STN-VERSION-MIB

All MIBs › STN-VERSION-MIB

Organization: Spring Tide Networks, Inc.

Last Updated: 2000-02-16

Category: SMI / Registration, Spring Tide Networks

Description: Provides Spring Tide Networks software version, build, and firmware identification objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is STN-VERSION-MIB?

STN-VERSION-MIB is a proprietary MIB module from Spring Tide Networks used to identify the software and hardware versions running on Spring Tide broadband service switch/router platforms. It belongs to the Spring Tide Networks enterprise MIB tree and is narrowly scoped to version/build/firmware identification rather than broad device management. Its data falls under the software status category of device monitoring: administrators use it to confirm which software release, build, and firmware revision is active on a device, which is essential for verifying upgrade rollouts and troubleshooting version-specific bugs. It appears to be a self-contained module with no significant dependency on external standard MIBs. It would typically be deployed on Spring Tide broadband aggregation/service switches as part of routine inventory and change-management polling. Engineers can download the STN-VERSION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in STN-VERSION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Spring Tide Networks broadband service switches/routers

Monitoring Examples

An administrator would poll the software version, build number, firmware version, and hardware version objects in this MIB to confirm a Spring Tide device is running the expected release after a maintenance window or firmware upgrade. A mismatch between the reported build and the intended target version would flag an incomplete or failed upgrade. Because the module description only references software/hardware version identification with no sample object names provided, the objects named here are inferred directly from that stated purpose.

What Can Be Monitored

software version
build number
firmware version
hardware version

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From SPRING-TIDE-NETWORKS-SMI

stnNotification	OBJECT-IDENTITY
stnSystems	OBJECT-IDENTITY

From SPRING-TIDE-NETWORKS-TC

StnHardwareModuleType

From STN-CHASSIS-MIB

stnEngineCpu	OBJECT-TYPE
stnEngineIndex	OBJECT-TYPE
stnEngineSlot	OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
stnVersion	1.3.6.1.4.1.3551.2.2			This MIB module describes the Spring Tide Networks software and hardware versions.
stnVersionObjects	1.3.6.1.4.1.3551.2.2.1
stnSwVersions	1.3.6.1.4.1.3551.2.2.1.1
stnSwVersionTable	1.3.6.1.4.1.3551.2.2.1.1.1		not-accessible	A list of system software and gateware version entries.
stnSwVersionEntry	1.3.6.1.4.1.3551.2.2.1.1.1.1		not-accessible	Entry contains information about a particular system software or gateware version.
INT stnSwImage	1.3.6.1.4.1.3551.2.2.1.1.1.1.1	INTEGER	read-only	Indicates the software image type.
STR stnSwVersionPrefix	1.3.6.1.4.1.3551.2.2.1.1.1.1.2	DisplayString	read-only	The software image version prefix.
I32 stnSwMajorVersion	1.3.6.1.4.1.3551.2.2.1.1.1.1.3	Integer32	read-only	The software image major version.
I32 stnSwMinorVersion	1.3.6.1.4.1.3551.2.2.1.1.1.1.4	Integer32	read-only	The software image minor version.
I32 stnSwMaintenanceVersion	1.3.6.1.4.1.3551.2.2.1.1.1.1.5	Integer32	read-only	The software image maintenance version.
I32 stnSwPatchVersion	1.3.6.1.4.1.3551.2.2.1.1.1.1.6	Integer32	read-only	The software image patch version.
STR stnSwVersionDescr	1.3.6.1.4.1.3551.2.2.1.1.1.1.7	DisplayString	read-only	A descriptive string used to describe the software type and version.
stnHwVersions	1.3.6.1.4.1.3551.2.2.1.2
stnHwVersionTable	1.3.6.1.4.1.3551.2.2.1.2.1		not-accessible	A list of system hardware version entries.
stnHwVersionEntry	1.3.6.1.4.1.3551.2.2.1.2.1.1		not-accessible	Entry contains information about all hardware versions and identification information.
I32 stnHwSlotIndex	1.3.6.1.4.1.3551.2.2.1.2.1.1.1	Integer32	not-accessible	A sequence number that identifies a particular slot in the chassis.
STN stnHwType	1.3.6.1.4.1.3551.2.2.1.2.1.1.2	StnHardwareModuleType	read-only	Indicates the hardware type located in the specific slot.
I32 stnHwMajorVersion	1.3.6.1.4.1.3551.2.2.1.2.1.1.3	Integer32	read-only	The hardware major version of the module.
I32 stnHwMinorVersion	1.3.6.1.4.1.3551.2.2.1.2.1.1.4	Integer32	read-only	The hardware minor version of the module.
STR stnHwVersionDescr	1.3.6.1.4.1.3551.2.2.1.2.1.1.5	DisplayString	read-only	A descriptive string used to describe the hardware type and version.
STR stnHwSerialNumber	1.3.6.1.4.1.3551.2.2.1.2.1.1.6	DisplayString	read-only	The serial number of the hardware module.
stnVersionMibConformance	1.3.6.1.4.1.3551.2.2.2
NTF stnSwImageUpgraded	1.3.6.1.4.1.3551.2.100.0.51			A stnSwImageUpgraded trap signifies that the agent entity has detected that the indicated software image has been successfully upgraded to all appropriate engines. The generation of this trap can be controlled by the SwUpgradeTraps configuration object.
NTF stnSwImageUpgradeFailure	1.3.6.1.4.1.3551.2.100.0.52			A stnSwImageUpgradeFailure trap signifies that the agent entity has detected that the indicated software image has failed to load into all appropriate engines. The generation of this trap can be controlled by the SwUpgradeTraps configuration object.
NTF stnSwImageNotFound	1.3.6.1.4.1.3551.2.100.0.53			A stnSwImageNotFound trap signifies that the agent entity has detected that the indicated software image cannot be found. The generation of this trap can be controlled by the SwUpgradeTraps configuration object.
NTF stnSwImageAutoDowngraded	1.3.6.1.4.1.3551.2.100.0.54			A stnSwImageAutoDowngraded trap signifies that the agent entity has detected that the indicated software image cannot successfully execute on the system and has been automatically downgraded. The first stnSwVersionDescr associated with this notification is the current operational image, while the second stnSwVersionDescr is the failed image. The generation of this trap can be controlled by the SwUpgradeTraps configuration object.

RFC description

Vendor-private MIB (likely Sycamore Networks) defining version and software information for managed devices.

Start monitoring Spring Tide Networks (Lucent) broadband service switch/router (software/hardware version identification) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download STN-VERSION-MIB

What Is STN-VERSION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description