All MIBs › SNMP-REPEATER-MIB › rptrGroupCapacity
rptrGroupCapacity
Module: SNMP-REPEATER-MIB
OID (symbolic): SNMP-REPEATER-MIB::rptrGroupCapacity
OID (numeric): 1.3.6.1.2.1.22.1.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: ********* THIS OBJECT IS DEPRECATED **********
The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the range from 1 to rptrGroupCapacity.
Some groups may not be present in the repeater, in which case the actual number of groups present will be less than rptrGroupCapacity. The number of groups present will never be greater than rptrGroupCapacity.
Note: In practice, this will generally be the number of field-replaceable units (i.e., modules, cards, or boards) that can fit in the physical repeater enclosure, and the group numbers will correspond to numbers marked on the physical enclosure.
What is rptrGroupCapacity?
A deprecated object reporting the number of groups (field-replaceable units like modules or cards) the repeater can hold; groups are numbered 1 through this value. Superseded by the per-repeater rptrInfoTable, it's kept only for backward compatibility with older RFC 1516 management stations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.22.1.1.1 snmpwalk -v2c -c public <target> SNMP-REPEATER-MIB::rptrGroupCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.22.1.1.1.1 snmpget -v2c -c public <target> SNMP-REPEATER-MIB::rptrGroupCapacity.1
Start monitoring vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNMP-REPEATER-MIB::rptrGroupCapacity OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, IEEE 802.3 Ethernet repeater/hub device (repeater/port operational status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.22 | snmpDot3RptrMgt | LANART-AGENT |
| 1.3.6.1.2.1.22.1 | rptrBasicPackage | LANART-AGENT |
| 1.3.6.1.2.1.22.1.1 | rptrRptrInfo | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.22.1.1.1 | rptrGroupCapacity | SNMP-REPEATER-MIB |