All MIBs › SYMBIOSDMI20MIFDEFINITIONID20-MIB
Category: Legacy and Historical, Storage
Description: Defines Symbios DMI 2.0 component ID 2.0 instrumentation objects for legacy storage controller management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SYMBIOSDMI20MIFDEFINITIONID20-MIB?
This is a legacy MIB translating DMI (Desktop Management Interface) 2.0 MIF component definitions from Symbios Logic, a SCSI/storage controller vendor later folded into LSI/Adaptec, into SNMP objects for storage controller management. It exposes hardware/software inventory data for a component abstraction, manufacturer, product name, version, serial number, installation, and verification status, plus a subcomponent-software table tracking installed software/firmware modules by index. This lets administrators monitor both hardware identity (serial number, product/version) and software status (installed firmware/driver version per subcomponent) of legacy SCSI storage controllers, important for confirming firmware compatibility and asset tracking. Being a DMI-to-SNMP translation, it is explicitly dependent on the DMI 2.0/MIF standard and the SCSI component model it mirrors. It was typically deployed on legacy servers using Symbios/LSI SCSI RAID or host bus adapter controllers managed through DMI-aware system management software. Network engineers evaluating or troubleshooting this functionality can download the SYMBIOSDMI20MIFDEFINITIONID20-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SYMBIOSDMI20MIFDEFINITIONID20-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Symbios/LSI SCSI storage controller
- legacy server with DMI-managed host bus adapter
Monitoring Examples
An administrator reads a1Manufacturer, a1Product, a1Version, and a1SerialNumber to confirm the exact SCSI controller model and firmware/hardware revision installed in a server, and checks a1Verify/a1Installation status to confirm the component passed self-verification after installation. The a2SoftwareIndex under tSubcomponentSoftware/eSubcomponentSoftware would be polled to confirm which firmware/driver version is active on a given subcomponent, with a mismatch indicating an outdated or failed firmware update.
What Can Be Monitored
- controller manufacturer/product/version identity
- serial number
- installation/verification status
- subcomponent software/firmware index
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| symbios | 1.3.6.1.4.1.1123 | |||
| cosprings | 1.3.6.1.4.1.1123.3 | |||
| scsi | 1.3.6.1.4.1.1123.3.1 | |||
| fam8xx | 1.3.6.1.4.1.1123.3.1.2 | |||
| id20 | 1.3.6.1.4.1.1123.3.1.2.20 | |||
| dmtfGroups | 1.3.6.1.4.1.1123.3.1.2.20.1 | |||
| tComponentid | 1.3.6.1.4.1.1123.3.1.2.20.1.1 | not-accessible | This group defines the attributes common to all components. This group is required. | |
| eComponentid | 1.3.6.1.4.1.1123.3.1.2.20.1.1.1 | not-accessible | ||
| STR a1Manufacturer | 1.3.6.1.4.1.1123.3.1.2.20.1.1.1.1 | DmiDisplaystring | read-only | Manufacturer of this component. |
| STR a1Product | 1.3.6.1.4.1.1123.3.1.2.20.1.1.1.2 | DmiDisplaystring | read-only | Product name for this component. |
| STR a1Version | 1.3.6.1.4.1.1123.3.1.2.20.1.1.1.3 | DmiDisplaystring | read-only | Version number of this component. |
| STR a1SerialNumber | 1.3.6.1.4.1.1123.3.1.2.20.1.1.1.4 | DmiDisplaystring | read-only | Serial number for this component |
| DMI a1Installation | 1.3.6.1.4.1.1123.3.1.2.20.1.1.1.5 | DmiDateX | read-only | The installation date and time of this component. The Service Layer assigns this value, the manufacturer should leave it blank. |
| INT a1Verify | 1.3.6.1.4.1.1123.3.1.2.20.1.1.1.6 | INTEGER | read-only | A code that provides a level of verification that the component is still installed and working. |
| tSubcomponentSoftware | 1.3.6.1.4.1.1123.3.1.2.20.1.2 | not-accessible | This group describes the software resources that are used by a component or subcomponent. | |
| eSubcomponentSoftware | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1 | not-accessible | ||
| NUM a2SoftwareIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.1 | DmiInteger | read-only | An index into the SubComponent Software table |
| STR a2Type | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.2 | DmiDisplaystring | read-only | The type of software resource described by this row. For example this value would be 'Device Driver', 'INF File', 'Boot ROM', and etc. |
| STR a2Vendor | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.3 | DmiDisplaystring | read-only | The name of the vendor who supplied this piece of software. |
| STR a2Version | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.4 | DmiDisplaystring | read-only | The revision level of this piece of software. For example the Version Major, Version Minor, Revision, and Build numbers. |
| STR a2Description | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.5 | DmiDisplaystring | read-only | An additional description of this piece of software |
| STR a2IdentificationCode | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.6 | DmiDisplaystring | read-only | The Stock Keeping Unit (SKU) or Part Number for this piece of software. |
| STR a2LanguageEdition | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.7 | DmiDisplaystring | read-only | Identifies the language edition of this piece of software. |
| STR a2InterfaceDescription | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.8 | DmiDisplaystring | read-only | This is the specification or operating system to which this piece of software conforms. (e.g. 'Microsoft NT', 'NetWare', etc.) |
| STR a2InterfaceVersion | 1.3.6.1.4.1.1123.3.1.2.20.1.2.1.9 | DmiDisplaystring | read-only | The specification or operating system version to which this piece of software conforms. (e.g. '4.0 or higher', '3.xx', etc.) |
| tWorldwideIdentifer | 1.3.6.1.4.1.1123.3.1.2.20.1.3 | not-accessible | The Worldwide Identifer | |
| eWorldwideIdentifer | 1.3.6.1.4.1.1123.3.1.2.20.1.3.1 | not-accessible | ||
| NUM a3WorldwideIdentifierIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.3.1.1 | DmiInteger | read-only | An index into the Worldwide Identifier table. |
| INT a3WorldwideIdentifierType | 1.3.6.1.4.1.1123.3.1.2.20.1.3.1.2 | INTEGER | read-only | The type of identifier displayed by the Worldwide Identifier attribute. |
| STR a3WorldwideIdentifier | 1.3.6.1.4.1.1123.3.1.2.20.1.3.1.3 | DmiDisplaystring | read-only | The Worldwide identifier for this device. |
| tFieldReplaceableUnit | 1.3.6.1.4.1.1123.3.1.2.20.1.4 | not-accessible | A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component. | |
| eFieldReplaceableUnit | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1 | not-accessible | ||
| NUM a4FruIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.1 | DmiInteger | read-only | The index into the Field Replaceable Unit table. |
| NUM a4DeviceGroupIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.2 | DmiInteger | read-only | The group ID of the group referencing this Field Replaceable Unit instance. |
| STR a4Description | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.3 | DmiDisplaystring | read-only | A clear description of this Field Replaceable Unit. |
| STR a4Manufacturer | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.4 | DmiDisplaystring | read-only | The name of the company manufacturing or providing this Field Replaceable Unit. |
| STR a4Model | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.5 | DmiDisplaystring | read-only | The manufacturer's model number for this Field Replaceable Unit. |
| STR a4PartNumber | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.6 | DmiDisplaystring | read-only | A part number by which a replacement part can be ordered for this Field Replaceable Unit. |
| STR a4FruSerialNumber | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.7 | DmiDisplaystring | read-only | The manufacturer's serial number for this Field Replaceable Unit. |
| STR a4RevisionLevel | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.8 | DmiDisplaystring | read-only | The revision level of this Field Replaceable Unit. |
| DMI a4WarrantyStartDate | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.9 | DmiDateX | read-only | The start date of the service warranty for this Field Replaceabl Unit. |
| NUM a4WarrantyDuration | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.10 | DmiInteger | read-only | The total duration of this Field Replaceable Unit warranty in months. |
| STR a4SupportPhoneNumber | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.11 | DmiDisplaystring | read-only | The phone number(s) for support for this Field Replaceable Unit. |
| STR a4FruInternetUniformResourceLocator | 1.3.6.1.4.1.1123.3.1.2.20.1.4.1.12 | DmiDisplaystring | read-only | The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU |
| tStorageDevices | 1.3.6.1.4.1.1123.3.1.2.20.1.5 | not-accessible | This group defines the mass storage devices in this system. | |
| eStorageDevices | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1 | not-accessible | ||
| NUM a5StorageDeviceIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.1 | DmiInteger | read-only | An index into the storage device table. |
| INT a5Type | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.2 | INTEGER | read-only | The type of this mass storage device. If 'Other' is used, then the Type Description attribute shall be used. |
| STR a5TypeDescription | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.3 | DmiDisplaystring | read-only | A longer description of the storage device. For example: 3.5 inch flexible diskette drive using diskettes with a maximum capacity of 1.44MB. If 'Other' was specified above, then this field shall be used. Otherwise, the contents of this optional field shall not contradict the Storage Device Type specified above. |
| STR a5Sub_identifier | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.4 | DmiDisplaystring | read-only | The sub-identifier for this storage device (e.g., the device's SCSI logical unit number). |
| NUM a5MediaDataBlockSize | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.5 | DmiInteger | read-only | The size in bytes of the data blocks used on the storage media. If the media block size is unknown or not consistent across the media, then this value shall be zero. |
| NUM a5FormattedMediaCapacity | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.6 | DmiInteger64 | read-only | The total size in bytes of this storage media after it has been formatted. |
| INT a5RemovableDevice | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.7 | INTEGER | read-only | If true, then this storage device is removable (e.g.: PCMCIA device). |
| INT a5DeviceLoaded | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.8 | INTEGER | read-only | If true, then the storage device is loaded. If the device is not removable, then this value shall be 'TRUE'. |
| INT a5RemovableMedia | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.9 | INTEGER | read-only | If true, then the media in this storage device is removable. |
| INT a5MediaLoaded | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.10 | INTEGER | read-only | If true, the media in this storage device is loaded. If the media is not removable, then this value shall be 'TRUE' |
| INT a5Compression | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.11 | INTEGER | read-only | If true, the storage device supports compression. |
| INT a5Encryption | 1.3.6.1.4.1.1123.3.1.2.20.1.5.1.12 | INTEGER | read-only | If true, the storage device supports encryption. |
| tStorageDevicesEvents | 1.3.6.1.4.1.1123.3.1.2.20.1.6 | not-accessible | Storage Devices events. | |
| eStorageDevicesEvents | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1 | not-accessible | ||
| NTF trap1ID20forStorageDevices | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.0.1 | Self-Monitoring Warning (predictive failure - data recovery possible) | ||
| NTF trap2ID20forStorageDevices | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.0.2 | Self-Monitoring Warning (predictive failure - data recovery questionable) | ||
| INT a6StorageDevicesEventType | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.1 | INTEGER | read-only | The type of Storage Devices event that has occurred. |
| INT a6EventSeverity | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.2 | INTEGER | read-only | The severity of this event. |
| INT a6EventIsStateBased | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| NUM a6EventStateKey | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| STR a6AssociatedGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.5 | DmiDisplaystring | read-only | The |
| INT a6EventSystem | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a6EventSubsystem | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a6EventSolution | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| INT a6InstanceDataPresent | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.9 | INTEGER | read-only | Indicates whether the second event block contains instance-speci ic data. |
| STR a6EventMessage | 1.3.6.1.4.1.1123.3.1.2.20.1.6.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| tStorageController | 1.3.6.1.4.1.1123.3.1.2.20.1.7 | not-accessible | This group defines the storage controller in this system. | |
| eStorageController | 1.3.6.1.4.1.1123.3.1.2.20.1.7.1 | not-accessible | ||
| NUM a7ControllerIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.7.1.1 | DmiInteger | read-only | An index into the Storage Controller table. |
| STR a7Identification | 1.3.6.1.4.1.1123.3.1.2.20.1.7.1.2 | DmiDisplaystring | read-only | e.g. Name, brand and hardware revision level of the storage controller. |
| INT a7ProtectionManagement | 1.3.6.1.4.1.1123.3.1.2.20.1.7.1.3 | INTEGER | read-only | Indicates whether or not the controller provides redundancy or protection against device failures. |
| INT a7BusMaster | 1.3.6.1.4.1.1123.3.1.2.20.1.7.1.4 | INTEGER | read-only | If true, then this storage controller is the bus master. |
| NUM a7SecondsSinceLastPower_up | 1.3.6.1.4.1.1123.3.1.2.20.1.7.1.5 | DmiInteger | read-only | The number of seconds that have passed since this controller was last powered on. |
| tStorageControllerEvents | 1.3.6.1.4.1.1123.3.1.2.20.1.8 | not-accessible | Storage Controller events. | |
| eStorageControllerEvents | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1 | not-accessible | ||
| NTF trap3ID20forStorageController | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.0.3 | Storage Controller Error (not responding) | ||
| INT a8StorageControllerEventType | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.1 | INTEGER | read-only | The type of Storage Controller event that has occurred. |
| INT a8EventSeverity | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.2 | INTEGER | read-only | The severity of this event. |
| INT a8EventIsStateBased | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| NUM a8EventStateKey | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| STR a8AssociatedGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.5 | DmiDisplaystring | read-only | The |
| INT a8EventSystem | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a8EventSubsystem | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a8EventSolution | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| INT a8InstanceDataPresent | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.9 | INTEGER | read-only | Indicates whether the second event block contains instance-speci ic data. |
| STR a8EventMessage | 1.3.6.1.4.1.1123.3.1.2.20.1.8.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| tBusPort | 1.3.6.1.4.1.1123.3.1.2.20.1.9 | not-accessible | This global table has one entry for each of the Bus Ports in this Component. | |
| eBusPort | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1 | not-accessible | ||
| NUM a9BusPortIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.1 | DmiInteger | read-only | An index into the Bus Port table. |
| INT a9Protocol | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.2 | INTEGER | read-only | The protocol describing the electrical characteristic of the Bus Port. If 'Other' is used, then the Protocol Description attribute shall be used. |
| STR a9ProtocolDescription | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.3 | DmiDisplaystring | read-only | Additional description of the protocol described above. If 'Other' was specified above, then this field shall be used. Otherwise, the contents of this optional field shall not contradict the Protocol specified above. |
| INT a9SignalCharacteristics | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.4 | INTEGER | read-only | The signal characteristics of the Bus Port being described. |
| STR a9AddressDescriptor | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.5 | DmiDisplaystring | read-only | The address descriptor of this bus port. For example, the SCSI address of this port. |
| INT a9Isochronous | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.6 | INTEGER | read-only | Indicates whether or not this bus port supports isochronous transfers. |
| NUM a9MaximumWidth | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.7 | DmiInteger | read-only | The maximum width, in bits, of this Bus Port's data path. A value of 1 should be used for serial. |
| NUM a9MaximumTransferRate | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.8 | DmiInteger | read-only | The theoretical maximum transfer rate, in millions of bytes per second, that this Bus Port is capable of achieving under ideal conditions. A value of zero should be used if the transfer rate is less than 1 million bytes per second. A value of 0x80000000 should be used if the transfer rate is unknown. |
| NUM a9MaximumNumberOfAttachments | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.9 | DmiInteger | read-only | The maximum number of directly addressable entities supported by this bus port's protocol. A value of zero should be used if the number of attachments is unknown. |
| INT a9ConnectorType | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.10 | INTEGER | read-only | Describes how options (cards, devices, etc.) physically connect to this bus port. If 'Other' is used, then the Connector Type Description attribute shall be used. |
| STR a9ConnectorTypeDescription | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.11 | DmiDisplaystring | read-only | An additional text description of the type of connector describe above. If 'Other' was specified above, then this field shall be used. Otherwis , the contents of this optional field shall not contradict the connector specified above. |
| INT a9ConnectorGender | 1.3.6.1.4.1.1123.3.1.2.20.1.9.1.12 | INTEGER | read-only | Indicates the gender of the connector described above. |
| tFibreChannelBusPortExtensions | 1.3.6.1.4.1.1123.3.1.2.20.1.10 | not-accessible | This group extents the Bus Port group with Fibre Channel specific attributes. | |
| eFibreChannelBusPortExtensions | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1 | not-accessible | ||
| NUM a10BusPortIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1.1 | DmiInteger | read-only | The index into the Bus Port Table that this Fibre Channel group is extending. |
| NUM a10EndToEndCredit | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1.2 | DmiInteger | read-only | The number of allowable outstanding acknowledgments for a sequence. |
| NUM a10BufferToBufferCredit | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1.3 | DmiInteger | read-only | The number of frames which can be handled by the node before a wait for the buffer ready is required, and prior to subsequent frame transmiss ons. |
| INT a10LinkType | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1.4 | INTEGER | read-only | Reports whether copper or fibre media is used. |
| INT a10FlowControlClassType | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1.5 | INTEGER | read-only | Identifies the Flow Control Class Type. |
| INT a10FlowControlAcknowledgmentType | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1.6 | INTEGER | read-only | Identifies the Flow Control Acknowledgment Type. |
| INT a10FabricTopology | 1.3.6.1.4.1.1123.3.1.2.20.1.10.1.7 | INTEGER | read-only | If true, a fabric topology exists within the fibre channel bus port. |
| tMassStorageAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.11 | not-accessible | Mass storage associations define the relationships between the various components of the Storage Subsystem. | |
| eMassStorageAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.11.1 | not-accessible | ||
| NUM a11AssociationIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.11.1.1 | DmiInteger | read-only | An index into the Association table. |
| STR a11Type | 1.3.6.1.4.1.1123.3.1.2.20.1.11.1.2 | DmiDisplaystring | read-only | This field specifies the type of the association. |
| STR a11Reference1 | 1.3.6.1.4.1.1123.3.1.2.20.1.11.1.3 | DmiDisplaystring | read-only | A reference to an object. |
| STR a11Reference2 | 1.3.6.1.4.1.1123.3.1.2.20.1.11.1.4 | DmiDisplaystring | read-only | A reference to an object. |
| tMassStorageAssociationEvents | 1.3.6.1.4.1.1123.3.1.2.20.1.12 | not-accessible | Mass Storage Association events. | |
| eMassStorageAssociationEvents | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1 | not-accessible | ||
| NTF trap4ID20forMassStorageAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.0.4 | New Storage controller detected | ||
| NTF trap5ID20forMassStorageAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.0.5 | New device detected | ||
| NTF trap6ID20forMassStorageAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.0.6 | Existing controller changed | ||
| NTF trap7ID20forMassStorageAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.0.7 | Existing device changed | ||
| INT a12MassStorageAssociationEventType | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.1 | INTEGER | read-only | The type of Mass storage association where a change has occurred |
| INT a12EventSeverity | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.2 | INTEGER | read-only | The severity of this event. |
| INT a12EventIsStateBased | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| NUM a12EventStateKey | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| STR a12AssociatedGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.5 | DmiDisplaystring | read-only | The class name of the group that is associated with the events defined in this EventGeneration group. |
| INT a12EventSystem | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.6 | INTEGER | read-only | The mass storage association object type which is causing a change. |
| INT a12EventSubsystem | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a12EventSolution | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| INT a12InstanceDataPresent | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.9 | INTEGER | read-only | Indicates whether the second event block contains instance-speci ic data. |
| STR a12EventMessage | 1.3.6.1.4.1.1123.3.1.2.20.1.12.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| tBusPortAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.13 | not-accessible | Bus Port Association | |
| eBusPortAssociation | 1.3.6.1.4.1.1123.3.1.2.20.1.13.1 | not-accessible | ||
| NUM a13BusPortAssociationIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.13.1.1 | DmiInteger | read-only | An index into the Bus Port Association table. This index is the same as the index in the Association group that defines the bus port association. |
| NUM a13NegotiatedSpeed | 1.3.6.1.4.1.1123.3.1.2.20.1.13.1.2 | DmiInteger | read-only | The maximum burst transfer rate, in millions of bytes, which was negotiated between the two associated bus ports. |
| NUM a13NegotiatedWidth | 1.3.6.1.4.1.1123.3.1.2.20.1.13.1.3 | DmiInteger | read-only | The width, in bits, of the bus ports data path which was negotiated between the two associated bus ports. |
| tOperationalState | 1.3.6.1.4.1.1123.3.1.2.20.1.14 | not-accessible | This group provides the operational state, usage, and availabili y status, and administrative state indicators for specific Device Group instance . | |
| eOperationalState | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1 | not-accessible | ||
| NUM a14OperationalStateInstanceIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.1 | DmiInteger | read-only | The Index into the Operational State table. |
| NUM a14DeviceGroupIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.2 | DmiInteger | read-only | The group ID of the group referencing this instance. |
| INT a14OperationalStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.3 | INTEGER | read-only | The operational status of the Device Group instance. |
| INT a14UsageState | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.4 | INTEGER | read-only | The usage state of the Device Group instance. |
| INT a14AvailabilityStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.5 | INTEGER | read-only | The availability status of the Device Group instance. |
| INT a14AdministrativeState | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.6 | INTEGER | read-only | The administrative state of the Device Group instance. |
| NUM a14FatalErrorCount | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.7 | DmiCounter | read-only | The accumulated Fatal or Non-recoverable error count for this Device Group instance. |
| NUM a14MajorErrorCount | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.8 | DmiCounter | read-only | The accumulated Major or Critical error count for this Device Group instance. |
| NUM a14WarningErrorCount | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.9 | DmiCounter | read-only | The accumulated Warning or Non-Critical error count for this Device Group instance. |
| INT a14CurrentErrorStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.10 | INTEGER | read-only | This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status 'Critical' should be reported. |
| INT a14DevicePredictedFailureStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.14.1.11 | INTEGER | read-only | Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device). |
| tSymbiosEventPolling | 1.3.6.1.4.1.1123.3.1.2.20.1.15 | not-accessible | This group is the Symbios Vendor unique group for dealing with Event Polling. | |
| eSymbiosEventPolling | 1.3.6.1.4.1.1123.3.1.2.20.1.15.1 | not-accessible | ||
| NUM a15SymbiosFlag | 1.3.6.1.4.1.1123.3.1.2.20.1.15.1.1 | DmiInteger | read-write | An Symbios Vendor Unique Flag. |
| INT a15SmartEventPolling | 1.3.6.1.4.1.1123.3.1.2.20.1.15.1.2 | INTEGER | read-write | A flag indicating whether or not the CI will poll for SMART events. |
| INT a15ScanEventPolling | 1.3.6.1.4.1.1123.3.1.2.20.1.15.1.3 | INTEGER | read-write | A flag indicating whether or not the CI will scan for a change in Devices and Controllers. |
| INT a15Saf_teEventPolling | 1.3.6.1.4.1.1123.3.1.2.20.1.15.1.4 | INTEGER | read-write | A flag indicating whether or not the CI will poll for SAF-TE events. |
| NUM a15EventPollingPeriod | 1.3.6.1.4.1.1123.3.1.2.20.1.15.1.5 | DmiInteger | read-write | The event poll period in number of minutes. |
| tSymbiosSmartDevice | 1.3.6.1.4.1.1123.3.1.2.20.1.16 | not-accessible | This group is a Symbios Vendor unique group for dealing with Smart Storage Devices. | |
| eSymbiosSmartDevice | 1.3.6.1.4.1.1123.3.1.2.20.1.16.1 | not-accessible | ||
| NUM a16SymSmartDeviceIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.16.1.1 | DmiInteger | read-only | An index into the Symbios Vendor Unique Device info table. This index corresponds to the Storage Device index. |
| INT a16SmartReportingCapability | 1.3.6.1.4.1.1123.3.1.2.20.1.16.1.2 | INTEGER | read-write | A flag indicating the state of a Devices's SMART reporting capability. |
| tSaf_teProcessor | 1.3.6.1.4.1.1123.3.1.2.20.1.17 | not-accessible | This group defines a SAF-TE Processor | |
| eSaf_teProcessor | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1 | not-accessible | ||
| NUM a17Saf_teProcessorIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.1 | DmiInteger | read-only | An index into the SAF-TE processor table. |
| NUM a17StorageControllerIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.2 | DmiInteger | read-only | An index into the Storage Controller table. |
| NUM a17ScsiId | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.3 | DmiInteger64 | read-only | The SCSI target/initiator identifier. |
| NUM a17ScsiLun | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.4 | DmiInteger64 | read-only | The SCSI logical unit number. |
| STR a17VendorId | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.5 | DmiDisplaystring | read-only | The vendor ID that is returned in the Inquiry command |
| STR a17ProductId | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.6 | DmiDisplaystring | read-only | The product ID that is returned in the Inquiry command |
| STR a17FirmwareRevisionLevel | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.7 | DmiDisplaystring | read-only | Identifies the current firmware revision of the SAF-TE processor |
| STR a17EnclosureUniqueIdentifier | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.8 | DmiDisplaystring | read-only | This field specifies the unique unit number for the SAF-TE processor. |
| STR a17Saf_teSpecificationRevisionLevel | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.9 | DmiDisplaystring | read-only | Identifies the revision of the SAF-TE interface specification to which this device claims compliance. |
| INT a17HasLocks | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.10 | INTEGER | read-only | If true, then this SAF-TE processor is contained within an enclosure that has locks. |
| INT a17HasSpeakers | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.11 | INTEGER | read-only | If true, then this SAF-TE processor is contained within an enclosure that has speakers. |
| INT a17DoorLocked | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.12 | INTEGER | read-only | If true, then this SAF-TE processor enclosure is locked. |
| INT a17SpeakerStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.13 | INTEGER | read-only | If true, then this SAF-TE processor enclsoure speakers are turned on. If false, then the speakers are off or not installed. |
| NUM a17PowerOnMinutes | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.14 | DmiInteger | read-only | Total number of power on minutes. |
| NUM a17PowerOnCycles | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.15 | DmiInteger | read-only | Total number of times the SAF-TE enclosure has been power on. |
| INT a17TemperatureOutOfRange | 1.3.6.1.4.1.1123.3.1.2.20.1.17.1.16 | INTEGER | read-only | If true, then the temperature is out of range. |
| tSaf_teControlledFan | 1.3.6.1.4.1.1123.3.1.2.20.1.18 | not-accessible | This group defines status of a fan controlled by a SAF-TE Processor | |
| eSaf_teControlledFan | 1.3.6.1.4.1.1123.3.1.2.20.1.18.1 | not-accessible | ||
| NUM a18Saf_teControlledFanIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.18.1.1 | DmiInteger | read-only | An index into the SAF-TE controlled fan table. |
| NUM a18Saf_teProcessorIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.18.1.2 | DmiInteger | read-only | The Index to the SAF-TE proccessor that is controlling this fan. |
| INT a18Status | 1.3.6.1.4.1.1123.3.1.2.20.1.18.1.3 | INTEGER | read-only | The fan status. |
| tSaf_teControlledPowerSupply | 1.3.6.1.4.1.1123.3.1.2.20.1.19 | not-accessible | This group defines status of a Power Supply controlled by a SAF-TE Processor | |
| eSaf_teControlledPowerSupply | 1.3.6.1.4.1.1123.3.1.2.20.1.19.1 | not-accessible | ||
| NUM a19Saf_teControlledPowerSupplyIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.19.1.1 | DmiInteger | read-only | An index into the SAF-TE controlled Power Supply table. |
| NUM a19Saf_teProcessorIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.19.1.2 | DmiInteger | read-only | The Index to the SAF-TE proccessor that is controlling this Power Supply. |
| INT a19Status | 1.3.6.1.4.1.1123.3.1.2.20.1.19.1.3 | INTEGER | read-only | The Power Supply status. |
| tSaf_teControlledSlot | 1.3.6.1.4.1.1123.3.1.2.20.1.20 | not-accessible | This group defines status of a Slot controlled by a SAF-TE Processor | |
| eSaf_teControlledSlot | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1 | not-accessible | ||
| NUM a20Saf_teControlledSlotIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.1 | DmiInteger | read-only | An index into the SAF-TE controlled Slot table. |
| NUM a20Saf_teProcessorIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.2 | DmiInteger | read-only | The Index to the SAF-TE proccessor table that is controlling this Slot. |
| NUM a20ScsiId | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.3 | DmiInteger64 | read-only | The SCSI target/initiator identifier for this slot. |
| NUM a20NumberOfInsertions | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.4 | DmiInteger | read-only | The total number of device insertions for this slot while the enclosure is powered on. |
| INT a20State | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.5 | INTEGER | read-only | The slot state. |
| INT a20Rebuild | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.6 | INTEGER | read-only | Rebuild status |
| INT a20DeviceFault | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.7 | INTEGER | read-only | If true, the device has exhibited some hardware or data fault. |
| INT a20InFailedArray | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.8 | INTEGER | read-only | If true, the device is in an array and an error has occurred on any member of the array. |
| INT a20InCriticalArray | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.9 | INTEGER | read-only | If true, the device is in an array that is non fault-tolerant. |
| INT a20ParityCheck | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.10 | INTEGER | read-only | If true, the device is in an array that is undergoing a parity check operation. |
| INT a20PredictedFault | 1.3.6.1.4.1.1123.3.1.2.20.1.20.1.11 | INTEGER | read-only | If true, the device has been tagged by a fault prediction algorithm as being likely to fail in the near future. |
| tSaf_teControlledTemperatureSensor | 1.3.6.1.4.1.1123.3.1.2.20.1.21 | not-accessible | This group defines status of a Temperature sensor controlled by a SAF-TE Processor | |
| eSaf_teControlledTemperatureSensor | 1.3.6.1.4.1.1123.3.1.2.20.1.21.1 | not-accessible | ||
| NUM a21Saf_teControlledTemperatureSensorInde | 1.3.6.1.4.1.1123.3.1.2.20.1.21.1.1 | DmiInteger | read-only | An index into the SAF-TE controlled Temperature sensor table. |
| NUM a21Saf_teProcessorIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.21.1.2 | DmiInteger | read-only | The Index to the SAF-TE proccessor that is controlling this Temperature sensor. |
| NUM a21Temperature | 1.3.6.1.4.1.1123.3.1.2.20.1.21.1.3 | DmiInteger | read-only | The current temperature in degrees Fahrenheit. |
| tNetworkAdapter802PortGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.22 | not-accessible | Contains objects related to each of the network ports on the network adapter. | |
| eNetworkAdapter802PortGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.22.1 | not-accessible | ||
| NUM a22PortIndex | 1.3.6.1.4.1.1123.3.1.2.20.1.22.1.1 | DmiInteger | read-only | This attribute is the ordinal of the network port within the network adapter, i.e. the 'port number'. |
| STR a22PermanentNetworkAddress | 1.3.6.1.4.1.1123.3.1.2.20.1.22.1.2 | DmiDisplaystring | read-only | This is the node address stored permanently in the adapter. |
| STR a22CurrentNetworkAddress | 1.3.6.1.4.1.1123.3.1.2.20.1.22.1.3 | DmiDisplaystring | read-only | This is the node address that can be modified by software, sometimes referred to as the Locally Administered Address (LAA). |
| INT a22ConnectorType | 1.3.6.1.4.1.1123.3.1.2.20.1.22.1.4 | INTEGER | read-only | This is the type of connector currently being used to physically attach this port to the LAN. |
| NUM a22DataRate | 1.3.6.1.4.1.1123.3.1.2.20.1.22.1.5 | DmiInteger | read-only | This is the rate at which data is transferred over the LAN in Mbps. |
| tNetworkAdapterHardwareGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.23 | not-accessible | Contains objects related to the network adapter hardware. | |
| eNetworkAdapterHardwareGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.23.1 | not-accessible | ||
| INT a23NetworkTopology | 1.3.6.1.4.1.1123.3.1.2.20.1.23.1.1 | INTEGER | read-only | This is the network media access method/topology supported by this adapter. |
| INT a23TransmissionCapability | 1.3.6.1.4.1.1123.3.1.2.20.1.23.1.2 | INTEGER | read-only | The transmission capabilities of the adapter. |
| NUM a23NetworkAdapterRamSize | 1.3.6.1.4.1.1123.3.1.2.20.1.23.1.3 | DmiInteger | read-only | This is the total size of adapter RAM in Kb. |
| INT a23BusType | 1.3.6.1.4.1.1123.3.1.2.20.1.23.1.4 | INTEGER | read-only | This is the type of bus used to interface the adapter to the host. |
| INT a23BusWidth | 1.3.6.1.4.1.1123.3.1.2.20.1.23.1.5 | INTEGER | read-only | This is the width (in bits) of the data path used to interface the adapter with the host. |
| tEventGenerationForPowerSupply | 1.3.6.1.4.1.1123.3.1.2.20.1.24 | not-accessible | ||
| eEventGenerationForPowerSupply | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1 | not-accessible | ||
| INT a24EventType | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.1 | INTEGER | read-only | The type of event that has occurred. |
| INT a24EventSeverity | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.2 | INTEGER | read-only | The severity of this event. |
| INT a24IsEventState_based | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.3 | INTEGER | read-only | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event isstate-based. Otherwise the Event is notstate-based. |
| NUM a24EventStateKey | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.4 | DmiInteger | read-only | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not defined. |
| STR a24AssociatedGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.5 | DmiDisplaystring | read-only | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| INT a24EventSystem | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.6 | INTEGER | read-only | The major functional aspect of the productcausing the fault. |
| INT a24EventSubsystem | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.7 | INTEGER | read-only | The minor functional aspect of the productcausing the fault. |
| INT a24IsInstanceDataPresent | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.8 | INTEGER | read-only | Indicates whether the second event block containsinstance-specif c data. |
| STR a24EventMessage | 1.3.6.1.4.1.1123.3.1.2.20.1.24.1.9 | DmiDisplaystring | read-only | Auxillary information releated to the eventThis text contains the name of the Probe |
| tEventGenerationForTemperatureProbe | 1.3.6.1.4.1.1123.3.1.2.20.1.25 | not-accessible | ||
| eEventGenerationForTemperatureProbe | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1 | not-accessible | ||
| INT a25EventType | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.1 | INTEGER | read-only | The type of event that has occurred. |
| INT a25EventSeverity | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.2 | INTEGER | read-only | The severity of this event. |
| INT a25IsEventState_based | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.3 | INTEGER | read-only | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event isstate-based. Otherwise the Event is notstate-based. |
| NUM a25EventStateKey | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.4 | DmiInteger | read-only | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not defined. |
| STR a25AssociatedGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.5 | DmiDisplaystring | read-only | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| INT a25EventSystem | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.6 | INTEGER | read-only | The major functional aspect of the productcausing the fault. |
| INT a25EventSubsystem | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.7 | INTEGER | read-only | The minor functional aspect of the productcausing the fault. |
| INT a25IsInstanceDataPresent | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.8 | INTEGER | read-only | Indicates whether the second event block containsinstance-specif c data. |
| STR a25EventMessage | 1.3.6.1.4.1.1123.3.1.2.20.1.25.1.9 | DmiDisplaystring | read-only | Auxillary information releated to the eventThis text contains the name of the Probe |
| tEventGenerationForFans | 1.3.6.1.4.1.1123.3.1.2.20.1.26 | not-accessible | ||
| eEventGenerationForFans | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1 | not-accessible | ||
| INT a26EventType | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.1 | INTEGER | read-only | The type of event that has occurred. |
| INT a26EventSeverity | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.2 | INTEGER | read-only | The severity of this event. |
| INT a26IsEventState_based | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.3 | INTEGER | read-only | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event isstate-based. Otherwise the Event is notstate-based. |
| NUM a26EventStateKey | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.4 | DmiInteger | read-only | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not defined. |
| STR a26AssociatedGroup | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.5 | DmiDisplaystring | read-only | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| INT a26EventSystem | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.6 | INTEGER | read-only | The major functional aspect of the productcausing the fault. |
| INT a26EventSubsystem | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.7 | INTEGER | read-only | The minor functional aspect of the productcausing the fault. |
| INT a26IsInstanceDataPresent | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.8 | INTEGER | read-only | Indicates whether the second event block containsinstance-specif c data. |
| STR a26EventMessage | 1.3.6.1.4.1.1123.3.1.2.20.1.26.1.9 | DmiDisplaystring | read-only | Auxillary information releated to the eventThis text contains the name of the Probe |
| tSymbiosHealth | 1.3.6.1.4.1.1123.3.1.2.20.1.27 | not-accessible | This group is the Symbios Vendor unique group for reporting the health. | |
| eSymbiosHealth | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1 | not-accessible | ||
| INT a27OverallHealthStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1.1 | INTEGER | read-only | Status indicating the overall health. |
| INT a27OverallControllerHealthStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1.2 | INTEGER | read-only | Status indicating the overall health of the controllers. |
| NUM a27Non_recoverableControllers | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1.3 | DmiInteger | read-only | The number of controllers reporting a non-recoverable status. |
| NUM a27DegradedControllers | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1.4 | DmiInteger | read-only | The number of controllers reporting a degraded status. |
| INT a27OverallDeviceHealthStatus | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1.5 | INTEGER | read-only | Status indicating the overall health of the devices. |
| NUM a27Non_recoverableDevices | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1.6 | DmiInteger | read-only | The number of devices reporting a non-recoverable status. |
| NUM a27DegradedDevices | 1.3.6.1.4.1.1123.3.1.2.20.1.27.1.7 | DmiInteger | read-only | The number of devices reporting a degraded status. |
| tMiftomib | 1.3.6.1.4.1.1123.3.1.2.20.1.99 | not-accessible | This group defines attributes required for DMI to SNMP translati n. | |
| eMiftomib | 1.3.6.1.4.1.1123.3.1.2.20.1.99.1 | not-accessible | ||
| STR a99MibName | 1.3.6.1.4.1.1123.3.1.2.20.1.99.1.1 | DmiDisplaystring | read-only | The MIB name that defines this MIF |
| STR a99MibOid | 1.3.6.1.4.1.1123.3.1.2.20.1.99.1.2 | DmiDisplaystring | read-only | The MIB OID that corresponds to this MIF |
| NUM a99DisableTrap | 1.3.6.1.4.1.1123.3.1.2.20.1.99.1.3 | DmiInteger | read-write | This attribute can be changed to disable sending oftraps from this component |
RFC description
Symbios Logic SCSI device management MIB for monitoring storage device controllers and subsystems. Contains objects for media status, device configuration, and storage device health monitoring via SNMP.
Start monitoring Symbios/LSI SCSI storage controller, legacy server (DMI/MIF hardware/firmware inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.