All MIBs › TERM-PROT-MIB › usrTermProtTelnetClientAccess
usrTermProtTelnetClientAccess
Module: TERM-PROT-MIB
OID (symbolic): TERM-PROT-MIB::usrTermProtTelnetClientAccess
OID (numeric): 1.3.6.1.4.1.429.4.18.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates whether to use the client access table. By default, this value will be disabled. If set to enabled, the users can telnet into the HARC only from ip addresses added in the client access table. If the value if set to disabled, the client access table is not referred to.
What is usrTermProtTelnetClientAccess?
This read-write flag determines whether telnet access to the device is restricted to the source IP addresses listed in the usrTelnetAccessTable, defaulting to disabled(2) so the table is ignored. Admins enable it to lock down administrative telnet access to a specific allow-list of management-station IP addresses. For example, setting usrTermProtTelnetClientAccess to enabled(1) means only IP addresses already entered in the client access table will be permitted to telnet into the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.4.18.7 snmpwalk -v2c -c public <target> TERM-PROT-MIB::usrTermProtTelnetClientAccess
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.4.18.7.1 snmpget -v2c -c public <target> TERM-PROT-MIB::usrTermProtTelnetClientAccess.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.4.18.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> usrTermProtTelnetClientAccess.1
Start monitoring CommWorks (3Com/U.S. Robotics) remote-access platforms (Telnet/rlogin terminal access config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TERM-PROT-MIB::usrTermProtTelnetClientAccess OID value, configure state conditions and alerts, and monitor any CommWorks (3Com/U.S. Robotics) remote-access platforms (Telnet/rlogin terminal access config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | ANIC-MIB |
| 1.3.6.1.4.1.429.4 | common | HDR2-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.4.18 | usrTermProt | TERM-PROT-MIB |
| 1.3.6.1.4.1.429.4.18.7 | usrTermProtTelnetClientAccess | TERM-PROT-MIB |