All MIBs › TERRA-sdi410C-MIB › fec
fec
Module: TERRA-sdi410C-MIB
OID (symbolic): TERRA-sdi410C-MIB::fec
OID (numeric): 1.3.6.1.4.1.30631.1.8.1.27.7
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Forward error correction
What is fec?
This value reports the forward error correction rate in use on the incoming satellite signal, such as 3/4 or 5/6. Admins check it against the transponder's published FEC setting to confirm the receiver has locked correctly. A mismatch typically causes elevated bit or packet error rates alongside this reading.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.30631.1.8.1.27.7 snmpwalk -v2c -c public <target> TERRA-sdi410C-MIB::fec
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.30631.1.8.1.27.7.1 snmpget -v2c -c public <target> TERRA-sdi410C-MIB::fec.1
Start monitoring TERRA SDI-410C DVB-S/S2 to IP streamer (satellite tuner-lock/IP output status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TERRA-sdi410C-MIB::fec OID value, configure state conditions and alerts, and monitor any TERRA SDI-410C DVB-S/S2 to IP streamer (satellite tuner-lock/IP output status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.30631 | terraRoot | TERRA-SMI |
| 1.3.6.1.4.1.30631.1 | terraProducts | TERRA-PRODUCTS-MIB |
| 1.3.6.1.4.1.30631.1.8 | terra_sdi410C | TERRA-PRODUCTS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.30631.1.8.1 | sdi410cstatus | TERRA-sdi410C-MIB |
| 1.3.6.1.4.1.30631.1.8.1.27 | inputStatus | TERRA-sdi410C-MIB |
| 1.3.6.1.4.1.30631.1.8.1.27.7 | fec | TERRA-sdi410C-MIB |