All MIBs › SW-QBRD-MIB › dot1qVlanStaticRowState
dot1qVlanStaticRowState
Module: SW-QBRD-MIB
OID (symbolic): SW-QBRD-MIB::dot1qVlanStaticRowState
OID (numeric): 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
What is dot1qVlanStaticRowState?
This value reports the lifecycle state of a static VLAN table entry: other(1) means the entry is active for reasons outside the normal valid/invalid model, invalid(2) is written by a manager to trigger removal of that row from the table, and valid(3) simply means the entry is currently present and in use. Administrators use this mechanism to add or delete static VLAN configuration entries by setting this object rather than using a separate delete command. For example, setting this object to invalid(2) on a VLAN 100 entry would cause the switch to remove that static VLAN configuration row.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.5 snmpwalk -v2c -c public <target> SW-QBRD-MIB::dot1qVlanStaticRowState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.5.1 snmpget -v2c -c public <target> SW-QBRD-MIB::dot1qVlanStaticRowState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dot1qVlanStaticRowState.1
Start monitoring D-Link ES2000 'Golf' series switch (Marconi-branded OEM, IEEE 802.1Q VLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SW-QBRD-MIB::dot1qVlanStaticRowState OID value, configure state conditions and alerts, and monitor any D-Link ES2000 'Golf' series switch (Marconi-branded OEM, IEEE 802.1Q VLAN config) from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.326 | fore | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2 | systems | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20 | ethernet | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1 | edge | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2 | golf | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2 | golfcommon | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2 | fore_mgmt | COMMON-GOLF-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28 | es2000Mgmt | SW-COMMON-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 | swL2Mgmt | SW-COMMON-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8 | swVlan | SW-PBRD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5 | qBridgeMIBObjects | SW-QBRD-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4 | dot1qVlan | SW-QBRD-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3 | dot1qVlanStaticTable | SW-QBRD-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1 | dot1qVlanStaticEntry | SW-QBRD-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.5.4.3.1.5 | dot1qVlanStaticRowState | SW-QBRD-MIB |