All MIBs › T7511-MIB › humiditylowi
humiditylowi
Module: T7511-MIB
OID (symbolic): T7511-MIB::humiditylowi
OID (numeric): 1.3.6.1.4.1.22626.1.2.4.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Humidity Limit Low *10
What is humiditylowi?
A read-write integer (-2000..6000) setting the low-humidity alarm threshold multiplied by 10, the numeric counterpart to humiditylow. Admins set this to configure the trip point that will trigger alarmhumidity if humidity drops too low.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22626.1.2.4.3 snmpwalk -v2c -c public <target> T7511-MIB::humiditylowi
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22626.1.2.4.3.1 snmpget -v2c -c public <target> T7511-MIB::humiditylowi.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22626.1.2.4.3.1 i <value>
Start monitoring Comet T7511 environmental (temperature/humidity/pressure) sensor (reading/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T7511-MIB::humiditylowi OID value, configure state conditions and alerts, and monitor any Comet T7511 environmental (temperature/humidity/pressure) sensor (reading/alarm-threshold status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22626 | comet | COMETMS-MIB |
| 1.3.6.1.4.1.22626.1 | products | COMETMS-MIB |
| 1.3.6.1.4.1.22626.1.2 | h0530 | H0530-MIB |
| 1.3.6.1.4.1.22626.1.2.4 | settingsint | H0530-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22626.1.2.4.3 | humiditylowi | T7511-MIB |