TERRA-sdi410C-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TERRA-sdi410C-MIB

Organization: TERRA Electronics

Last Updated: 2017-10-09

Category: Broadcast and Signal Distribution Equipment

Description: Manages TERRA Electronics SDI-410C SDI signal distribution and modulation equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TERRA-sdi410C-MIB?

TERRA-sdi410C-MIB manages the TERRA SDI-410C, a DVB-S/S2-to-IP streamer used in satellite broadcast/DVB distribution, a product from TERRA Electronics. Based on its module description, it is expected to expose device configuration and operational data related to satellite signal reception and IP stream output, though no specific object or table names were supplied for this module. It would be used to monitor the hardware/software status of the streamer — such as satellite tuner lock and IP output streaming state — to catch signal loss or streaming interruptions, consistent with its role as broadcast head-end equipment. It sits under the TERRA-SMI enterprise structure and likely references TERRA-PRODUCTS-MIB for its product identifier. It is deployed in satellite broadcast head-ends or IP distribution facilities converting DVB-S/S2 satellite feeds to IP multicast streams. Engineers can download the TERRA-sdi410C-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TERRA-sdi410C-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • TERRA SDI-410C DVB-S/S2 to IP streamer

Monitoring Examples

No object or table names were provided for this module (sample_objects is empty), so specific identifiers cannot be cited. Based on its description as a DVB-S/S2-to-IP streamer, an operator would typically want to monitor satellite signal lock status and IP output stream health to detect a lost satellite feed or a broken IP multicast stream, but a concrete polling example cannot be given without confirmed object names.

What Can Be Monitored

  • satellite signal reception status
  • IP output streaming status
  • device operational state

This MIB depends on

Related MIBs

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TERRA-DEFINITIONS-MIB

DefStatus

From TERRA-PRODUCTS-MIB

terraProductsMODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using inBR OID:

Select a TERRA SDI-410C DVB-S/S2 to IP streamer (satellite tuner-lock/IP output status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type inBR into the Find box to locate it in the OID tree, then select it and click OK. It reports the input bitrate in kbps. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

TERRA Electronics platform-specific MIB for the sdi410C DVB-S/S2 to IP streamer device management (vendor product MIB).

Start monitoring TERRA SDI-410C DVB-S/S2 to IP streamer (satellite tuner-lock/IP output status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TERRA-sdi410C-MIB