| OID symbolic | OID numeric | Type | Access | Description |
|---|
| sun | 1.3.6.1.4.1.42 | | | |
| products | 1.3.6.1.4.1.42.2 | | | |
| ilom | 1.3.6.1.4.1.42.2.175 | | | |
| sunHwCtrlMIB | 1.3.6.1.4.1.42.2.175.104 | | | SUN-HW-CTRL-MIB.mib Version 1.1
Copyright 2010, by Sun Microsystems, Inc.
All rights reserved. Use is subject to license terms.
This MIB allows controls for all Sun platform devices using
Integrated Lights Out Management. |
| sunHwCtrlMIBObjects | 1.3.6.1.4.1.42.2.175.104.1 | | | |
| sunHwCtrlPowerMgmt | 1.3.6.1.4.1.42.2.175.104.1.6 | | | |
| I32 sunHwCtrlReservedPSU | 1.3.6.1.4.1.42.2.175.104.1.6.1 | Integer32 | read-write | The number of Reserved PSU's. |
| I32 sunHwCtrlTotalPSU | 1.3.6.1.4.1.42.2.175.104.1.6.2 | Integer32 | read-only | The total number of PSU's. |
| sunHwCtrlPowerMgmtTable | 1.3.6.1.4.1.42.2.175.104.1.6.3 | | not-accessible | A table listing additional power management properties. |
| sunHwCtrlPowerMgmtEntry | 1.3.6.1.4.1.42.2.175.104.1.6.3.1 | | not-accessible | An entry for a power management property. |
| SUN sunHwCtrlPowerMgmtID | 1.3.6.1.4.1.42.2.175.104.1.6.3.1.1 | SunHwCtrlPowerMgmtID | not-accessible | This is an index for the sunHwCtrlPowerMgmtTable. |
| STR sunHwCtrlPowerMgmtName | 1.3.6.1.4.1.42.2.175.104.1.6.3.1.2 | SnmpAdminString | read-only | This is the name of the power management property. |
| STR sunHwCtrlPowerMgmtUnits | 1.3.6.1.4.1.42.2.175.104.1.6.3.1.3 | SnmpAdminString | read-only | This is the units for the value of the power management property. |
| STR sunHwCtrlPowerMgmtValue | 1.3.6.1.4.1.42.2.175.104.1.6.3.1.4 | SnmpAdminString | read-only | This is the value of the power management property. |
| I32 sunHwCtrlPowerMgmtActualPower | 1.3.6.1.4.1.42.2.175.104.1.6.4 | Integer32 | read-only | Total input power consumed in watts.
On a rackmount server, total power consumption is the
input power consumed by the server.
On a blade, this is the input power consumed just by the
blade (not including any power consumed by shared components).
On a CMM this is the input power consumed by the entire chassis
or shelf, all blades, NEMs, fans, etc. |
| I32 sunHwCtrlPowerMgmtPermittedPower | 1.3.6.1.4.1.42.2.175.104.1.6.5 | Integer32 | read-only | Maximum input power consumption in watts.
On a rackmount server, the maximum power consumption is the maximum
input power the server guarantees it will consume at any instant.
On a blade, this is the maximum input power a blade guarantees it will
consume, not including its power load on shared components.
On a CMM this is the maximum input power the entire chassis
(all blades, NEMs, fans, etc.) will consume at any instant.
This value can't be changed directly, but may change based on the power
policy and budget, and chassis power capacity. |
| I32 sunHwCtrlPowerMgmtAvailablePower | 1.3.6.1.4.1.42.2.175.104.1.6.6 | Integer32 | read-only | Maximum input power capacity in watts.
Power capacity is the maximum input power the power supplies
are capable of consuming.
On a blade, this is the amount of power guaranteed available
to the blade by the chassis. |
| SUN sunHwCtrlPowerMgmtPolicy | 1.3.6.1.4.1.42.2.175.104.1.6.7 | SunHwCtrlPowerMgmtPolicy | read-write | Indicates the desired power managment policy. |
| sunHwCtrlPowerMgmtBudgetSettings | 1.3.6.1.4.1.42.2.175.104.1.6.9 | | | |
| INT sunHwCtrlPowerMgmtBudget | 1.3.6.1.4.1.42.2.175.104.1.6.9.1 | INTEGER | read-write | When reading, the current state of the following budget settings:
sunHwCtrlPowerMgmtBudgetMinPowerlimit
sunHwCtrlPowerMgmtBudgetPowerlimit
sunHwCtrlPowerMgmtBudgetTimelimit
sunHwCtrlPowerMgmtBudgetTimelimitActions
If unknown(1), the agent could not determine the current state.
If disabled(2), the settings are not currently in effect.
If enabled(3), the settings are currently in effect.
If enabledPostPoweron(4), the settings will take effect
after the processor is powered on.
When writing, only disabled(2) and enabled(3) are valid values.
If set to enabled(3) while the system if powered off, the budget
will not be enforced until the system powers on and this will
transition to enabledPostPoweron(4).
If set to enabled(3) when the current budget settings are not
supported, this will transition to disabled(2). |
| I32 sunHwCtrlPowerMgmtBudgetMinPowerlimit | 1.3.6.1.4.1.42.2.175.104.1.6.9.2 | Integer32 | read-only | Minimum value sunHwCtrlPowerMgmtBudgetPowerlimit can be set to.
The power capper can control power consumption to fit within
as little as this amount of power when the system is powered on. |
| I32 sunHwCtrlPowerMgmtBudgetPowerlimit | 1.3.6.1.4.1.42.2.175.104.1.6.9.3 | Integer32 | read-only | Maximum power consumption in watts. |
| I32 sunHwCtrlPowerMgmtBudgetTimelimit | 1.3.6.1.4.1.42.2.175.104.1.6.9.5 | Integer32 | read-only | Grace period for exceeding the powerlimit once the powerlimit
has been achieved, in milliseconds. |
| SUN sunHwCtrlPowerMgmtBudgetTimelimitActions | 1.3.6.1.4.1.42.2.175.104.1.6.9.6 | SunHwCtrlPowerMgmtBudgetTimelimitActions | read-only | List of actions that will occur if the power limit is exceeded and
cannot be controlled within the timelimit.
hardpoweroff(1) causes a hard power off if the timelimit is exceeded. |
| T/F sunHwCtrlPowerMgmtBudgetOK | 1.3.6.1.4.1.42.2.175.104.1.6.9.7 | TruthValue | read-only | 'true' if sunHwCtrlPowerMgmtBudget is 'disabled(2)'.
If sunHwCtrlPowerMgmtBudget is 'enabled(3)',
sunHwCtrlPowerMgmtBudgetOK will be 'false' if the power consumption
has been over the power limit (sunHwCtrlPowerMgmtBudgetPowerlimit)
for more than the time limit (sunHwCtrlPowerMgmtBudgetTimelimit),
otherwise 'true'.
Returns to 'true' when power consumption drops to or below the
powerlimit after a violation.
This value will also be 'false' if the budget is enabled but the
budget settings are not supported. (This could happen if saved
budget settings are no longer valid after a reboot.) |
| T/F sunHwCtrlPowerMgmtBudgetCommitPending | 1.3.6.1.4.1.42.2.175.104.1.6.9.100 | TruthValue | read-write | Commits the following pending values:
sunHwCtrlPowerMgmtBudgetPendingPowerlimit
sunHwCtrlPowerMgmtBudgetPendingTimelimit
sunHwCtrlPowerMgmtBudgetPendingTimelimitActions
May only be set to true. |
| I32 sunHwCtrlPowerMgmtBudgetPendingPowerlimit | 1.3.6.1.4.1.42.2.175.104.1.6.9.103 | Integer32 | read-write | When committed, the value is applied to
sunHwCtrlPowerMgmtBudgetPowerlimit. |
| I32 sunHwCtrlPowerMgmtBudgetPendingTimelimit | 1.3.6.1.4.1.42.2.175.104.1.6.9.105 | Integer32 | read-write | When committed, the value is applied to
sunHwCtrlPowerMgmtBudgetTimelimit.
A value of -1 instructs the system to use its' default value. |
| SUN sunHwCtrlPowerMgmtBudgetPendingTimelimitActions | 1.3.6.1.4.1.42.2.175.104.1.6.9.106 | SunHwCtrlPowerMgmtBudgetTimelimitActions | read-write | When committed, the value is applied to
sunHwCtrlPowerMgmtBudgetTimelimitActions. |
| sunHwCtrlPowerMgmtConsumptionThresholds | 1.3.6.1.4.1.42.2.175.104.1.6.10 | | | |
| I32 sunHwCtrlPowerMgmtConsumptionThreshold1 | 1.3.6.1.4.1.42.2.175.104.1.6.10.1 | Integer32 | read-write | A threshold that determines if ILOM threshold events get
generated based on the value of the system power consumption sensor
(typically /SYS/VPS).
Valid values are 0 (zero) when disabled; greater than 0 generates
threshold crossing event. |
| I32 sunHwCtrlPowerMgmtConsumptionThreshold2 | 1.3.6.1.4.1.42.2.175.104.1.6.10.2 | Integer32 | read-write | A threshold that determines if ILOM threshold events get
generated based on the value of the system power consumption sensor
(typically /SYS/VPS).
Valid values are 0 (zero) when disabled; greater than 0 generates
threshold crossing event. |
| sunHwCtrlPowerMgmtSampling | 1.3.6.1.4.1.42.2.175.104.1.6.11 | | | |
| I32 sunHwCtrlPowerMgmtSamplingPeriod | 1.3.6.1.4.1.42.2.175.104.1.6.11.1 | Integer32 | read-write | Sampling period over which sunHwCtrlPowerMgmtSamplingMinimumPower,
sunHwCtrlPowerMgmtSamplingMaximumPower and
sunHwCtrlPowerMgmtSamplingAveragePower are calculated and reported,
in seconds.
Supported range and granularity are platform specific. |
| DAT sunHwCtrlPowerMgmtSamplingTimestamp | 1.3.6.1.4.1.42.2.175.104.1.6.11.2 | DateAndTime | read-only | Date and time at which the power consumption values were calculated. |
| I32 sunHwCtrlPowerMgmtSamplingMinimumPower | 1.3.6.1.4.1.42.2.175.104.1.6.11.3 | Integer32 | read-only | Minimum measured power consumption during most recent sampling period,
in watts |
| I32 sunHwCtrlPowerMgmtSamplingMaximumPower | 1.3.6.1.4.1.42.2.175.104.1.6.11.4 | Integer32 | read-only | Maximum measured power consumption during most recent sampling period,
in watts |
| I32 sunHwCtrlPowerMgmtSamplingAveragePower | 1.3.6.1.4.1.42.2.175.104.1.6.11.5 | Integer32 | read-only | Average measured power consumption during most recent sampling period,
in watts |
| sunHwCtrlTPM | 1.3.6.1.4.1.42.2.175.104.1.7 | | | |
| T/F sunHwCtrlTpmEnable | 1.3.6.1.4.1.42.2.175.104.1.7.1 | TruthValue | read-write | sunHwCtrlTpmEnable is the principal control for any action being
taken to change the access mode(s) of the TPM device.
Any attempt to change sunHwCtrlTpmEnable when the host power is on
will generate an inconsistentValue (or badValue for SNMPv1) error.
When sunHwCtrlTpmEnable is set to false(2), no changes to
sunHwCtrlTpmActivate will succeed,
and the TPM device will be disabled during the next host power on
event.
If sunHwCtrlTpmEnable is set to true(1), the TPM device will be
enabled during the next host power on.
The default state of sunHwCtrlTpmEnable is false(2). |
| T/F sunHwCtrlTpmActivate | 1.3.6.1.4.1.42.2.175.104.1.7.2 | TruthValue | read-write | If sunHwCtrlTpmActivate and sunHwCtrlTpmEnable are both currently
true(1) during a host power on event, the TPM device will be
enabled and activated.
If sunHwCtrlTpmActivate is currently false(2) and sunHwCtrlTpmEnable
is currently true(1) during a host power on event, the TPM device
will be enabled and deactivated.
When sunHwCtrlTpmEnable is set to false(2), no changes to
sunHwCtrlTpmActivate will succeed.
The default state of sunHwCtrlTpmActivate is false(2). |
| T/F sunHwCtrlTpmForceClear | 1.3.6.1.4.1.42.2.175.104.1.7.3 | TruthValue | read-write | If sunHwCtrlTpmForceClear and sunHwCtrlTpmEnable are both currently
true(1) during a host power on event, the TPM device state will be
purged and the state of sunHwCtrlTpmForceClear will return to
false(2).
If sunHwCtrlTpmForceClear is currently true(1) and sunHwCtrlTpmEnable
is currently false(2) during a host power on event, the TPM device
will not be enabled, no action is taken with regard to the state of
the TPM device, and sunHwCtrlTpmForceClear remains true(1).
If sunHwCtrlTpmForceClear is currently false(2) and sunHwCtrlTpmEnable
is currently true(1) during a host power on event, the TPM device
will be enabled, no action is taken with regard to the state of the
TPM device, and sunHwCtrlTpmForceClear remains false(2).
When sunHwCtrlTpmEnable is set to false(2), no changes to
sunHwCtrlTpmForceClear will succeed. |
| sunHwCtrlMIBConformances | 1.3.6.1.4.1.42.2.175.104.2 | | | |
| sunHwCtrlCompliances | 1.3.6.1.4.1.42.2.175.104.2.1 | | | |
| sunHwCtrlGroups | 1.3.6.1.4.1.42.2.175.104.2.2 | | | |
| sunHwCtrlObjectsGroup | 1.3.6.1.4.1.42.2.175.104.2.2.1 | | | The group of current objects. |
