TERM-PROT-MIB

All MIBs › TERM-PROT-MIB

Organization: CommWorks Corporation, a 3Com Company

Last Updated: 2002-08-23

Category: Network Access and Authentication

Description: Manages CommWorks/3Com terminal protection protocol sessions and security state for access devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TERM-PROT-MIB?

TERM-PROT-MIB is a CommWorks Corporation (a 3Com Company, U.S. Robotics heritage) proprietary MIB configuring Terminal Protocol (Telnet/rlogin) access on the commWorks remote-access platform. Its objects cover a config-modified flag, config file name, connected-message text, Telnet-escape enable, allow-manage-users flag, Telnet trying/disconnect message flags, Telnet client-access control, a Telnet-access table (IP address/mask, status), Telnet terminal-download mode, rlogin-escape enable, a banner-file setting, and a CTCP encryption table (ID, key, status). As a configuration/security MIB it lets an administrator confirm which IP addresses are permitted Telnet/rlogin terminal access and whether CTCP encryption is enforced. It is deployed on CommWorks (3Com/U.S. Robotics) remote-access platforms. Engineers can download the TERM-PROT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TERM-PROT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

CommWorks (3Com/U.S. Robotics) remote-access platforms

Monitoring Examples

An administrator checks usrTelnetAccessTable and usrCTCPEncryptionStatus to confirm which addresses can reach the terminal interface and whether encryption is enforced on a CommWorks (3Com) remote-access platform.

What Can Be Monitored

Terminal Protocol (Telnet/rlogin) access control and encryption

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From USR-DEFINITIONS-MIB

UsrConfigStatus
common	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
usrTermProt	1.3.6.1.4.1.429.4.18			The commWorks enterprise defined MIB objects for Terminal Protocols Process.
USR usrTermProtCFMStatusFlag	1.3.6.1.4.1.429.4.18.1	UsrConfigStatus	read-write	This variable controls saving and loading of configuration information for the Terminal Protocols Module. The value can be set to either save or load by a management station. The other values indicate if any configuration operation and what type is in progress.
STR usrTermProtCfgFileName	1.3.6.1.4.1.429.4.18.2	DisplayString	read-only	The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Terminal Protocols module uses the default name `@file://TermProt.cfg'.
STR usrTermProtConnectedMsg	1.3.6.1.4.1.429.4.18.3	DisplayString	read-write	The string which is displayed when a ClearTCP client session is connected to the remote TCP host. If the value of this object is an empty string, the Terminal Protocols module uses a default of CONNECTED
INT usrTermProtTelnetEscEnabled	1.3.6.1.4.1.429.4.18.4	INTEGER	read-write	If set to DISABLED, this object prevents all Telnet Clients from using the escape character during a session. If they enter that character, it will be sent as regular text. If set to ENABLED, the user will be permitted to enter the escape character to use the local Telnet command line.
INT usrTermProtAllowManageUsers	1.3.6.1.4.1.429.4.18.5	INTEGER	read-write	This variable turns on/off the ability to manage the system through telnet server connections.
INT usrTermProtTelnetShowTryingMsg	1.3.6.1.4.1.429.4.18.6	INTEGER	read-write	This variable turns on/off the trying status message for telnet to terminal servers.
INT usrTermProtTelnetClientAccess	1.3.6.1.4.1.429.4.18.7	INTEGER	read-write	This indicates whether to use the client access table. By default, this value will be disabled. If set to enabled, the users can telnet into the HARC only from ip addresses added in the client access table. If the value if set to disabled, the client access table is not referred to.
usrTelnetAccessTable	1.3.6.1.4.1.429.4.18.8		not-accessible	The Telnet access table
usrTelnetAccessEntry	1.3.6.1.4.1.429.4.18.8.1		not-accessible
IP usrTelnetAccessIpAddr	1.3.6.1.4.1.429.4.18.8.1.1	IpAddress	not-accessible	The IP Address of the station allowed for telnet into HiPerARC.
INT usrTelnetAccessStatus	1.3.6.1.4.1.429.4.18.8.1.2	INTEGER	read-write	The status of the entry for this address.
IP usrTelnetAccessIpMask	1.3.6.1.4.1.429.4.18.8.1.3	IpAddress	read-write	The IP Address of the station allowed for telnet into HiPerARC.
INT usrTelnetTerminalDownloadMode	1.3.6.1.4.1.429.4.18.9	INTEGER	read-write	Will cause telnet client on non-23 port disable ECHO in local and remote side
INT usrTermProtRloginEscEnabled	1.3.6.1.4.1.429.4.18.10	INTEGER	read-write	If set to disabled, this object prevents all Rlogin Clients from using the escape character during a session. If they enter that character, it will be sent as regular text. If set to enabled, the user will be permitted to enter the escape character to use the local Telnet command line.
INT usrTermProtTelnetShowDisconnect	1.3.6.1.4.1.429.4.18.11	INTEGER	read-write	This variable enabled/disables the disconnect message for telnet/cleartcp connections
usrCTCPEncryptionTable	1.3.6.1.4.1.429.4.18.12		not-accessible	The table of cleartcp encryption ids and keys.
usrCTCPEncryptionEntry	1.3.6.1.4.1.429.4.18.12.1		not-accessible	A (conceptual) entry for one encryption id and key.
STR usrCTCPEncryptionId	1.3.6.1.4.1.429.4.18.12.1.1	DisplayString	not-accessible	The logical identifier of the encryption id-key Table.
I32 usrCTCPEncryptionKey	1.3.6.1.4.1.429.4.18.12.1.2	Integer32	read-write	Key number corresponds to the encryption-id in the table
ROW usrCTCPEncryptionStatus	1.3.6.1.4.1.429.4.18.12.1.3	RowStatus	read-write	The status of this row of the CTCP Encryption Table.
OCT usrTermProtTelnetBannerFile	1.3.6.1.4.1.429.4.18.13	OCTET STRING	read-write	Banner text displayed to admin users telneting to the system

RFC description

Terminal protocols configuration including Telnet and serial connection settings for CommWorks devices.

Start monitoring CommWorks (3Com/U.S. Robotics) remote-access platforms (Telnet/rlogin terminal access config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TERM-PROT-MIB

What Is TERM-PROT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description