All MIBs › TELDAT-MON-PROTOCOL-RIP-MIB
Category: Teldat Router Management
Description: Monitors Teldat router RIP routing protocol neighbor adjacencies, route counts, and update message statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TELDAT-MON-PROTOCOL-RIP-MIB?
TELDAT-MON-PROTOCOL-RIP-MIB is Teldat's vendor-specific SNMP module for monitoring the RIP (Routing Information Protocol) routing process on Teldat routers, a Spanish networking vendor's enterprise/carrier router line. It exposes routing-protocol-specific data such as RIP neighbor adjacency state, learned route counts, and RIP update message statistics rather than hardware sensor data. Its monitoring value centers on software/protocol status: confirming RIP neighbors remain up, tracking how many routes are being learned/advertised, and counting protocol update messages to detect routing instability or a stalled RIP process. As a RIP-specific monitoring MIB it implicitly complements the base RIP-2 MIB (RFC 1724) and general routing-table MIBs, extending them with Teldat-specific monitoring detail. It is typically deployed in enterprise or branch-office WAN environments using Teldat routers where RIP is still used for simple dynamic routing and operators want protocol-level health visibility. Engineers can download the TELDAT-MON-PROTOCOL-RIP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-PROTOCOL-RIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Teldat router (enterprise/branch WAN router)
Monitoring Examples
No object or table names were provided in this batch for this MIB, so a scenario cannot be grounded in specific OIDs. Based on the short description, an admin would typically poll RIP neighbor adjacency counters to detect a downed or flapping neighbor, and route/update-message counts to spot routing instability. Exact table and object names are not available to cite here.
What Can Be Monitored
- RIP neighbor adjacency state
- learned route count
- RIP update message statistics
Imported Objects
OIDs
RFC description
Teldat enterprise MIB for monitoring Routing Information Protocol (RIP) configuration and operation including MD5 authentication (vendor-private).
Start monitoring Teldat router, enterprise/branch WAN (RIP neighbor/route-count status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.