SNMP-REPEATER-MIB :: rptrMonitorPortReadableFrames

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsSNMP-REPEATER-MIBrptrMonitorPortReadableFrames

rptrMonitorPortReadableFrames

Module: SNMP-REPEATER-MIB

OID (symbolic): SNMP-REPEATER-MIB::rptrMonitorPortReadableFrames

OID (numeric): 1.3.6.1.2.1.22.2.3.1.1.3

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not asserted.

A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.

This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours at 10Mb/s.

What is rptrMonitorPortReadableFrames?

Counts valid-length, error-free frames received on this port; an admin uses it as the denominator when computing a port's packet error rate, alongside the various error counters in the same table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.22.2.3.1.1.3
snmpwalk -v2c -c public <target> SNMP-REPEATER-MIB::rptrMonitorPortReadableFrames

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.22.2.3.1.1.3.1
snmpget -v2c -c public <target> SNMP-REPEATER-MIB::rptrMonitorPortReadableFrames.1

Start monitoring vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP-REPEATER-MIB::rptrMonitorPortReadableFrames OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.22snmpDot3RptrMgtLANART-AGENT
1.3.6.1.2.1.22.2rptrMonitorPackageLANART-AGENT
1.3.6.1.2.1.22.2.3rptrMonitorPortInfoLANART-AGENT
1.3.6.1.2.1.22.2.3.1rptrMonitorPortTableLANART-AGENT
1.3.6.1.2.1.22.2.3.1.1rptrMonitorPortEntryLANART-AGENT
Numeric OIDNameModule
1.3.6.1.2.1.22.2.3.1.1.3rptrMonitorPortReadableFramesSNMP-REPEATER-MIB