedTable | 1.3.6.1.4.1.868.2.5.146.1.2.3 | not-accessible | The table is DHCP server excluded IP onfiguration table. The indexes are low IP and high IP address. | |
| tnDhcpServerConfigExcludedEntry | 1.3.6.1.4.1.868.2.5.146.1.2.3.1 | not-accessible | Each entry has a set of parameters | |
| IP tnDhcpServerConfigExcludedLowIpAddress | 1.3.6.1.4.1.868.2.5.146.1.2.3.1.1 | IpAddress | not-accessible | Low IP address. |
| IP tnDhcpServerConfigExcludedHighIpAddress | 1.3.6.1.4.1.868.2.5.146.1.2.3.1.2 | IpAddress | not-accessible | High IP address. |
| TNR tnDhcpServerConfigExcludedAction | 1.3.6.1.4.1.868.2.5.146.1.2.3.1.100 | TNRowEditorState | read-write | Action |
| tnDhcpServerConfigExcludedIpTableRowEditor | 1.3.6.1.4.1.868.2.5.146.1.2.4 | |||
| IP tnDhcpServerConfigExcludedIpTableRowEditorLowIpAddress | 1.3.6.1.4.1.868.2.5.146.1.2.4.1 | IpAddress | read-write | Low IP address. |
| IP tnDhcpServerConfigExcludedIpTableRowEditorHighIpAddress | 1.3.6.1.4.1.868.2.5.146.1.2.4.2 | IpAddress | read-write | High IP address. |
| TNR tnDhcpServerConfigExcludedIpTableRowEditorAction | 1.3.6.1.4.1.868.2.5.146.1.2.4.100 | TNRowEditorState | read-write | Action |
| tnDhcpServerConfigPoolTable | 1.3.6.1.4.1.868.2.5.146.1.2.5 | not-accessible | The table is DHCP server pool onfiguration table. The indexe is pool name. | |
| tnDhcpServerConfigPoolEntry | 1.3.6.1.4.1.868.2.5.146.1.2.5.1 | not-accessible | Each entry has a set of parameters | |
| STR tnDhcpServerConfigPoolPoolName | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.1 | TNDisplayString | not-accessible | Name of DHCP pool. |
| TND tnDhcpServerConfigPoolPoolType | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.2 | TNDhcpServerPoolEnum | read-write | Type of pool. none(0) means the pool type is not defined yet. network(1) means the pool defines a pool of IP addresses to service more than one DHCP client. host(2) means the pool services for a specific DHCP client identified by client identifier or hardware address. |
| IP tnDhcpServerConfigPoolIpv4Address | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.3 | IpAddress | read-write | Network number of the subnet. If the pool type is of network, the IP address can be any general IP address. If the pool type is of host, the IP address must be a unicast IP address. |
| IP tnDhcpServerConfigPoolSubnetMask | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.4 | IpAddress | read-write | Subnet Mask. DHCP option 1. Specify subnet mask of the DHCP address pool, excluding 0.0.0.0 and 255.255.255.255. |
| IP tnDhcpServerConfigPoolSubnetBroadcast | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.5 | IpAddress | read-write | Broadcast IP address in the subnet. DHCP option 28. Specify the broadcast address in use on the client's subnet. |
| U32 tnDhcpServerConfigPoolLeaseDay | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.6 | Unsigned32 | read-write | Number of days of lease time. DHCP option 51, 58 and 59. The value range is 0-365. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite. |
| U32 tnDhcpServerConfigPoolLeaseHour | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.7 | Unsigned32 | read-write | Number of hours of lease time. DHCP option 51, 58 and 59. The value range is 0-23. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite. |
| U32 tnDhcpServerConfigPoolLeaseMinute | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.8 | Unsigned32 | read-write | Number of minutes of lease time. DHCP option 51, 58 and 59. The value range is 0-59. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite. |
| STR tnDhcpServerConfigPoolDomainName | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.9 | TNDisplayString | read-write | Domain name. DHCP option 15. Specify domain name that client should use when resolving hostname via DNS. |
| IP tnDhcpServerConfigPoolDefaultRouter1 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.10 | IpAddress | read-write | Default router 1. |
| IP tnDhcpServerConfigPoolDefaultRouter2 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.11 | IpAddress | read-write | Default router 2. |
| IP tnDhcpServerConfigPoolDefaultRouter3 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.12 | IpAddress | read-write | Default router 3. |
| IP tnDhcpServerConfigPoolDefaultRouter4 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.13 | IpAddress | read-write | Default router 4. |
| IP tnDhcpServerConfigPoolDnsServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.14 | IpAddress | read-write | DNS server 1. |
| IP tnDhcpServerConfigPoolDnsServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.15 | IpAddress | read-write | DNS server 2. |
| IP tnDhcpServerConfigPoolDnsServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.16 | IpAddress | read-write | DNS server 3. |
| IP tnDhcpServerConfigPoolDnsServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.17 | IpAddress | read-write | DNS server 4. |
| IP tnDhcpServerConfigPoolNtpServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.18 | IpAddress | read-write | NTP server 1. |
| IP tnDhcpServerConfigPoolNtpServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.19 | IpAddress | read-write | NTP server 2. |
| IP tnDhcpServerConfigPoolNtpServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.20 | IpAddress | read-write | NTP server 3. |
| IP tnDhcpServerConfigPoolNtpServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.21 | IpAddress | read-write | NTP server 4. |
| TND tnDhcpServerConfigPoolNetbiosNodeType | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.22 | TNDhcpServerNetbiosNodeEnum | read-write | Type of NetBIOS node. DHCP option 46. Specify NetBIOS node type option to allow Netbios over TCP/IP clients which are configurable to be configured as described in RFC 1001/1002. nodeNone(0) means the node type is not defined yet. nodeB(1) means the node type is type of B. nodeP(2) means the node type is type of P. nodeM(3) means the node type is type of M. nodeH(4) means the node type is type of H. |
| STR tnDhcpServerConfigPoolNetbiosScope | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.23 | TNDisplayString | read-write | NetBIOS scope. DHCP option 47. Specify the NetBIOS over TCP/IP scope parameter for the client as specified in RFC 1001/1002. |
| IP tnDhcpServerConfigPoolNetbiosNameServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.24 | IpAddress | read-write | NetBIOS name server 1. |
| IP tnDhcpServerConfigPoolNetbiosNameServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.25 | IpAddress | read-write | NetBIOS name server 2. |
| IP tnDhcpServerConfigPoolNetbiosNameServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.26 | IpAddress | read-write | NetBIOS name server 3. |
| IP tnDhcpServerConfigPoolNetbiosNameServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.27 | IpAddress | read-write | NetBIOS name server 4. |
| STR tnDhcpServerConfigPoolNisDomainName | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.28 | TNDisplayString | read-write | NIS Domain Name. DHCP option 40. Specify the name of the client's NIS domain. |
| IP tnDhcpServerConfigPoolNisServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.29 | IpAddress | read-write | NIS server 1. |
| IP tnDhcpServerConfigPoolNisServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.30 | IpAddress | read-write | NIS server 2. |
| IP tnDhcpServerConfigPoolNisServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.31 | IpAddress | read-write | NIS server 3. |
| IP tnDhcpServerConfigPoolNisServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.32 | IpAddress | read-write | NIS server 4. |
| OID tnDhcpServerConfigPoolClientIdentifierType | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.33 | TNDhcpServerClientIdentifierEnum | read-write | Type of client identifier. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. none(0) means the client identifier type is not defined yet. fqdn(1) means the client identifier type is type of FQDN (Fully Qualified Domain Name). mac(2) means the client identifier type is type of MAC address. |
| STR tnDhcpServerConfigPoolClientIdentifierFqdn | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.34 | TNDisplayString | read-write | Client's Fully Qualified Domain Name. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined fqdn(1). |
| MAC tnDhcpServerConfigPoolClientIdentifierMac | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.35 | MacAddress | read-write | Client's MAC address. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined as mac(2). |
| MAC tnDhcpServerConfigPoolClientHardwareAddress | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.36 | MacAddress | read-write | Client's hardware address. Specify client's hardware(MAC) address to be used when the pool is the type of host. |
| STR tnDhcpServerConfigPoolClientName | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.37 | TNDisplayString | read-write | Client name. DHCP option 12. Specify the name of client to be used when the pool is the type of host. |
| STR tnDhcpServerConfigPoolVendorClassId1 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.38 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolVendorSpecificInfo1 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.39 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| STR tnDhcpServerConfigPoolVendorClassId2 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.40 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolVendorSpecificInfo2 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.41 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| STR tnDhcpServerConfigPoolVendorClassId3 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.42 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolVendorSpecificInfo3 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.43 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| STR tnDhcpServerConfigPoolVendorClassId4 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.44 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolVendorSpecificInfo4 | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.45 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| TNR tnDhcpServerConfigPoolAction | 1.3.6.1.4.1.868.2.5.146.1.2.5.1.100 | TNRowEditorState | read-write | Action |
| tnDhcpServerConfigPoolTableRowEditor | 1.3.6.1.4.1.868.2.5.146.1.2.6 | |||
| STR tnDhcpServerConfigPoolTableRowEditorPoolName | 1.3.6.1.4.1.868.2.5.146.1.2.6.1 | TNDisplayString | read-write | Name of DHCP pool. |
| TND tnDhcpServerConfigPoolTableRowEditorPoolType | 1.3.6.1.4.1.868.2.5.146.1.2.6.2 | TNDhcpServerPoolEnum | read-write | Type of pool. none(0) means the pool type is not defined yet. network(1) means the pool defines a pool of IP addresses to service more than one DHCP client. host(2) means the pool services for a specific DHCP client identified by client identifier or hardware address. |
| IP tnDhcpServerConfigPoolTableRowEditorIpv4Address | 1.3.6.1.4.1.868.2.5.146.1.2.6.3 | IpAddress | read-write | Network number of the subnet. If the pool type is of network, the IP address can be any general IP address. If the pool type is of host, the IP address must be a unicast IP address. |
| IP tnDhcpServerConfigPoolTableRowEditorSubnetMask | 1.3.6.1.4.1.868.2.5.146.1.2.6.4 | IpAddress | read-write | Subnet Mask. DHCP option 1. Specify subnet mask of the DHCP address pool, excluding 0.0.0.0 and 255.255.255.255. |
| IP tnDhcpServerConfigPoolTableRowEditorSubnetBroadcast | 1.3.6.1.4.1.868.2.5.146.1.2.6.5 | IpAddress | read-write | Broadcast IP address in the subnet. DHCP option 28. Specify the broadcast address in use on the client's subnet. |
| U32 tnDhcpServerConfigPoolTableRowEditorLeaseDay | 1.3.6.1.4.1.868.2.5.146.1.2.6.6 | Unsigned32 | read-write | Number of days of lease time. DHCP option 51, 58 and 59. The value range is 0-365. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite. |
| U32 tnDhcpServerConfigPoolTableRowEditorLeaseHour | 1.3.6.1.4.1.868.2.5.146.1.2.6.7 | Unsigned32 | read-write | Number of hours of lease time. DHCP option 51, 58 and 59. The value range is 0-23. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite. |
| U32 tnDhcpServerConfigPoolTableRowEditorLeaseMinute | 1.3.6.1.4.1.868.2.5.146.1.2.6.8 | Unsigned32 | read-write | Number of minutes of lease time. DHCP option 51, 58 and 59. The value range is 0-59. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite. |
| STR tnDhcpServerConfigPoolTableRowEditorDomainName | 1.3.6.1.4.1.868.2.5.146.1.2.6.9 | TNDisplayString | read-write | Domain name. DHCP option 15. Specify domain name that client should use when resolving hostname via DNS. |
| IP tnDhcpServerConfigPoolTableRowEditorDefaultRouter1 | 1.3.6.1.4.1.868.2.5.146.1.2.6.10 | IpAddress | read-write | Default router 1. |
| IP tnDhcpServerConfigPoolTableRowEditorDefaultRouter2 | 1.3.6.1.4.1.868.2.5.146.1.2.6.11 | IpAddress | read-write | Default router 2. |
| IP tnDhcpServerConfigPoolTableRowEditorDefaultRouter3 | 1.3.6.1.4.1.868.2.5.146.1.2.6.12 | IpAddress | read-write | Default router 3. |
| IP tnDhcpServerConfigPoolTableRowEditorDefaultRouter4 | 1.3.6.1.4.1.868.2.5.146.1.2.6.13 | IpAddress | read-write | Default router 4. |
| IP tnDhcpServerConfigPoolTableRowEditorDnsServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.6.14 | IpAddress | read-write | DNS server 1. |
| IP tnDhcpServerConfigPoolTableRowEditorDnsServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.6.15 | IpAddress | read-write | DNS server 2. |
| IP tnDhcpServerConfigPoolTableRowEditorDnsServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.6.16 | IpAddress | read-write | DNS server 3. |
| IP tnDhcpServerConfigPoolTableRowEditorDnsServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.6.17 | IpAddress | read-write | DNS server 4. |
| IP tnDhcpServerConfigPoolTableRowEditorNtpServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.6.18 | IpAddress | read-write | NTP server 1. |
| IP tnDhcpServerConfigPoolTableRowEditorNtpServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.6.19 | IpAddress | read-write | NTP server 2. |
| IP tnDhcpServerConfigPoolTableRowEditorNtpServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.6.20 | IpAddress | read-write | NTP server 3. |
| IP tnDhcpServerConfigPoolTableRowEditorNtpServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.6.21 | IpAddress | read-write | NTP server 4. |
| TND tnDhcpServerConfigPoolTableRowEditorNetbiosNodeType | 1.3.6.1.4.1.868.2.5.146.1.2.6.22 | TNDhcpServerNetbiosNodeEnum | read-write | Type of NetBIOS node. DHCP option 46. Specify NetBIOS node type option to allow Netbios over TCP/IP clients which are configurable to be configured as described in RFC 1001/1002. nodeNone(0) means the node type is not defined yet. nodeB(1) means the node type is type of B. nodeP(2) means the node type is type of P. nodeM(3) means the node type is type of M. nodeH(4) means the node type is type of H. |
| STR tnDhcpServerConfigPoolTableRowEditorNetbiosScope | 1.3.6.1.4.1.868.2.5.146.1.2.6.23 | TNDisplayString | read-write | NetBIOS scope. DHCP option 47. Specify the NetBIOS over TCP/IP scope parameter for the client as specified in RFC 1001/1002. |
| IP tnDhcpServerConfigPoolTableRowEditorNetbiosNameServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.6.24 | IpAddress | read-write | NetBIOS name server 1. |
| IP tnDhcpServerConfigPoolTableRowEditorNetbiosNameServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.6.25 | IpAddress | read-write | NetBIOS name server 2. |
| IP tnDhcpServerConfigPoolTableRowEditorNetbiosNameServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.6.26 | IpAddress | read-write | NetBIOS name server 3. |
| IP tnDhcpServerConfigPoolTableRowEditorNetbiosNameServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.6.27 | IpAddress | read-write | NetBIOS name server 4. |
| STR tnDhcpServerConfigPoolTableRowEditorNisDomainName | 1.3.6.1.4.1.868.2.5.146.1.2.6.28 | TNDisplayString | read-write | NIS Domain Name. DHCP option 40. Specify the name of the client's NIS domain. |
| IP tnDhcpServerConfigPoolTableRowEditorNisServer1 | 1.3.6.1.4.1.868.2.5.146.1.2.6.29 | IpAddress | read-write | NIS server 1. |
| IP tnDhcpServerConfigPoolTableRowEditorNisServer2 | 1.3.6.1.4.1.868.2.5.146.1.2.6.30 | IpAddress | read-write | NIS server 2. |
| IP tnDhcpServerConfigPoolTableRowEditorNisServer3 | 1.3.6.1.4.1.868.2.5.146.1.2.6.31 | IpAddress | read-write | NIS server 3. |
| IP tnDhcpServerConfigPoolTableRowEditorNisServer4 | 1.3.6.1.4.1.868.2.5.146.1.2.6.32 | IpAddress | read-write | NIS server 4. |
| OID tnDhcpServerConfigPoolTableRowEditorClientIdentifierType | 1.3.6.1.4.1.868.2.5.146.1.2.6.33 | TNDhcpServerClientIdentifierEnum | read-write | Type of client identifier. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. none(0) means the client identifier type is not defined yet. fqdn(1) means the client identifier type is type of FQDN (Fully Qualified Domain Name). mac(2) means the client identifier type is type of MAC address. |
| STR tnDhcpServerConfigPoolTableRowEditorClientIdentifierFqdn | 1.3.6.1.4.1.868.2.5.146.1.2.6.34 | TNDisplayString | read-write | Client's Fully Qualified Domain Name. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined fqdn(1). |
| MAC tnDhcpServerConfigPoolTableRowEditorClientIdentifierMac | 1.3.6.1.4.1.868.2.5.146.1.2.6.35 | MacAddress | read-write | Client's MAC address. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined as mac(2). |
| MAC tnDhcpServerConfigPoolTableRowEditorClientHardwareAddress | 1.3.6.1.4.1.868.2.5.146.1.2.6.36 | MacAddress | read-write | Client's hardware address. Specify client's hardware(MAC) address to be used when the pool is the type of host. |
| STR tnDhcpServerConfigPoolTableRowEditorClientName | 1.3.6.1.4.1.868.2.5.146.1.2.6.37 | TNDisplayString | read-write | Client name. DHCP option 12. Specify the name of client to be used when the pool is the type of host. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorClassId1 | 1.3.6.1.4.1.868.2.5.146.1.2.6.38 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorSpecificInfo1 | 1.3.6.1.4.1.868.2.5.146.1.2.6.39 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorClassId2 | 1.3.6.1.4.1.868.2.5.146.1.2.6.40 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorSpecificInfo2 | 1.3.6.1.4.1.868.2.5.146.1.2.6.41 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorClassId3 | 1.3.6.1.4.1.868.2.5.146.1.2.6.42 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorSpecificInfo3 | 1.3.6.1.4.1.868.2.5.146.1.2.6.43 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorClassId4 | 1.3.6.1.4.1.868.2.5.146.1.2.6.44 | TNDisplayString | read-write | Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier. |
| STR tnDhcpServerConfigPoolTableRowEditorVendorSpecificInfo4 | 1.3.6.1.4.1.868.2.5.146.1.2.6.45 | TNDisplayString | read-write | Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information. |
| TNR tnDhcpServerConfigPoolTableRowEditorAction | 1.3.6.1.4.1.868.2.5.146.1.2.6.100 | TNRowEditorState | read-write | Action |
| tnDhcpServerStatus | 1.3.6.1.4.1.868.2.5.146.1.3 | |||
| tnDhcpServerStatusDeclinedTable | 1.3.6.1.4.1.868.2.5.146.1.3.1 | not-accessible | This is a table of IP addresses declined by DHCP client. | |
| tnDhcpServerStatusDeclinedEntry | 1.3.6.1.4.1.868.2.5.146.1.3.1.1 | not-accessible | Each entry has a declined IP address. | |
| I32 tnDhcpServerStatusDeclinedEntryNo | 1.3.6.1.4.1.868.2.5.146.1.3.1.1.1 | Integer32 | not-accessible | The number of entry. The number starts from 1. |
| IP tnDhcpServerStatusDeclinedIpv4Address | 1.3.6.1.4.1.868.2.5.146.1.3.1.1.2 | IpAddress | read-only | IPv4 address declined by DHCP client. |
| tnDhcpServerStatusStatistics | 1.3.6.1.4.1.868.2.5.146.1.3.2 | |||
| U32 tnDhcpServerStatusStatisticsDiscoverCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.1 | Unsigned32 | read-only | Number of DHCP DISCOVER messages received. |
| U32 tnDhcpServerStatusStatisticsOfferCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.2 | Unsigned32 | read-only | Number of DHCP OFFER messages sent. |
| U32 tnDhcpServerStatusStatisticsRequestCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.3 | Unsigned32 | read-only | Number of DHCP REQUEST messages received. |
| U32 tnDhcpServerStatusStatisticsAckCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.4 | Unsigned32 | read-only | Number of DHCP ACK messages sent. |
| U32 tnDhcpServerStatusStatisticsNakCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.5 | Unsigned32 | read-only | Number of DHCP NAK messages sent. |
| U32 tnDhcpServerStatusStatisticsDeclineCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.6 | Unsigned32 | read-only | Number of DHCP DECLINE messages received. |
| U32 tnDhcpServerStatusStatisticsReleaseCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.7 | Unsigned32 | read-only | Number of DHCP RELEASE messages received. |
| U32 tnDhcpServerStatusStatisticsInformCnt | 1.3.6.1.4.1.868.2.5.146.1.3.2.8 | Unsigned32 | read-only | Number of DHCP INFORM messages received. |
| tnDhcpServerStatusBindingTable | 1.3.6.1.4.1.868.2.5.146.1.3.3 | not-accessible | This is a table of binding data. | |
| tnDhcpServerStatusBindingEntry | 1.3.6.1.4.1.868.2.5.146.1.3.3.1 | not-accessible | Each entry has the binding data. | |
| IP tnDhcpServerStatusBindingIpAddress | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.1 | IpAddress | not-accessible | IP address. |
| TND tnDhcpServerStatusBindingState | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.2 | TNDhcpServerBindingStateEnum | read-only | State of binding. none(0) means the binding is not in use. allocated(1) means the binding is allocated to the new DHCP client who send DHCPDISCOVER. committed(2) means the binding is committed as the DHCP process is completed successfully. expired(3) means the lease of the binding expired. |
| TND tnDhcpServerStatusBindingType | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.3 | TNDhcpServerBindingEnum | read-only | Type of binding. none(0) means the binding is not in use. automatic(1) means the binding is mapped to network-type pool. manual(2) means the binding is mapped to host-type pool. expired(3) means the lease of the binding expired. |
| STR tnDhcpServerStatusBindingPoolName | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.4 | TNDisplayString | read-only | Name of the pool that creates the binding. |
| IP tnDhcpServerStatusBindingServerId | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.5 | IpAddress | read-only | IP address of the DHCP server to service the binding. |
| TNU tnDhcpServerStatusBindingVlanId | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.6 | TNUnsigned16 | read-only | The VLAN where the binding works on. |
| IP tnDhcpServerStatusBindingSubnetMask | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.7 | IpAddress | read-only | Subnet mask of the DHCP client. |
| OID tnDhcpServerStatusBindingClientIdentifierType | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.8 | TNDhcpServerClientIdentifierEnum | read-only | Type of client identifier. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. none(0) means the client identifier type is not defined yet. fqdn(1) means the client identifier type is type of FQDN (Fully Qualified Domain Name). mac(2) means the client identifier type is type of MAC address. |
| STR tnDhcpServerStatusBindingClientIdentifierFqdn | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.9 | TNDisplayString | read-only | Client's Fully Qualified Domain Name. DHCP option 61. |
| MAC tnDhcpServerStatusBindingClientIdentifierMac | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.10 | MacAddress | read-only | Client's MAC address. DHCP option 61. |
| MAC tnDhcpServerStatusBindingMacAddress | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.11 | MacAddress | read-only | MAC address of the DHCP client. |
| STR tnDhcpServerStatusBindingLease | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.12 | TNDisplayString | read-only | Lease time of the binding. |
| STR tnDhcpServerStatusBindingTimeToExpire | 1.3.6.1.4.1.868.2.5.146.1.3.3.1.13 | TNDisplayString | read-only | remaining time to expire. |
| tnDhcpServerControl | 1.3.6.1.4.1.868.2.5.146.1.4 | |||
| tnDhcpServerControlStatistics | 1.3.6.1.4.1.868.2.5.146.1.4.1 | |||
| T/F tnDhcpServerControlStatisticsClear | 1.3.6.1.4.1.868.2.5.146.1.4.1.1 | TruthValue | read-write | Clear all statistics. |
| tnDhcpServerControlBinding | 1.3.6.1.4.1.868.2.5.146.1.4.2 | |||
| IP tnDhcpServerControlBindingClearByIp | 1.3.6.1.4.1.868.2.5.146.1.4.2.1 | IpAddress | read-write | Clear binding with the IP address. If 0.0.0.0 then do nothing. |
| TND tnDhcpServerControlBindingClearByType | 1.3.6.1.4.1.868.2.5.146.1.4.2.2 | TNDhcpServerBindingEnum | read-write | Clear binding by binding type. If none(0) then do nothing. |
| tnDhcpServerMibConformance | 1.3.6.1.4.1.868.2.5.146.2 | |||
| tnDhcpServerMibCompliances | 1.3.6.1.4.1.868.2.5.146.2.1 | |||
| tnDhcpServerMibCompliance | 1.3.6.1.4.1.868.2.5.146.2.1.1 | The compliance statement for the implementation. | ||
| tnDhcpServerMibGroups | 1.3.6.1.4.1.868.2.5.146.2.2 | |||
| tnDhcpServerConfigGlobalsInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.1 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerConfigVlanTableInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.2 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerConfigExcludedTableInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.3 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerConfigExcludedIpTableRowEditorInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.4 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerConfigPoolTableInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.5 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerConfigPoolTableRowEditorInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.6 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerStatusDeclinedTableInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.7 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerStatusStatisticsInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.8 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerStatusBindingTableInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.9 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerControlStatisticsInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.10 | A collection of objects suitable for bulk operations. | ||
| tnDhcpServerControlBindingInfoGroup | 1.3.6.1.4.1.868.2.5.146.2.2.11 | A collection of objects suitable for bulk operations. |
RFC description
DHCP server configuration management for Transition Networks devices including client bindings and pool settings.
Start monitoring Transition Networks managed switch with embedded DHCP server (per-VLAN enable/exclusion-range config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.