TELDAT-TRAP-NSLA-MIB

All MIBs › TELDAT-TRAP-NSLA-MIB

Organization: Teldat, S.A.

Last Updated: 2014-01-20

Category: Teldat Router Management, Teldat Trap Notifications

Description: Defines Teldat router NSLA (network SLA) event trap notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-TRAP-NSLA-MIB?

The TELDAT-TRAP-NSLA-MIB is a vendor-specific SNMP notification module for Teldat's NSLA (Network Service-Level Agreement / Network SLA) subsystem, which actively probes network performance and raises alarms against configured thresholds. It exposes filter IDs, alarm IDs, advisor IDs, and free-text event/output detail tied to SLA measurement events rather than the raw measurement data itself. Its monitoring purpose is squarely about software-level SLA compliance — flagging when a configured performance filter or alarm threshold has been triggered, functioning as an automated early-warning system for network performance degradation as observed from the router. It is Teldat's own SLA framework and does not appear tied to the IETF DISMAN-PING-MIB or a similar standard, though conceptually related. It is deployed on Teldat routers configured with NSLA probes/filters/alarms to continuously validate WAN or service performance against SLA targets. Engineers can download the TELDAT-TRAP-NSLA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-TRAP-NSLA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat router (Network SLA monitoring feature)

Monitoring Examples

A trap carrying nsla4_alarm_id and nsla4_event_detail tells an operator exactly which configured SLA alarm fired and why, while nsla2_filter_id and nsla2_event_detail identify which measurement filter generated the event. nsla5_advisor_id with nsla5_event_detail points to the 'advisor' rule that triggered, useful for tracing a chain of SLA threshold breaches back to the specific NSLA configuration object responsible.

What Can Be Monitored

triggered SLA alarm ID
triggered filter ID
advisor rule ID
SLA event detail text
output detail text

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TELDAT-MIB

telEventTraps

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
nslaTrapsMIB	1.3.6.1.4.1.2007.1.4.173			This Module Information Base file is defined for managing received SNMP notifications generated by the NSLA event subsystem.
nslaEventsGroup	1.3.6.1.4.1.2007.1.4.173.1
nslaEventObjects1	1.3.6.1.4.1.2007.1.4.173.1.1			Event NSLA.1 Event at global level. \par The 'eventDetail' arg will take one of the following values: \par - ioctl failed rsn = out of tasker \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE
STR nsla1EventDetail	1.3.6.1.4.1.2007.1.4.173.1.1.1	DisplayString	accessible-for-notify	Parameter 'eventDetail' in event NSLA.1
nslaEventObjects2	1.3.6.1.4.1.2007.1.4.173.1.2			Event NSLA.2 Event at filter level. \par The 'eventDetail' arg will take one of the following values: \par - creation failed rsn = NSLA disabled \par - creation failed rsn = ID duplicated \par - creation bypassed rsn = disabled \par - creation failed rsn = memory exhaustion \par - creation failed rsn = unknown filter type \par - creation failed rsn = unknown NSM parameter \par - creation failed rsn = NSM registration failed \par - creation ok \par - client ( ) mutated to zombie \par - removal phase ok \par - removal ok \par - client ( ) registration failed rsn = NULL upcall \par - client ( ) registration failed rsn = memory exhaustion \par - client ( ) registration ok \par - client ( ) zombie reanimation ok \par - client ( ) deregistration failed rsn = NULL upcall \par - client ( ) deregistration ok \par - client ( ) deregistration failed rsn = no matching client found \par - ioctl failed rsn = out of tasker \par - ioctl failed rsn = not active ID \par - ioctl ACT failed rsn = already ACT \par - ioctl ACTIVATE \par - ioctl DEACT failed rsn = already DEACT \par - ioctl DEACTIVATE \par - ioctl REST failed rsn = neither ACT nor DEACT \par - ioctl RESTORE \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE \par - ioctl UNKNOWN \par - client notification bypassed \par - client notification \par - client ( ) notification overwritten \par - act cond detected \par - act cond removed \par - deact cond detected \par - deact cond removed \par - act/deact overlap detected \par - act cond detected \par - act cond removed
I32 nsla2FilterId	1.3.6.1.4.1.2007.1.4.173.1.2.1	Integer32	accessible-for-notify	Parameter 'filterId' in event NSLA.2
STR nsla2EventDetail	1.3.6.1.4.1.2007.1.4.173.1.2.2	DisplayString	accessible-for-notify	Parameter 'eventDetail' in event NSLA.2
nslaEventObjects3	1.3.6.1.4.1.2007.1.4.173.1.3			Event NSLA.3 Sample reported to filter. \par The 'eventDetail' arg will take one of the following values: \par - sample = \par - sample = -> ACTIVE \par - sample = -> DEACTIVE \par - sample = timeout \par - sample = timeout -> ACTIVE
I32 nsla3FilterId	1.3.6.1.4.1.2007.1.4.173.1.3.1	Integer32	accessible-for-notify	Parameter 'filterId' in event NSLA.3
STR nsla3EventDetail	1.3.6.1.4.1.2007.1.4.173.1.3.2	DisplayString	accessible-for-notify	Parameter 'eventDetail' in event NSLA.3
nslaEventObjects4	1.3.6.1.4.1.2007.1.4.173.1.4			Event NSLA.4 Event at alarm level. \par The 'eventDetail' arg will take one of the following values: \par - creation failed rsn = NSLA disabled \par - creation failed rsn = ID duplicated \par - creation bypassed rsn = disabled \par - creation failed rsn = memory exhaustion \par - creation failed rsn = registration in filter failed \par - registration in filter ok \par - creation ok \par - client ( ) mutated to zombie \par - removal successful \par - client ( ) registration failed rsn = NULL upcall \par - client ( ) registration failed rsn = memory exhaustion \par - client ( ) registration ok \par - client ( ) zombie reanimation ok \par - client ( ) deregistration failed rsn = NULL upcall \par - client ( ) deregistration ok \par - client ( ) deregistration failed rsn = no matching client found \par - ioctl failed rsn = out of tasker \par - ioctl failed rsn = not active ID \par - ioctl ACT failed rsn = already ACT \par - ioctl ACTIVATE \par - ioctl DEACT failed rsn = already DEACT \par - ioctl DEACTIVATE \par - ioctl REST failed rsn = neither ACT nor DEACT \par - ioctl RESTORE \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE \par - ioctl MNEMONICAL EXP \par - ioctl ioctl NUMERICAL EXP \par - ioctl UNKNOWN \par - notification from filter : \par - filter map change (0x%04x --> 0x%04x) \par - client notification bypassed \par - client notification \par - client ( ) notification overwritten
I32 nsla4AlarmId	1.3.6.1.4.1.2007.1.4.173.1.4.1	Integer32	accessible-for-notify	Parameter 'alarmId' in event NSLA.4
STR nsla4EventDetail	1.3.6.1.4.1.2007.1.4.173.1.4.2	DisplayString	accessible-for-notify	Parameter 'eventDetail' in event NSLA.4
nslaEventObjects5	1.3.6.1.4.1.2007.1.4.173.1.5			Event NSLA.5 Event at advisor level. \par The 'eventDetail' arg will take one of the following values: \par - creation failed rsn = NSLA disabled \par - creation failed rsn = ID duplicated \par - creation bypassed rsn = disabled \par - creation failed rsn = memory exhaustion \par - creation failed rsn = registration in alarm failed \par - registration in alarm ok \par - creation ok \par - client ( ) mutated to zombie \par - removal successful \par - client ( ) registration failed rsn = NULL upcall \par - client ( ) registration failed rsn = memory exhaustion \par - client ( ) registration ok \par - client ( ) zombie reanimation ok \par - client ( ) deregistration failed rsn = NULL upcall \par - client ( ) deregistration ok \par - client ( ) deregistration failed rsn = no matching client found \par - ioctl failed rsn = out of tasker \par - ioctl failed rsn = not active ID \par - ioctl ACT failed rsn = already ACT \par - ioctl ACTIVATE \par - ioctl DEACT failed rsn = already DEACT \par - ioctl DEACTIVATE \par - ioctl REST failed rsn = neither ACT nor DEACT \par - ioctl RESTORE \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE \par - ioctl MNEMONICAL EXP \par - ioctl ioctl NUMERICAL EXP \par - ioctl UNKNOWN \par - notification from alarm : \par - alarm map change (0x%04x --> 0x%04x) \par - client notification bypassed \par - client notification \par - client ( ) notification overwritten
I32 nsla5AdvisorId	1.3.6.1.4.1.2007.1.4.173.1.5.1	Integer32	accessible-for-notify	Parameter 'advisorId' in event NSLA.5
STR nsla5EventDetail	1.3.6.1.4.1.2007.1.4.173.1.5.2	DisplayString	accessible-for-notify	Parameter 'eventDetail' in event NSLA.5
nslaEventObjects6	1.3.6.1.4.1.2007.1.4.173.1.6			Event NSLA.6 Filter output change. \par The 'outputDetail' arg will take one of the following values: \par - output TRUE \par - output FALSE
I32 nsla6FilterId	1.3.6.1.4.1.2007.1.4.173.1.6.1	Integer32	accessible-for-notify	Parameter 'filterId' in event NSLA.6
STR nsla6OutputDetail	1.3.6.1.4.1.2007.1.4.173.1.6.2	DisplayString	accessible-for-notify	Parameter 'outputDetail' in event NSLA.6
nslaEventObjects7	1.3.6.1.4.1.2007.1.4.173.1.7			Event NSLA.7 Alarm output change. \par The 'outputDetail' arg will take one of the following values: \par - output TRUE \par - output FALSE
I32 nsla7AlarmId	1.3.6.1.4.1.2007.1.4.173.1.7.1	Integer32	accessible-for-notify	Parameter 'alarmId' in event NSLA.7
STR nsla7OutputDetail	1.3.6.1.4.1.2007.1.4.173.1.7.2	DisplayString	accessible-for-notify	Parameter 'outputDetail' in event NSLA.7
nslaEventObjects8	1.3.6.1.4.1.2007.1.4.173.1.8			Event NSLA.8 Advisor output change. \par The 'outputDetail' arg will take one of the following values: \par - output TRUE \par - output FALSE
I32 nsla8AdvisorId	1.3.6.1.4.1.2007.1.4.173.1.8.1	Integer32	accessible-for-notify	Parameter 'advisorId' in event NSLA.8
STR nsla8OutputDetail	1.3.6.1.4.1.2007.1.4.173.1.8.2	DisplayString	accessible-for-notify	Parameter 'outputDetail' in event NSLA.8
nslaNotifications	1.3.6.1.4.1.2007.1.4.173.2
nslaNotificationsPrefix	1.3.6.1.4.1.2007.1.4.173.2.0
NTF nslaNotification1	1.3.6.1.4.1.2007.1.4.173.2.0.1			Notification of Event NSLA.1 Message: 'global $1' Parameters list: $1: nsla1EventDetail Event at global level. \par The 'eventDetail' arg will take one of the following values: \par - ioctl failed rsn = out of tasker \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE
NTF nslaNotification2	1.3.6.1.4.1.2007.1.4.173.2.0.2			Notification of Event NSLA.2 Message: 'filter/$1 $2' Parameters list: $1: nsla2FilterId $2: nsla2EventDetail Event at filter level. \par The 'eventDetail' arg will take one of the following values: \par - creation failed rsn = NSLA disabled \par - creation failed rsn = ID duplicated \par - creation bypassed rsn = disabled \par - creation failed rsn = memory exhaustion \par - creation failed rsn = unknown filter type \par - creation failed rsn = unknown NSM parameter \par - creation failed rsn = NSM registration failed \par - creation ok \par - client ( ) mutated to zombie \par - removal phase ok \par - removal ok \par - client ( ) registration failed rsn = NULL upcall \par - client ( ) registration failed rsn = memory exhaustion \par - client ( ) registration ok \par - client ( ) zombie reanimation ok \par - client ( ) deregistration failed rsn = NULL upcall \par - client ( ) deregistration ok \par - client ( ) deregistration failed rsn = no matching client found \par - ioctl failed rsn = out of tasker \par - ioctl failed rsn = not active ID \par - ioctl ACT failed rsn = already ACT \par - ioctl ACTIVATE \par - ioctl DEACT failed rsn = already DEACT \par - ioctl DEACTIVATE \par - ioctl REST failed rsn = neither ACT nor DEACT \par - ioctl RESTORE \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE \par - ioctl UNKNOWN \par - client notification bypassed \par - client notification \par - client ( ) notification overwritten \par - act cond detected \par - act cond removed \par - deact cond detected \par - deact cond removed \par - act/deact overlap detected \par - act cond detected \par - act cond removed
NTF nslaNotification3	1.3.6.1.4.1.2007.1.4.173.2.0.3			Notification of Event NSLA.3 Message: 'filter/$1 $2' Parameters list: $1: nsla3FilterId $2: nsla3EventDetail Sample reported to filter. \par The 'eventDetail' arg will take one of the following values: \par - sample = \par - sample = -> ACTIVE \par - sample = -> DEACTIVE \par - sample = timeout \par - sample = timeout -> ACTIVE
NTF nslaNotification4	1.3.6.1.4.1.2007.1.4.173.2.0.4			Notification of Event NSLA.4 Message: 'alarm/$1 $2' Parameters list: $1: nsla4AlarmId $2: nsla4EventDetail Event at alarm level. \par The 'eventDetail' arg will take one of the following values: \par - creation failed rsn = NSLA disabled \par - creation failed rsn = ID duplicated \par - creation bypassed rsn = disabled \par - creation failed rsn = memory exhaustion \par - creation failed rsn = registration in filter failed \par - registration in filter ok \par - creation ok \par - client ( ) mutated to zombie \par - removal successful \par - client ( ) registration failed rsn = NULL upcall \par - client ( ) registration failed rsn = memory exhaustion \par - client ( ) registration ok \par - client ( ) zombie reanimation ok \par - client ( ) deregistration failed rsn = NULL upcall \par - client ( ) deregistration ok \par - client ( ) deregistration failed rsn = no matching client found \par - ioctl failed rsn = out of tasker \par - ioctl failed rsn = not active ID \par - ioctl ACT failed rsn = already ACT \par - ioctl ACTIVATE \par - ioctl DEACT failed rsn = already DEACT \par - ioctl DEACTIVATE \par - ioctl REST failed rsn = neither ACT nor DEACT \par - ioctl RESTORE \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE \par - ioctl MNEMONICAL EXP \par - ioctl ioctl NUMERICAL EXP \par - ioctl UNKNOWN \par - notification from filter : \par - filter map change (0x%04x --> 0x%04x) \par - client notification bypassed \par - client notification \par - client ( ) notification overwritten
NTF nslaNotification5	1.3.6.1.4.1.2007.1.4.173.2.0.5			Notification of Event NSLA.5 Message: 'advisor/$1 $2' Parameters list: $1: nsla5AdvisorId $2: nsla5EventDetail Event at advisor level. \par The 'eventDetail' arg will take one of the following values: \par - creation failed rsn = NSLA disabled \par - creation failed rsn = ID duplicated \par - creation bypassed rsn = disabled \par - creation failed rsn = memory exhaustion \par - creation failed rsn = registration in alarm failed \par - registration in alarm ok \par - creation ok \par - client ( ) mutated to zombie \par - removal successful \par - client ( ) registration failed rsn = NULL upcall \par - client ( ) registration failed rsn = memory exhaustion \par - client ( ) registration ok \par - client ( ) zombie reanimation ok \par - client ( ) deregistration failed rsn = NULL upcall \par - client ( ) deregistration ok \par - client ( ) deregistration failed rsn = no matching client found \par - ioctl failed rsn = out of tasker \par - ioctl failed rsn = not active ID \par - ioctl ACT failed rsn = already ACT \par - ioctl ACTIVATE \par - ioctl DEACT failed rsn = already DEACT \par - ioctl DEACTIVATE \par - ioctl REST failed rsn = neither ACT nor DEACT \par - ioctl RESTORE \par - ioctl MUTE failed rsn = already MUTED \par - ioctl MUTE \par - ioctl UNMUTE failed rsn = not MUTED \par - ioctl UNMUTE \par - ioctl DISABLE failed rsn = already DISABLED \par - ioctl DISABLE \par - ioctl ENABLE failed rsn = already ENABLED \par - ioctl ENABLE \par - ioctl MNEMONICAL EXP \par - ioctl ioctl NUMERICAL EXP \par - ioctl UNKNOWN \par - notification from alarm : \par - alarm map change (0x%04x --> 0x%04x) \par - client notification bypassed \par - client notification \par - client ( ) notification overwritten
NTF nslaNotification6	1.3.6.1.4.1.2007.1.4.173.2.0.6			Notification of Event NSLA.6 Message: 'filter/$1 $2' Parameters list: $1: nsla6FilterId $2: nsla6OutputDetail Filter output change. \par The 'outputDetail' arg will take one of the following values: \par - output TRUE \par - output FALSE
NTF nslaNotification7	1.3.6.1.4.1.2007.1.4.173.2.0.7			Notification of Event NSLA.7 Message: 'alarm/$1 $2' Parameters list: $1: nsla7AlarmId $2: nsla7OutputDetail Alarm output change. \par The 'outputDetail' arg will take one of the following values: \par - output TRUE \par - output FALSE
NTF nslaNotification8	1.3.6.1.4.1.2007.1.4.173.2.0.8			Notification of Event NSLA.8 Message: 'advisor/$1 $2' Parameters list: $1: nsla8AdvisorId $2: nsla8OutputDetail Advisor output change. \par The 'outputDetail' arg will take one of the following values: \par - output TRUE \par - output FALSE

RFC description

Defines SNMP notifications generated by Teldat NSLA event subsystem for network service level monitoring.

Start monitoring Teldat router, Network SLA monitoring feature (SLA threshold/alarm event traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-TRAP-NSLA-MIB

What Is TELDAT-TRAP-NSLA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description