All MIBs › SW-QBRD-MIB
Description: SW-QBRD-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SW-QBRD-MIB?
SW-QBRD-MIB is a MIB module for which no module description or sample objects were available in the source, so its exact vendor, technology area, and object set cannot be confirmed from the provided material. Based on its naming convention ("SW" for switch, "QBRD" suggesting a specific board or quad-board hardware variant), it likely belongs to a switch or network-equipment vendor's private enterprise tree describing board-level configuration or status objects. Without any extracted objects it is not possible to state with confidence whether it exposes interface, environmental, performance, or fault data, or how it would be used for hardware/software status monitoring. No dependency information is available either. It would presumably be deployed alongside other modules from the same vendor's switch management MIB family, though without a confirmed source, administrators seeking a SW-QBRD-MIB download should verify the file's origin before loading it into a MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SW-QBRD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link ES2000 'Golf' series managed switch (Marconi enterprise OID branding)
Monitoring Examples
No sample objects were provided for this module, so no concrete monitoring scenario or object names can be honestly described; the module content is effectively empty in the supplied source.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| TimeTicks | |
| enterprises |
From RFC1493-MIB
| dot1dBasePort | OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| marconi | 1.3.6.1.4.1.326 | |||
| systems | 1.3.6.1.4.1.326.2 | |||
| external | 1.3.6.1.4.1.326.2.20 | |||
| dlink | 1.3.6.1.4.1.326.2.20.1 | |||
| dlinkcommon | 1.3.6.1.4.1.326.2.20.1.1 | |||
| golf | 1.3.6.1.4.1.326.2.20.1.2 | |||
| golfproducts | 1.3.6.1.4.1.326.2.20.1.2.1 | |||
| es2000 | 1.3.6.1.4.1.326.2.20.1.2.1.3 | |||
| golfcommon | 1.3.6.1.4.1.326.2.20.1.2.2 | |||
| marconi_mgmt | 1.3.6.1.4.1.326.2.20.1.2.2.2 | |||
| es2000Mgmt | 1.3.6.1.4.1.326.2.20.1.2.2.2.28 | |||
| swL2Mgmt | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 | |||
| swVlan | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8 | |||
| qBridgeMIBObjects | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5 | |||
| dot1qBase | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.1 | |||
| INT dot1qVlanVersionNumber | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.1.1 | INTEGER | read-only | The version number of IEEE 802.1Q that this device supports. |
| VLA dot1qMaxVlanId | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.1.2 | VlanId | read-only | The maximum IEEE 802.1Q VLAN ID that this device supports. |
| U32 dot1qMaxSupportedVlans | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.1.3 | Unsigned32 | read-only | The maximum number of IEEE 802.1Q VLANs that this device supports. |
| U32 dot1qNumVlans | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.1.4 | Unsigned32 | read-only | The current number of IEEE 802.1Q VLANs that are configured in this device. |
| ENA dot1qGvrpStatus | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.1.5 | EnabledStatus | read-write | The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports. |
| dot1qTp | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2 | |||
| dot1qFdbTable | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.1 | not-accessible | A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the dot1qVlanCurrentTable. | |
| dot1qFdbEntry | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.1.1 | not-accessible | Information about a specific Filtering Database. | |
| U32 dot1qFdbId | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.1.1.1 | Unsigned32 | not-accessible | The identity of this Filtering Database. |
| CTR dot1qFdbDynamicCount | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.1.1.2 | Counter | read-only | The current number of dynamic entries in this Filtering Database. |
| dot1qTpFdbTable | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.2 | not-accessible | A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | |
| dot1qTpFdbEntry | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.2.1 | not-accessible | Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information. | |
| MAC dot1qTpFdbAddress | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.2.1.1 | MacAddress | not-accessible | A unicast MAC address for which the device has forwarding and/or filtering information. |
| INT dot1qTpFdbPort | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.2.1.2 | INTEGER | read-only | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g. in the dot1qStaticUnicastTable). Implementers are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1qTpFdbStatus is not learned(3). |
| INT dot1qTpFdbStatus | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.2.1.3 | INTEGER | read-only | The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1qTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of dot1qTpFdbAddress represents one of the device's addresses. The corresponding instance of dot1qTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress is also the value of an existing instance of dot1qStaticAddress. |
| dot1qTpGroupTable | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.3 | not-accessible | A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded. | |
| dot1qTpGroupEntry | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.3.1 | not-accessible | Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. The subset of these ports learnt dynamically is also provided. | |
| MAC dot1qTpGroupAddress | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.3.1.1 | MacAddress | not-accessible | The destination Group MAC address in a frame to which this entry's filtering information applies. |
| POR dot1qTpGroupEgressPorts | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.3.1.2 | PortList | read-only | The complete set of ports, in this Filtering Database, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the dot1qForwardAllPorts list. |
| POR dot1qTpGroupLearnt | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.2.3.1.3 | PortList | read-only | The subset of ports in dot1qTpGroupEgressPorts which were learnt by GMRP or some other dynamic mechanism, in this Filtering database. |
| dot1qStatic | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.3 | |||
| dot1qVlan | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4 | |||
| CTR dot1qVlanNumDeletes | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.1 | Counter | read-only | The number of times a VLAN entry has been deleted from the dot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. |
| dot1qVlanCurrentTable | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2 | not-accessible | A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. | |
| dot1qVlanCurrentEntry | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1 | not-accessible | Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. | |
| TIM dot1qVlanTimeMark | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1.1 | TimeFilter | not-accessible | A TimeFilter for this entry. See the TimeFilter textual convention to see how this works. |
| VLA dot1qVlanIndex | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1.2 | VlanIndex | not-accessible | The VLAN-ID or other identifier refering to this VLAN. |
| U32 dot1qVlanFdbId | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1.3 | Unsigned32 | read-only | The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in dot1qLearningConstraintsTable. |
| POR dot1qVlanCurrentEgressPorts | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1.4 | PortList | read-only | The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. |
| POR dot1qVlanCurrentUntaggedPorts | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1.5 | PortList | read-only | The set of ports which are transmitting traffic for this VLAN as untagged frames. |
| INT dot1qVlanStatus | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1.6 | INTEGER | read-only | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent dot1qVlanStaticTable entry and ports learnt dynamically. dynamicGvrp(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN and it will be removed when the last port leaves the VLAN. |
| TIK dot1qVlanCreationTime | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.2.1.7 | TimeTicks | read-only | The value of sysUpTime when this VLAN was created. |
| dot1qVlanStaticTable | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3 | not-accessible | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset. | |
| dot1qVlanStaticEntry | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1 | not-accessible | Static information for a VLAN configured into the device by (local or network) management. | |
| STR dot1qVlanStaticName | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.1 | DisplayString | read-write | An administratively assigned string, which may be used to identify the VLAN. |
| POR dot1qVlanStaticEgressPorts | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.2 | PortList | read-write | The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed. |
| POR dot1qVlanForbiddenEgressPorts | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.3 | PortList | read-only | The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set. |
| POR dot1qVlanStaticUntaggedPorts | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.4 | PortList | read-write | The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (VlanId 001) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device cannot support a value being set then its agent will reject the set operation. Attempts to set more than one VLAN to be untagged on egress may be rejected by devices which do not support this option. |
| INT dot1qVlanStaticRowState | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.5 | INTEGER | read-write | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table. |
| dot1qPortVlanTable | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.4 | not-accessible | A table containing per port control and status information for VLAN configuration in the device. | |
| dot1qPortVlanEntry | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.4.1 | not-accessible | Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort. | |
| VLA dot1qPvid | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.4.1.1 | VlanIndex | read-write | The PVID, the VLAN ID assigned to untagged frames or Prority-Tagged frames received on this port. |
| T/F dot1qPortIngressFiltering | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.4.1.2 | TruthValue | read-write | When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP. |
| ENA dot1qPortGvrpStatus | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.4.1.3 | EnabledStatus | read-write | The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port. |
| CTR dot1qPortGvrpFailedRegistrations | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.4.1.4 | Counter | read-only | The total number of failed GVRP registrations, for any reason, on this port. |
| MAC dot1qPortGvrpLastPduOrigin | 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.4.1.5 | MacAddress | read-only | The Source MAC Address of the last GVRP message received on this port. |
RFC description
Implements IEEE 802.1Q VLAN management for D-Link ES2000 series switches with static and dynamic VLAN configuration.
Start monitoring D-Link ES2000 'Golf' series switch (Marconi-branded OEM, IEEE 802.1Q VLAN config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.