STN-PPTP-TRAP-MIB

All MIBs › STN-PPTP-TRAP-MIB

Organization: Spring Tide Networks, Inc.

Last Updated: 2000-02-16

Category: IPsec / VPN, Spring Tide Networks, Traps / Notifications

Description: Defines PPTP event trap notifications for Spring Tide Networks tunnel state changes and errors.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is STN-PPTP-TRAP-MIB?

STN-PPTP-TRAP-MIB is a vendor-specific MIB from Spring Tide Networks defining SNMP trap notifications for PPTP (Point-to-Point Tunneling Protocol) tunnel events on its network equipment. It focuses on notification/fault definitions for tunnel state changes and error conditions rather than polled configuration tables. Its monitoring value is fault/event oriented: it lets a management station be alerted asynchronously when a PPTP tunnel goes down, fails to establish, or encounters an error, rather than requiring continuous polling of tunnel counters. No sample objects were available confirming specific trap variable names, so exact fields cannot be listed with confidence. It is deployed on Spring Tide Networks routers/gateways offering PPTP VPN tunneling in service-provider or enterprise remote-access networks. Engineers can download the STN-PPTP-TRAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in STN-PPTP-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Spring Tide Networks router/VPN gateway

Monitoring Examples

No runtime sample objects were provided for this MIB beyond its stated purpose as a PPTP trap definitions module, so a concrete polled-object monitoring scenario cannot be responsibly constructed; in practice a management station would subscribe to these traps to be alerted of PPTP tunnel state changes and errors as they occur rather than polling for them.

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From SPRING-TIDE-NETWORKS-SMI

stnNotification

OBJECT-IDENTITY

From STN-CHASSIS-MIB

stnEngineCpu	OBJECT-TYPE
stnEngineIndex	OBJECT-TYPE
stnEngineSlot	OBJECT-TYPE

From STN-PPTP-MIB

stnPptpTraps

OBJECT-IDENTITY

From STN-ROUTER-MIB

stnRouterIndex	OBJECT-TYPE
stnSubnetInterfaceIndex	OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
stnPptpTrap	1.3.6.1.4.1.3551.4.1.10.3.1			This MIB module describes the traps for Spring Tide Networks PPTP.
stnPptpTrapVars	1.3.6.1.4.1.3551.4.1.10.3.1.1
STR stnPptpTunnelLocalHostname	1.3.6.1.4.1.3551.4.1.10.3.1.1.1	DisplayString	read-only	This object contains the host name supplied during the tunnel establishment phase to the PPTP peer.
IP stnPptpTunnelLocalIpAddress	1.3.6.1.4.1.3551.4.1.10.3.1.1.2	IpAddress	read-only	This object contains the local IP address of the tunnel endpoint.
STR stnPptpTunnelRemoteHostname	1.3.6.1.4.1.3551.4.1.10.3.1.1.3	DisplayString	read-only	This object contains the host name as discovered during the tunnel establishment phase of the PPTP peer.
IP stnPptpTunnelRemoteIpAddress	1.3.6.1.4.1.3551.4.1.10.3.1.1.4	IpAddress	read-only	This object contains the IP address of the remote tunnel endpoint.
stnPptpNotificationPrefix	1.3.6.1.4.1.3551.4.1.10.3.1.2
stnPptpNotification	1.3.6.1.4.1.3551.4.1.10.3.1.2.0
NTF stnTunnelPptpAuthenFailure	1.3.6.1.4.1.3551.4.1.10.3.1.2.0.1			A stnTunnelPptpAuthenFailure trap signifies that the agent entity has detected an attempt to establish a tunnel to a remote peer has failed authentication. The generation of this trap can be controlled by the PPTPTraps configuration object.
NTF stnTunnelPptpLimitExceeded	1.3.6.1.4.1.3551.4.1.10.3.1.2.0.2			A stnTunnelPptpLimitExceeded trap signifies that the agent entity has detected that the number of PPTP tunnels allowed on the indicated slot/cpu has been exceeded. The generation of this trap can be controlled by the PPTPTraps configuration object.
NTF stnTunnelPacProvLimitExceeded	1.3.6.1.4.1.3551.4.1.10.3.1.2.0.3			A stnTunnelPacProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP locally initiated tunnels allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.
NTF stnTunnelPnsProvLimitExceeded	1.3.6.1.4.1.3551.4.1.10.3.1.2.0.4			A stnTunnelPnsProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP remotely initiated tunnels allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.
NTF stnCallPptpLimitExceeded	1.3.6.1.4.1.3551.4.1.10.3.1.2.0.5			A stnCallPptpLimitExceeded trap signifies that the agent entity has detected that the number of PPTP calls allowed on the indicated slot/cpu has been exceeded. The generation of this trap can be controlled by the PPTPTraps configuration object.
NTF stnCallPacProvLimitExceeded	1.3.6.1.4.1.3551.4.1.10.3.1.2.0.6			A stnCallPacProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP locally initiated calls allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.
NTF stnCallPnsProvLimitExceeded	1.3.6.1.4.1.3551.4.1.10.3.1.2.0.7			A stnCallPnsProvLimitExceeded trap signifies that the agent entity has detected that the number of PPTP remotely initiated calls allowed by the provisioner has been exceeded for the indicated router. The generation of this trap can be controlled by the PPTPTraps configuration object.

RFC description

Defines trap notifications for Point-to-Point Tunneling Protocol (PPTP) on Spring Tide Networks routers.

Start monitoring Spring Tide Networks (Lucent) router/VPN gateway (PPTP tunnel event traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download STN-PPTP-TRAP-MIB

What Is STN-PPTP-TRAP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description