TELDAT-TRAP-G104-MIB

All MIBs › TELDAT-TRAP-G104-MIB

Organization: Teldat, S.A.

Last Updated: 2014-01-20

Category: SCADA and Industrial Protocols, Teldat Router Management, Teldat Trap Notifications

Description: Defines Teldat router G104 (IEC-104 SCADA protocol) event trap notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-TRAP-G104-MIB?

The TELDAT-TRAP-G104-MIB is a vendor-specific SNMP notification module for Teldat routers, defining traps generated by the router's IEC 60870-5-104 (G104) SCADA protocol subsystem. Rather than exposing polled configuration or performance tables, it is built entirely around event/fault objects — message type, byte counts, and remote-host/port identifiers carried as varbinds in traps raised when the G104 protocol handler detects noteworthy events. Its role in monitoring is squarely fault-oriented: it lets a SCADA operations team detect abnormal IEC-104 sessions (unexpected foreign hosts, port changes, or protocol events) in near-real time, a software/protocol-status signal on the router rather than a physical hardware metric. It sits within Teldat's broader enterprise MIB tree and depends on the router's underlying IEC-104/G104 protocol implementation for the events it reports. It is deployed on Teldat routers acting as SCADA/RTU gateways in electrical utility or industrial control environments where IEC 60870-5-104 traffic is relayed, and a TELDAT-TRAP-G104-MIB download is available for SCADA operations teams who need to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-TRAP-G104-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat router (SCADA / IEC 60870-5-104 gateway)

Monitoring Examples

An operator would subscribe to g104Notifications and inspect varbinds such as g1041-foreign-host and g1041-remote-port together with g1041-message-type and g1041-bytes to see which remote IEC-104 master/slave initiated a session and how much data was exchanged. A trap carrying g1044-remote-ip and g1044-remote-port with an unexpected address would flag an unauthorized or misconfigured SCADA connection attempt. The numbered object families (g1041 through g1046) correspond to distinct G104 event types, each surfacing host/port/control-center address detail such as g1045-cc-address and g1046-cc-address relevant to that event.

What Can Be Monitored

IEC-104 message type
bytes transferred
foreign host address
remote port number
remote IP address
control center address

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TELDAT-MIB

telEventTraps

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
g104TrapsMIB	1.3.6.1.4.1.2007.1.4.228			This Module Information Base file is defined for managing received SNMP notifications generated by the G104 event subsystem.
g104EventsGroup	1.3.6.1.4.1.2007.1.4.228.1
g104EventObjects1	1.3.6.1.4.1.2007.1.4.228.1.1			Event G104.1 A TCP Packet has been received.
STR g1041_message_type	1.3.6.1.4.1.2007.1.4.228.1.1.1	DisplayString	accessible-for-notify	Parameter 'message-type' in event G104.1
I32 g1041_bytes	1.3.6.1.4.1.2007.1.4.228.1.1.2	Integer32	accessible-for-notify	Parameter 'bytes' in event G104.1
IP g1041_foreign_host	1.3.6.1.4.1.2007.1.4.228.1.1.3	IpAddress	accessible-for-notify	Parameter 'foreign-host' in event G104.1
I32 g1041_remote_port	1.3.6.1.4.1.2007.1.4.228.1.1.4	Integer32	accessible-for-notify	Parameter 'remote-port' in event G104.1
g104EventObjects2	1.3.6.1.4.1.2007.1.4.228.1.2			Event G104.2 The TCP session has been closed.
IP g1042_foreign_host	1.3.6.1.4.1.2007.1.4.228.1.2.1	IpAddress	accessible-for-notify	Parameter 'foreign-host' in event G104.2
I32 g1042_remote_port	1.3.6.1.4.1.2007.1.4.228.1.2.2	Integer32	accessible-for-notify	Parameter 'remote-port' in event G104.2
g104EventObjects3	1.3.6.1.4.1.2007.1.4.228.1.3			Event G104.3 The TCP session has been closed by the Remote end.
IP g1043_foreign_host	1.3.6.1.4.1.2007.1.4.228.1.3.1	IpAddress	accessible-for-notify	Parameter 'foreign-host' in event G104.3
I32 g1043_remote_port	1.3.6.1.4.1.2007.1.4.228.1.3.2	Integer32	accessible-for-notify	Parameter 'remote-port' in event G104.3
g104EventObjects4	1.3.6.1.4.1.2007.1.4.228.1.4			Event G104.4 The TCP session has been opened by the Remote end.
IP g1044_remote_ip	1.3.6.1.4.1.2007.1.4.228.1.4.1	IpAddress	accessible-for-notify	Parameter 'remote-ip' in event G104.4
I32 g1044_remote_port	1.3.6.1.4.1.2007.1.4.228.1.4.2	Integer32	accessible-for-notify	Parameter 'remote-port' in event G104.4
g104EventObjects5	1.3.6.1.4.1.2007.1.4.228.1.5			Event G104.5 A packet was lost, due TCP Tx overrun error.
IP g1045_cc_address	1.3.6.1.4.1.2007.1.4.228.1.5.1	IpAddress	accessible-for-notify	Parameter 'cc-address' in event G104.5
g104EventObjects6	1.3.6.1.4.1.2007.1.4.228.1.6			Event G104.6 A packet was lost, due TCP is closed.
IP g1046_cc_address	1.3.6.1.4.1.2007.1.4.228.1.6.1	IpAddress	accessible-for-notify	Parameter 'cc-address' in event G104.6
g104EventObjects7	1.3.6.1.4.1.2007.1.4.228.1.7			Event G104.7 TCP generic event was occurred.
STR g1047_event	1.3.6.1.4.1.2007.1.4.228.1.7.1	DisplayString	accessible-for-notify	Parameter 'event' in event G104.7
IP g1047_ip	1.3.6.1.4.1.2007.1.4.228.1.7.2	IpAddress	accessible-for-notify	Parameter 'ip' in event G104.7
I32 g1047_port	1.3.6.1.4.1.2007.1.4.228.1.7.3	Integer32	accessible-for-notify	Parameter 'port' in event G104.7
g104EventObjects8	1.3.6.1.4.1.2007.1.4.228.1.8			Event G104.8 An input TCP session has been rejet.
STR g1048_event	1.3.6.1.4.1.2007.1.4.228.1.8.1	DisplayString	accessible-for-notify	Parameter 'event' in event G104.8
IP g1048_ip	1.3.6.1.4.1.2007.1.4.228.1.8.2	IpAddress	accessible-for-notify	Parameter 'ip' in event G104.8
I32 g1048_port	1.3.6.1.4.1.2007.1.4.228.1.8.3	Integer32	accessible-for-notify	Parameter 'port' in event G104.8
g104EventObjects9	1.3.6.1.4.1.2007.1.4.228.1.9			Event G104.9 Trying to send TCP an I frame to Control Center.
I32 g1049_ns	1.3.6.1.4.1.2007.1.4.228.1.9.1	Integer32	accessible-for-notify	Parameter 'ns' in event G104.9
I32 g1049_nr	1.3.6.1.4.1.2007.1.4.228.1.9.2	Integer32	accessible-for-notify	Parameter 'nr' in event G104.9
IP g1049_cc_address	1.3.6.1.4.1.2007.1.4.228.1.9.3	IpAddress	accessible-for-notify	Parameter 'cc-address' in event G104.9
I32 g1049_bytes	1.3.6.1.4.1.2007.1.4.228.1.9.4	Integer32	accessible-for-notify	Parameter 'bytes' in event G104.9
g104EventObjects10	1.3.6.1.4.1.2007.1.4.228.1.10			Event G104.10 Detailed Data send to TCP session.
IP g10410_ip_address	1.3.6.1.4.1.2007.1.4.228.1.10.1	IpAddress	accessible-for-notify	Parameter 'ip-address' in event G104.10
I32 g10410_lenght	1.3.6.1.4.1.2007.1.4.228.1.10.2	Integer32	accessible-for-notify	Parameter 'lenght' in event G104.10
STR g10410_hex_data	1.3.6.1.4.1.2007.1.4.228.1.10.3	DisplayString	accessible-for-notify	Parameter 'hex-data' in event G104.10
g104EventObjects11	1.3.6.1.4.1.2007.1.4.228.1.11			Event G104.11 Detailed Data received from TCP session.
IP g10411_ip_address	1.3.6.1.4.1.2007.1.4.228.1.11.1	IpAddress	accessible-for-notify	Parameter 'ip-address' in event G104.11
I32 g10411_lenght	1.3.6.1.4.1.2007.1.4.228.1.11.2	Integer32	accessible-for-notify	Parameter 'lenght' in event G104.11
STR g10411_hex_data	1.3.6.1.4.1.2007.1.4.228.1.11.3	DisplayString	accessible-for-notify	Parameter 'hex-data' in event G104.11
g104EventObjects12	1.3.6.1.4.1.2007.1.4.228.1.12			Event G104.12 Agent IEC-104 protocol START on specified channel.
STR g10412_agent	1.3.6.1.4.1.2007.1.4.228.1.12.1	DisplayString	accessible-for-notify	Parameter 'agent' in event G104.12
I32 g10412_channel	1.3.6.1.4.1.2007.1.4.228.1.12.2	Integer32	accessible-for-notify	Parameter 'channel' in event G104.12
g104EventObjects13	1.3.6.1.4.1.2007.1.4.228.1.13			Event G104.13 Agent IEC-104 protocol STOPPED on specified channel.
STR g10413_agent	1.3.6.1.4.1.2007.1.4.228.1.13.1	DisplayString	accessible-for-notify	Parameter 'agent' in event G104.13
I32 g10413_channel	1.3.6.1.4.1.2007.1.4.228.1.13.2	Integer32	accessible-for-notify	Parameter 'channel' in event G104.13
g104EventObjects14	1.3.6.1.4.1.2007.1.4.228.1.14			Event G104.14 Agent IEC-104 start running.
STR g10414_agent	1.3.6.1.4.1.2007.1.4.228.1.14.1	DisplayString	accessible-for-notify	Parameter 'agent' in event G104.14
g104EventObjects15	1.3.6.1.4.1.2007.1.4.228.1.15			Event G104.15 Agent IEC-104 stop.
STR g10415_agent	1.3.6.1.4.1.2007.1.4.228.1.15.1	DisplayString	accessible-for-notify	Parameter 'agent' in event G104.15
g104EventObjects16	1.3.6.1.4.1.2007.1.4.228.1.16			Event G104.16 An I frame has been received from TCP.
I32 g10416_ns	1.3.6.1.4.1.2007.1.4.228.1.16.1	Integer32	accessible-for-notify	Parameter 'ns' in event G104.16
I32 g10416_nr	1.3.6.1.4.1.2007.1.4.228.1.16.2	Integer32	accessible-for-notify	Parameter 'nr' in event G104.16
I32 g10416_bytes	1.3.6.1.4.1.2007.1.4.228.1.16.3	Integer32	accessible-for-notify	Parameter 'bytes' in event G104.16
IP g10416_foreign_host	1.3.6.1.4.1.2007.1.4.228.1.16.4	IpAddress	accessible-for-notify	Parameter 'foreign-host' in event G104.16
I32 g10416_remote_port	1.3.6.1.4.1.2007.1.4.228.1.16.5	Integer32	accessible-for-notify	Parameter 'remote-port' in event G104.16
g104EventObjects17	1.3.6.1.4.1.2007.1.4.228.1.17			Event G104.17 An I frame has been received from TCP.
I32 g10417_nr	1.3.6.1.4.1.2007.1.4.228.1.17.1	Integer32	accessible-for-notify	Parameter 'nr' in event G104.17
I32 g10417_bytes	1.3.6.1.4.1.2007.1.4.228.1.17.2	Integer32	accessible-for-notify	Parameter 'bytes' in event G104.17
IP g10417_foreign_host	1.3.6.1.4.1.2007.1.4.228.1.17.3	IpAddress	accessible-for-notify	Parameter 'foreign-host' in event G104.17
I32 g10417_remote_port	1.3.6.1.4.1.2007.1.4.228.1.17.4	Integer32	accessible-for-notify	Parameter 'remote-port' in event G104.17
g104EventObjects18	1.3.6.1.4.1.2007.1.4.228.1.18			Event G104.18 Trying to send TCP a S frame to Control Center.
I32 g10418_nr	1.3.6.1.4.1.2007.1.4.228.1.18.1	Integer32	accessible-for-notify	Parameter 'nr' in event G104.18
IP g10418_cc_address	1.3.6.1.4.1.2007.1.4.228.1.18.2	IpAddress	accessible-for-notify	Parameter 'cc-address' in event G104.18
I32 g10418_bytes	1.3.6.1.4.1.2007.1.4.228.1.18.3	Integer32	accessible-for-notify	Parameter 'bytes' in event G104.18
g104EventObjects19	1.3.6.1.4.1.2007.1.4.228.1.19			Event G104.19 Trying to send TCP an U frame to Control Center.
IP g10419_cc_address	1.3.6.1.4.1.2007.1.4.228.1.19.1	IpAddress	accessible-for-notify	Parameter 'cc-address' in event G104.19
I32 g10419_bytes	1.3.6.1.4.1.2007.1.4.228.1.19.2	Integer32	accessible-for-notify	Parameter 'bytes' in event G104.19
g104EventObjects20	1.3.6.1.4.1.2007.1.4.228.1.20			Event G104.20 The TCP session has been closed by the Local end.
STR g10420_cause	1.3.6.1.4.1.2007.1.4.228.1.20.1	DisplayString	accessible-for-notify	Parameter 'cause' in event G104.20
IP g10420_foreign_host	1.3.6.1.4.1.2007.1.4.228.1.20.2	IpAddress	accessible-for-notify	Parameter 'foreign-host' in event G104.20
I32 g10420_remote_port	1.3.6.1.4.1.2007.1.4.228.1.20.3	Integer32	accessible-for-notify	Parameter 'remote-port' in event G104.20
g104Notifications	1.3.6.1.4.1.2007.1.4.228.2
g104NotificationsPrefix	1.3.6.1.4.1.2007.1.4.228.2.0
NTF g104Notification1	1.3.6.1.4.1.2007.1.4.228.2.0.1			Notification of Event G104.1 Message: 'A TCP packet $1 has been received, $2 bytes. rem. IP: $3, Port: $4' Parameters list: $1: g1041-message-type $2: g1041-bytes $3: g1041-foreign-host $4: g1041-remote-port A TCP Packet has been received.
NTF g104Notification2	1.3.6.1.4.1.2007.1.4.228.2.0.2			Notification of Event G104.2 Message: 'The TCP session has been closed. rem. IP: $1, Port: $2' Parameters list: $1: g1042-foreign-host $2: g1042-remote-port The TCP session has been closed.
NTF g104Notification3	1.3.6.1.4.1.2007.1.4.228.2.0.3			Notification of Event G104.3 Message: 'The TCP session has been closed by the Remote end. rem. IP: $1, Port: $2' Parameters list: $1: g1043-foreign-host $2: g1043-remote-port The TCP session has been closed by the Remote end.
NTF g104Notification4	1.3.6.1.4.1.2007.1.4.228.2.0.4			Notification of Event G104.4 Message: 'The TCP session has been opened by the Remote end. Remote IP:$1 , Port: $2' Parameters list: $1: g1044-remote-ip $2: g1044-remote-port The TCP session has been opened by the Remote end.
NTF g104Notification5	1.3.6.1.4.1.2007.1.4.228.2.0.5			Notification of Event G104.5 Message: 'Packet lost due TCP Tx overrun error. C.C. address $1' Parameters list: $1: g1045-cc-address A packet was lost, due TCP Tx overrun error.
NTF g104Notification6	1.3.6.1.4.1.2007.1.4.228.2.0.6			Notification of Event G104.6 Message: 'Packet lost due TCP session is closes. C.C IP address $1' Parameters list: $1: g1046-cc-address A packet was lost, due TCP is closed.
NTF g104Notification7	1.3.6.1.4.1.2007.1.4.228.2.0.7			Notification of Event G104.7 Message: 'The TCP event: $1 . Rem. IP: $2, rem. Port: $3' Parameters list: $1: g1047-event $2: g1047-ip $3: g1047-port TCP generic event was occurred.
NTF g104Notification8	1.3.6.1.4.1.2007.1.4.228.2.0.8			Notification of Event G104.8 Message: 'TCP inout session rejet: $1 . Rem. IP: $2, rem. Port: $3' Parameters list: $1: g1048-event $2: g1048-ip $3: g1048-port An input TCP session has been rejet.
NTF g104Notification9	1.3.6.1.4.1.2007.1.4.228.2.0.9			Notification of Event G104.9 Message: 'Trying to send TCP an I frame(Ns:$1/Nr:$2) to Control Center $3, $4 bytes' Parameters list: $1: g1049-ns $2: g1049-nr $3: g1049-cc-address $4: g1049-bytes Trying to send TCP an I frame to Control Center.
NTF g104Notification10	1.3.6.1.4.1.2007.1.4.228.2.0.10			Notification of Event G104.10 Message: 'Data transmitted to TCP session(addr:$1,$2 bytes):$3' Parameters list: $1: g10410-ip-address $2: g10410-lenght $3: g10410-hex-data Detailed Data send to TCP session.
NTF g104Notification11	1.3.6.1.4.1.2007.1.4.228.2.0.11			Notification of Event G104.11 Message: 'Data recived from TCP session(addr:$1,$2 bytes):$3' Parameters list: $1: g10411-ip-address $2: g10411-lenght $3: g10411-hex-data Detailed Data received from TCP session.
NTF g104Notification12	1.3.6.1.4.1.2007.1.4.228.2.0.12			Notification of Event G104.12 Message: 'Agent IEC-104 $1 START on channel $2' Parameters list: $1: g10412-agent $2: g10412-channel Agent IEC-104 protocol START on specified channel.
NTF g104Notification13	1.3.6.1.4.1.2007.1.4.228.2.0.13			Notification of Event G104.13 Message: 'Agent IEC-104 $1 STOPPED on channel $2' Parameters list: $1: g10413-agent $2: g10413-channel Agent IEC-104 protocol STOPPED on specified channel.
NTF g104Notification14	1.3.6.1.4.1.2007.1.4.228.2.0.14			Notification of Event G104.14 Message: 'Agent IEC-104 $1 is running' Parameters list: $1: g10414-agent Agent IEC-104 start running.
NTF g104Notification15	1.3.6.1.4.1.2007.1.4.228.2.0.15			Notification of Event G104.15 Message: 'Agent IEC-104 $1 is not running' Parameters list: $1: g10415-agent Agent IEC-104 stop.
NTF g104Notification16	1.3.6.1.4.1.2007.1.4.228.2.0.16			Notification of Event G104.16 Message: 'A TCP packet with I frame(Ns:$1/Nr:$2) has been received, $3 bytes. rem. IP: $4, Port: $5' Parameters list: $1: g10416-ns $2: g10416-nr $3: g10416-bytes $4: g10416-foreign-host $5: g10416-remote-port An I frame has been received from TCP.
NTF g104Notification17	1.3.6.1.4.1.2007.1.4.228.2.0.17			Notification of Event G104.17 Message: 'A TCP packet with I frame(Nr:$1)has been received, $2 bytes. rem. IP: $3, Port: $4' Parameters list: $1: g10417-nr $2: g10417-bytes $3: g10417-foreign-host $4: g10417-remote-port An I frame has been received from TCP.
NTF g104Notification18	1.3.6.1.4.1.2007.1.4.228.2.0.18			Notification of Event G104.18 Message: 'Trying to send TCP a S frame(Nr:$1) to Control Center $2, $3 bytes' Parameters list: $1: g10418-nr $2: g10418-cc-address $3: g10418-bytes Trying to send TCP a S frame to Control Center.
NTF g104Notification19	1.3.6.1.4.1.2007.1.4.228.2.0.19			Notification of Event G104.19 Message: 'Trying to send TCP an U frame to Control Center $1, $2 bytes' Parameters list: $1: g10419-cc-address $2: g10419-bytes Trying to send TCP an U frame to Control Center.
NTF g104Notification20	1.3.6.1.4.1.2007.1.4.228.2.0.20			Notification of Event G104.20 Message: 'The TCP session has been closed by the Local end. cause[$1], rem. IP: $2, Port: $3' Parameters list: $1: g10420-cause $2: g10420-foreign-host $3: g10420-remote-port The TCP session has been closed by the Local end.

RFC description

Teldat vendor-private MIB defining trap/alert notifications specific to G104 series communication equipment.

Start monitoring Teldat router, SCADA/IEC 60870-5-104 gateway (protocol session event traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-TRAP-G104-MIB

What Is TELDAT-TRAP-G104-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description