SNMP-HMSA-MIB

All MIBs › SNMP-HMSA-MIB

Category: SNMP Infrastructure and Standards

Description: Defines SNMP HMSA hash-based message authentication objects for cryptographic integrity verification.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SNMP-HMSA-MIB?

SNMP-HMSA-MIB defines objects related to HMAC-based (hash-based) message authentication used for cryptographic integrity verification within an SNMP security context. Rather than exposing operational hardware or performance data, it is a security/protocol-support MIB dealing with authentication parameters for message integrity checking. Its role in status monitoring is limited to the management plane: verifying that message-authentication mechanisms are correctly configured, rather than reporting on device uptime, temperature, or resource load. It is tightly coupled to the SNMPv3 User-based Security Model (USM) and related SNMP framework MIBs (SNMP-FRAMEWORK-MIB, SNMP-USER-BASED-SM-MIB), on which its authentication constructs depend. It would be used wherever SNMP agents need HMAC-based authentication configured and verified, typically in security-conscious network management deployments. Engineers can download the SNMP-HMSA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SNMP-HMSA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Tandem/HP NonStop server systems (Host Resources Subagent: storage/device/CPU/network/printer/disk tables)

Monitoring Examples

No sample objects were provided for this module, so a concrete polling example cannot be given; conceptually an admin would inspect HMAC authentication-parameter objects to confirm the correct hash algorithm and key configuration are active on an SNMP agent. Since no runtime data objects were supplied, no monitoring scenario beyond authentication-configuration verification can be honestly described.

What Can Be Monitored

HMAC authentication algorithm configuration
message-integrity key parameters
SNMPv3 security configuration status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
tandem	1.3.6.1.4.1.169
nonstopsystems	1.3.6.1.4.1.169.3
zhrm	1.3.6.1.4.1.169.3.180
zhrmTableInfo	1.3.6.1.4.1.169.3.180.1
zhrmInfStorTable	1.3.6.1.4.1.169.3.180.1.1
GAU zhrmInfStorEntries	1.3.6.1.4.1.169.3.180.1.1.1	Gauge	read-only	The current number of entries in the hrStorageTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfStorFirstIndex	1.3.6.1.4.1.169.3.180.1.1.2	INTEGER	read-only	The lowest value of hrStorageIndex. VALUE: Integer without leading 0s. DERIVATION: hrStorageTable.
INT zhrmInfStorLastIndex	1.3.6.1.4.1.169.3.180.1.1.3	INTEGER	read-only	The highest value of hrStorageIndex. VALUE: Integer without leading 0s. DERIVATION: hrStorageTable.
STR zhrmInfStorLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.1.4	DisplayString	read-only	The system time at which hrStorageTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfStorLastStableRefresh	1.3.6.1.4.1.169.3.180.1.1.5	DisplayString	read-only	The system time at which hrStorageTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfStorGetCounter	1.3.6.1.4.1.169.3.180.1.1.6	Counter	read-only	The number of Get operations performed on hrStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfStorGetNextCounter	1.3.6.1.4.1.169.3.180.1.1.7	Counter	read-only	The number of GetNext operations performed on hrStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfStorSetCounter	1.3.6.1.4.1.169.3.180.1.1.8	Counter	read-only	The number of Set operations performed on hrStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmInfDevTable	1.3.6.1.4.1.169.3.180.1.2
GAU zhrmInfDevEntries	1.3.6.1.4.1.169.3.180.1.2.1	Gauge	read-only	The current number of entries in the hrDeviceTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfDevFirstIndex	1.3.6.1.4.1.169.3.180.1.2.2	INTEGER	read-only	The lowest value of hrDeviceIndex. VALUE: Integer without leading 0s. DERIVATION: hrDeviceTable.
INT zhrmInfDevLastIndex	1.3.6.1.4.1.169.3.180.1.2.3	INTEGER	read-only	The highest value of hrDeviceIndex. VALUE: Integer without leading 0s. DERIVATION: hrDeviceTable.
STR zhrmInfDevLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.2.4	DisplayString	read-only	The system time at which hrDeviceTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfDevLastStableRefresh	1.3.6.1.4.1.169.3.180.1.2.5	DisplayString	read-only	The system time at which hrDeviceTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfDevGetCounter	1.3.6.1.4.1.169.3.180.1.2.6	Counter	read-only	The number of Get operations performed on hrDeviceTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfDevGetNextCounter	1.3.6.1.4.1.169.3.180.1.2.7	Counter	read-only	The number of GetNext operations performed on hrDeviceTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfDevSetCounter	1.3.6.1.4.1.169.3.180.1.2.8	Counter	read-only	The number of Set operations performed on hrDeviceTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmInfCpuTable	1.3.6.1.4.1.169.3.180.1.3
GAU zhrmInfCpuEntries	1.3.6.1.4.1.169.3.180.1.3.1	Gauge	read-only	The current number of entries in the hrProcessorTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfCpuFirstIndex	1.3.6.1.4.1.169.3.180.1.3.2	INTEGER	read-only	The lowest value of hrDeviceIndex for hrProcessorTable entries. VALUE: Integer without leading 0s. DERIVATION: hrProcessorTable.
INT zhrmInfCpuLastIndex	1.3.6.1.4.1.169.3.180.1.3.3	INTEGER	read-only	The highest value of hrDeviceIndex for hrProcessorTable entries. VALUE: Integer without leading 0s. DERIVATION: hrProcessorTable.
STR zhrmInfCpuLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.3.4	DisplayString	read-only	The system time at which hrProcessorTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfCpuLastStableRefresh	1.3.6.1.4.1.169.3.180.1.3.5	DisplayString	read-only	The system time at which hrProcessorTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfCpuGetCounter	1.3.6.1.4.1.169.3.180.1.3.6	Counter	read-only	The number of Get operations performed on hrProcessorTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfCpuGetNextCounter	1.3.6.1.4.1.169.3.180.1.3.7	Counter	read-only	The number of GetNext operations performed on hrProcessorTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfCpuSetCounter	1.3.6.1.4.1.169.3.180.1.3.8	Counter	read-only	The number of Set operations performed on hrProcessorTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmInfNetTable	1.3.6.1.4.1.169.3.180.1.4
GAU zhrmInfNetEntries	1.3.6.1.4.1.169.3.180.1.4.1	Gauge	read-only	The current number of entries in the hrNetworkTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfNetFirstIndex	1.3.6.1.4.1.169.3.180.1.4.2	INTEGER	read-only	The lowest value of hrDeviceIndex for hrNetworkTable entries. VALUE: Integer without leading 0s. DERIVATION: hrNetworkTable.
INT zhrmInfNetLastIndex	1.3.6.1.4.1.169.3.180.1.4.3	INTEGER	read-only	The highest value of hrDeviceIndex for hrNetworkTable entries. VALUE: Integer without leading 0s. DERIVATION: hrNetworkTable.
STR zhrmInfNetLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.4.4	DisplayString	read-only	The system time at which hrNetworkTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfNetLastStableRefresh	1.3.6.1.4.1.169.3.180.1.4.5	DisplayString	read-only	The system time at which hrNetworkTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfNetGetCounter	1.3.6.1.4.1.169.3.180.1.4.6	Counter	read-only	The number of Get operations performed on hrNetworkTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfNetGetNextCounter	1.3.6.1.4.1.169.3.180.1.4.7	Counter	read-only	The number of GetNext operations performed on hrNetworkTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfNetSetCounter	1.3.6.1.4.1.169.3.180.1.4.8	Counter	read-only	The number of Set operations performed on hrNetworkTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmInfPrnTable	1.3.6.1.4.1.169.3.180.1.5
GAU zhrmInfPrnEntries	1.3.6.1.4.1.169.3.180.1.5.1	Gauge	read-only	The current number of entries in the hrPrinterTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfPrnFirstIndex	1.3.6.1.4.1.169.3.180.1.5.2	INTEGER	read-only	The lowest value of hrDeviceIndex for hrPrinterTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPrinterTable.
INT zhrmInfPrnLastIndex	1.3.6.1.4.1.169.3.180.1.5.3	INTEGER	read-only	The highest value of hrDeviceIndex for hrPrinterTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPrinterTable.
STR zhrmInfPrnLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.5.4	DisplayString	read-only	The system time at which hrPrinterTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfPrnLastStableRefresh	1.3.6.1.4.1.169.3.180.1.5.5	DisplayString	read-only	The system time at which hrPrinterTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfPrnGetCounter	1.3.6.1.4.1.169.3.180.1.5.6	Counter	read-only	The number of Get operations performed on hrPrinterTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfPrnGetNextCounter	1.3.6.1.4.1.169.3.180.1.5.7	Counter	read-only	The number of GetNext operations performed on hrPrinterTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfPrnSetCounter	1.3.6.1.4.1.169.3.180.1.5.8	Counter	read-only	The number of Set operations performed on hrPrinterTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmInfDiskTable	1.3.6.1.4.1.169.3.180.1.6
GAU zhrmInfDiskEntries	1.3.6.1.4.1.169.3.180.1.6.1	Gauge	read-only	The current number of entries in the hrDiskStorageTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfDiskFirstIndex	1.3.6.1.4.1.169.3.180.1.6.2	INTEGER	read-only	The lowest value of hrDeviceIndex for hrDiskStorageTable entries. VALUE: Integer without leading 0s. DERIVATION: hrDiskStorageTable.
INT zhrmInfDiskLastIndex	1.3.6.1.4.1.169.3.180.1.6.3	INTEGER	read-only	The highest value of hrDeviceIndex for hrDiskStorageTable entries. VALUE: Integer without leading 0s. DERIVATION: hrDiskStorageTable.
STR zhrmInfDiskLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.6.4	DisplayString	read-only	The system time at which hrDiskStorageTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfDiskLastStableRefresh	1.3.6.1.4.1.169.3.180.1.6.5	DisplayString	read-only	The system time at which hrDiskStorageTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfDiskGetCounter	1.3.6.1.4.1.169.3.180.1.6.6	Counter	read-only	The number of Get operations performed on hrDiskStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfDiskGetNextCounter	1.3.6.1.4.1.169.3.180.1.6.7	Counter	read-only	The number of GetNext operations performed on hrDiskStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfDiskSetCounter	1.3.6.1.4.1.169.3.180.1.6.8	Counter	read-only	The number of Set operations performed on hrDiskStorageTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmInfPartTable	1.3.6.1.4.1.169.3.180.1.7
GAU zhrmInfPartEntries	1.3.6.1.4.1.169.3.180.1.7.1	Gauge	read-only	The current number of entries in the hrPartitionTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfPartFirstIndex	1.3.6.1.4.1.169.3.180.1.7.2	INTEGER	read-only	The lowest value of hrDeviceIndex for hrPartitionTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPartitionTable.
INT zhrmInfPartLastIndex	1.3.6.1.4.1.169.3.180.1.7.3	INTEGER	read-only	The highest value of hrDeviceIndex for hrPartitionTable entries. VALUE: Integer without leading 0s. DERIVATION: hrPartitionTable.
STR zhrmInfPartLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.7.4	DisplayString	read-only	The system time at which hrPartitionTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfPartLastStableRefresh	1.3.6.1.4.1.169.3.180.1.7.5	DisplayString	read-only	The system time at which hrPartitionTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfPartGetCounter	1.3.6.1.4.1.169.3.180.1.7.6	Counter	read-only	The number of Get operations performed on hrPartitionTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfPartGetNextCounter	1.3.6.1.4.1.169.3.180.1.7.7	Counter	read-only	The number of GetNext operations performed on hrPartitionTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfPartSetCounter	1.3.6.1.4.1.169.3.180.1.7.8	Counter	read-only	The number of Set operations performed on hrPartitionTable objects since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmInfFSTable	1.3.6.1.4.1.169.3.180.1.8
GAU zhrmInfFSEntries	1.3.6.1.4.1.169.3.180.1.8.1	Gauge	read-only	The current number of entries in the hrFSTable. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmInfFSFirstIndex	1.3.6.1.4.1.169.3.180.1.8.2	INTEGER	read-only	The lowest value of hrFSIndex. VALUE: Integer without leading 0s. DERIVATION: hrFSTable.
INT zhrmInfFSLastIndex	1.3.6.1.4.1.169.3.180.1.8.3	INTEGER	read-only	The highest value of hrFSIndex. VALUE: Integer without leading 0s. DERIVATION: hrFSTable.
STR zhrmInfFSLastDynamRefresh	1.3.6.1.4.1.169.3.180.1.8.4	DisplayString	read-only	The system time at which hrFSTable values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmInfFSLastStableRefresh	1.3.6.1.4.1.169.3.180.1.8.5	DisplayString	read-only	The system time at which hrFSTable values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmInfFSGetCounter	1.3.6.1.4.1.169.3.180.1.8.6	Counter	read-only	The number of subagent accesses of hrFSTable objects to handle Get requests since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfFSGetNextCounter	1.3.6.1.4.1.169.3.180.1.8.7	Counter	read-only	The number of subagent accesses of hrFSTable objects to handle GetNext requests since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmInfFSSetCounter	1.3.6.1.4.1.169.3.180.1.8.8	Counter	read-only	The number of subagent accesses of hrFSTable objects to handle Set requests since the subagent was last started. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
zhrmThreshold	1.3.6.1.4.1.169.3.180.2
zhrmThrRAM	1.3.6.1.4.1.169.3.180.2.1
GAU zhrmThrRAMTotal	1.3.6.1.4.1.169.3.180.2.1.1	Gauge	read-only	The total number of megabytes of RAM in the system. VALUE: Integer without leading 0s. DERIVATION: The value of hrMemorySize, expressed as megabytes instead of kilobytes.
GAU zhrmThrRAMUse	1.3.6.1.4.1.169.3.180.2.1.2	Gauge	read-only	The total number of megabytes of RAM currently being used. VALUE: Integer without leading 0s. DERIVATION: Sum of hrStorageUsed values for all RAM entries in the hrStorageTable.
GAU zhrmThrRAMPercentUse	1.3.6.1.4.1.169.3.180.2.1.3	Gauge	read-only	The percent of zhrmThrRAMTotal that is currently being used. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmThrRAMTrapEnable	1.3.6.1.4.1.169.3.180.2.1.4	INTEGER	read-write	When set to 1 (ramTrapsEnabled), a trap (zhrmRAMThreshold) is sent whenever utilization of a RAM storage area reaches or exceeds zhrmThrRAMHighValue or reaches or falls below zhrmThrRAMLowValue. VALUE: One of these values is displayed: ramTrapsDisabled or ramTrapsEnabled. When setting these values, use 0 or 1. DERIVATION: Initialized to 1 (ramTrapsEnabled) at startup, but can be changed from a manager station.
INT zhrmThrRAMHighValue	1.3.6.1.4.1.169.3.180.2.1.5	INTEGER	read-write	The percent utilization of a RAM storage area at or above which zhrmThrRAMTable entries are created and a trap generated if zhrmThrRAMTrapEnable is set to 1. VALUE: A value of 1 through 100, 90 by default. A value of 100 suppresses trap generation (regardless of the value of zhrmThrRAMTrapEnable) and zhrmThrRAMTable entry creation. DERIVATION: Set at startup by using the -h startup parameter. Can be changed by setting the value of this MIB object.
INT zhrmThrRAMLowValue	1.3.6.1.4.1.169.3.180.2.1.6	INTEGER	read-write	The percent utilization of a RAM storage area at or below which a trap is generated if zhrmThrRAMTrapEnable is set to 1. VALUE: A value of 1 through 100, 45 by default. A value of 0 suppresses trap generation, regardless of the value of zhrmThrRAMTrapEnable. DERIVATION: Set at startup by using the -i startup parameter. Can be changed by setting the value of this MIB object.
zhrmThrRAMTable	1.3.6.1.4.1.169.3.180.2.1.7		not-accessible	Entries describing RAM in the hrStorageTable whose usage has reached or exceeded the value of zhrmThrRAMHighValue.
zhrmThrRAMEntry	1.3.6.1.4.1.169.3.180.2.1.7.1		not-accessible	Information about RAM in the hrStorageTable whose usage has reached or exceeded the value of zhrmThrRAMHighValue.
INT zhrmThrRAMIndex	1.3.6.1.4.1.169.3.180.2.1.7.1.1	INTEGER	read-only	An index value having a corresponding value (hrFSStorageIndex) in the hrFSTable. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: The value of hrStorageIndex for the device.
STR zhrmThrRAMDescr	1.3.6.1.4.1.169.3.180.2.1.7.1.2	DisplayString	read-only	Description of the type of storage represented by the entry. VALUE: The number and type of a processor: CPUnn (processor-type) running Dnn.nn. DERIVATION: The value of hrStorageDescr for the device.
INT zhrmThrRAMAllocationUnits	1.3.6.1.4.1.169.3.180.2.1.7.1.3	INTEGER	read-only	The number of bytes allocated by the entry when storage is requested. VALUE: Integer without leading 0s, indicating the page size. DERIVATION: The value of hrStorageAllocationUnits for the device.
INT zhrmThrRAMSize	1.3.6.1.4.1.169.3.180.2.1.7.1.4	INTEGER	read-only	The capacity of the entry, in number of allocation units. VALUE: Integer without leading 0s. If the number exceeds 2, 147, 483, 647, the value returned is -1D. DERIVATION: The value of hrStorageSize for the device.
INT zhrmThrRAMUsed	1.3.6.1.4.1.169.3.180.2.1.7.1.5	INTEGER	read-only	The capacity of the entry, in number of allocation units. VALUE: Integer without leading 0s. DERIVATION: The value of hrStorageUsed for the device.
CTR zhrmThrRAMAllocationFailures	1.3.6.1.4.1.169.3.180.2.1.7.1.6	Counter	read-only	The number of requests for storage by the entry that could not be honored because of insufficient space. VALUE: Integer without leading 0s, indicating the number of page-fault interrupts since the processor was loaded. DERIVATION: The value of hrStorageAllocationFailures for the device.
zhrmThrDisk	1.3.6.1.4.1.169.3.180.2.2
GAU zhrmThrDiskTotal	1.3.6.1.4.1.169.3.180.2.2.1	Gauge	read-only	The total number of megabytes of writeable disk in the system. VALUE: Integer without leading 0s. DERIVATION: Sum of hrStorageSize values for all disk entries in the hrStorageTable, expressed as megabytes.
GAU zhrmThrDiskUse	1.3.6.1.4.1.169.3.180.2.2.2	Gauge	read-only	The total number of megabytes of writeable disk currently being used. VALUE: Integer without leading 0s. DERIVATION: Sum of hrStorageUsed values for all disk entries in the hrStorageTable.
GAU zhrmThrDiskPercentUse	1.3.6.1.4.1.169.3.180.2.2.3	Gauge	read-only	The percent of zhrmThrDiskTotal that is currently being used. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmThrDiskTrapEnable	1.3.6.1.4.1.169.3.180.2.2.4	INTEGER	read-write	When set to 1 (diskTrapsEnabled), a trap (zhrmDiskThreshold) is sent whenever utilization of a writeable disk reaches or exceeds zhrmThrDiskHighValue or reaches or falls below zhrmThrDiskLowValue. VALUE: One of these values is displayed: diskTrapsDisabled or diskTrapsEnabled. When setting these values, use 0 or 1. DERIVATION: Initialized to 1 (diskTrapsEnabled) at startup, but can be changed from a manager station.
INT zhrmThrDiskHighValue	1.3.6.1.4.1.169.3.180.2.2.5	INTEGER	read-write	The percent utilization of a writeable disk at or above which zhrmThrDiskTable entries are created and a trap generated if zhrmThrDiskTrapEnable is set to 1. VALUE: A value of 1 through 100, 90 by default. A value of 100 suppresses trap generation (regardless of the value of zhrmThrDiskTrapEnable) and zhrmThrDiskTable entry creation. DERIVATION: Set at startup by using the -h startup parameter. Can be changed by setting the value of this MIB object.
INT zhrmThrDiskLowValue	1.3.6.1.4.1.169.3.180.2.2.6	INTEGER	read-write	The percent utilization of a writeable disk at or below which a trap is generated if zhrmThrDiskTrapEnable is set to 1. VALUE: A value of 1 through 100, 45 by default. A value of 0 suppresses trap generation, regardless of the value of zhrmThrDiskTrapEnable. DERIVATION: Set at startup by using the -i startup parameter. Can be changed by setting the value of this MIB object.
zhrmThrDiskTable	1.3.6.1.4.1.169.3.180.2.2.7		not-accessible	Entries describing writeable disks in the hrStorageTable whose usage has reached or exceeded the value of zhrmThrDiskHighValue.
zhrmThrDiskEntry	1.3.6.1.4.1.169.3.180.2.2.7.1		not-accessible	Information about writeable disks in the hrStorageTable whose usage has reached or exceeded the value of zhrm ThrDiskHighValue.
INT zhrmThrDiskIndex	1.3.6.1.4.1.169.3.180.2.2.7.1.1	INTEGER	read-only	An index value having a corresponding value (hrFSStorageIndex) in the hrFSTable. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: The value of hrStorageIndex for the device.
STR zhrmThrDiskDescr	1.3.6.1.4.1.169.3.180.2.2.7.1.2	DisplayString	read-only	Description of the type of storage represented by the entry. VALUE: The name and type of the disk: $volume(disk- type). DERIVATION: The value of hrStorageDescr for the device.
INT zhrmThrDiskAllocationUnits	1.3.6.1.4.1.169.3.180.2.2.7.1.3	INTEGER	read-only	The number of bytes allocated by the entry when storage is requested. VALUE: 2048, indicating one page. DERIVATION: The value of hrStorageAllocationUnits for the device.
INT zhrmThrDiskSize	1.3.6.1.4.1.169.3.180.2.2.7.1.4	INTEGER	read-only	The capacity of the entry, in number of allocation units. VALUE: Integer without leading 0s. The number describes the pages formatted. DERIVATION: The value of hrStorageSize for the device.
INT zhrmThrDiskUsed	1.3.6.1.4.1.169.3.180.2.2.7.1.5	INTEGER	read-only	The amount of allocated storage associated with the entry, in allocation units. VALUE: Integer without leading 0s. DERIVATION: The value of hrStorageUsed for the device.
CTR zhrmThrDiskAllocationFailures	1.3.6.1.4.1.169.3.180.2.2.7.1.6	Counter	read-only	The number of requests for storage by the entry that could not be honored because of insufficient space. VALUE: This value is not available, and 0 is returned. DERIVATION: The value of hrStorageAllocationFailures for the device.
zhrmDevUnavail	1.3.6.1.4.1.169.3.180.3
STR zhrmDevUnCurrTime	1.3.6.1.4.1.169.3.180.3.1	DisplayString	read-only	The current system time. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
GAU zhrmDevUnUp	1.3.6.1.4.1.169.3.180.3.2	Gauge	read-only	The total number of devices for which the value of hrDeviceStatus is 2 (running). VALUE: Integer without leading 0s. DERIVATION: Sum of entries in hrDeviceTable having specified status.
GAU zhrmDevUnDown	1.3.6.1.4.1.169.3.180.3.3	Gauge	read-only	The total number of devices for which the value of hrDeviceStatus is 5 (down). VALUE: Integer without leading 0s. DERIVATION: Sum of entries in hrDeviceTable having specified status.
GAU zhrmDevUnOther	1.3.6.1.4.1.169.3.180.3.4	Gauge	read-only	The total number of devices for which the value of hrDeviceStatus is 1 (unknown), 3 (warning), or 4 (testing). VALUE: Integer without leading 0s. DERIVATION: Sum of entries in hrDeviceTable having specified status.
INT zhrmDevUnTrapEnable	1.3.6.1.4.1.169.3.180.3.5	INTEGER	read-write	When set to 1 (devUnTrapsEnabled), a trap (zhrmTrapDeviceStateChange) is sent whenever the value of hrDeviceStatus changes. VALUE: One of these values is displayed: devUnTrapsDisabled or devUnTrapsEnabled. When setting these values, use 0 or 1. DERIVATION: Initialized to 1 (devUnTrapsEnabled) at startup, but can be changed from a manager station.
zhrmDevUnTable	1.3.6.1.4.1.169.3.180.3.6		not-accessible	Entries duplicating entries in the hrDeviceTable for devices that have an hrDeviceStatus value other than 2 (running).
zhrmDevUnEntry	1.3.6.1.4.1.169.3.180.3.6.1		not-accessible	Information duplicating that in the hrDeviceTable for devices that have an hrDeviceStatus value other than 2 (running).
INT zhrmDevUnIndex	1.3.6.1.4.1.169.3.180.3.6.1.1	INTEGER	read-only	Index values that point to entries in the hrProcessorTable, the hrPrinterTable, the hrDiskStorageTable, the hrNetworkTable, and the hrPartitionTable. VALUE: Integers running sequentially from 1. DERIVATION: The value of hrDeviceIndex for qualifying devices.
OID zhrmDevUnType	1.3.6.1.4.1.169.3.180.3.6.1.2	OBJECT IDENTIFIER	read-only	One of the following device types defined by RFC 1514 that characterizes the entry: hrDeviceProcessor, hrDeviceNetwork, hrDevicePrinter, hrDeviceDiskStorage, hrDeviceTape. VALUE: For CPUs: 1.3.6.1.2.1.25.3.1.3. For printers: 1.3.6.1.2.1.25.3.1.5. For disks: 1.3.6.1.2.1.25.3.1.6. For tape drives: 1.3.6.1.2.1.25.3.1.18. For network devices: 1.3.6.1.2.1.25.3.1.4. DERIVATION: The value of hrDeviceType for qualifying devices.
STR zhrmDevUnDescr	1.3.6.1.4.1.169.3.180.3.6.1.3	DisplayString	read-only	Description of the type of device represented by the entry. VALUE: For CPUs: the number and type of a processor: CPUnn (processor-type). For printers: the name of a printer or Spooler collector. Printers have names of the form $printer-id. Spooler collectors, used as pseudo printers, have names of the form [\node-name]$collector-process-name[.#group- name]. For disks: the name and type of the disk: $volume(disk-type). For tapes: $tape-drive-name. For network devices: $network-device. For a loop back device: $NOIOP. DERIVATION: The value of hrDeviceDescr for qualifying devices.
OID zhrmDevUnID	1.3.6.1.4.1.169.3.180.3.6.1.4	OBJECT IDENTIFIER	read-only	An identifier characterizing the entry as a particular device type and subtype. VALUE: The root of the identifier is the same for all entries: 1.3.6.1.4.1.169.3.180. Appended to this value are the type and subtype values. For example, the hrDeviceID for a 4500 (1038-MB formatted capacity per spindle) disk would look like this:1.3.6.1.4.1.169.3.180.3.22. Refer to the 'Guardian Procedure Calls Reference Manual' for a complete list of all device types and subtypes. DERIVATION: The value of hrDeviceID for qualifying devices.
INT zhrmDevUnStatus	1.3.6.1.4.1.169.3.180.3.6.1.5	INTEGER	read-only	The current state the device represented by the entry is in. VALUE: One of these values: unknown, warning, testing down. DERIVATION: The value of hrDeviceStatus for qualifying devices.
CTR zhrmDevUnErrors	1.3.6.1.4.1.169.3.180.3.6.1.6	Counter	read-only	The number of errors detected on the device described by the entry. VALUE: Integer without leading 0s. DERIVATION: The value of hrDeviceErrors for qualifying devices.
zhrmSaProcess	1.3.6.1.4.1.169.3.180.4
STR zhrmSaProcCurrTime	1.3.6.1.4.1.169.3.180.4.1	DisplayString	read-only	The current system time. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmSaProcVersion	1.3.6.1.4.1.169.3.180.4.2	DisplayString	read-only	The version of the Host Resources Subagent. VALUE: T8496Dnn_date -- Tandem Host Resources Subagent. Where Dnn is the product version of the Host Resources Subagent, for example, D21. DERIVATION: Host Resources Subagent.
STR zhrmSaProcName	1.3.6.1.4.1.169.3.180.4.3	DisplayString	read-only	The name of the subagent process. VALUE: $process-name, where process-name is from 1 through 5 alphanumeric characters. DERIVATION: The name specified in the TACL NAME option when the subagent was started.
STR zhrmSaPaid	1.3.6.1.4.1.169.3.180.4.4	DisplayString	read-only	The process access ID (PAID) of the subagent process. VALUE: group-number, user-number. DERIVATION: The group and user numbers associated with the user who started the subagent.
STR zhrmSaPID	1.3.6.1.4.1.169.3.180.4.5	DisplayString	read-only	The process ID (PID) of the subagent process. VALUE: (CPU-number, PIN-number). DERIVATION: Host Resources Subagent.
STR zhrmSaCreatTime	1.3.6.1.4.1.169.3.180.4.6	DisplayString	read-only	The system time at which the subagent process started. VALUE: started month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmSaCpuTime	1.3.6.1.4.1.169.3.180.4.7	DisplayString	read-only	The amount of CPU time used by the subagent since starting. VALUE: HH:MM:SS. DERIVATION: Computed by Host Resources Subagent.
INT zhrmSaPri	1.3.6.1.4.1.169.3.180.4.8	INTEGER	read-write	The priority of the subagent primary and backup processes. VALUE: Integer without leading 0s. DERIVATION: Initially, the value of the -n startup parameter (145 or a user-specified value). After startup, the value can be set from a manager station.
STR zhrmSaHomeTerm	1.3.6.1.4.1.169.3.180.4.9	DisplayString	read-only	The name of the terminal from which the subagent was started. VALUE: \node.$device-name.#subdevice-name. DERIVATION: Guardian procedure PROCESS_GETINFO_.
STR zhrmSaIniFile	1.3.6.1.4.1.169.3.180.4.10	DisplayString	read-only	The name of the subagent initialization file. VALUE: \node.$volume.subvolume.file. DERIVATION: The name specified in the -e startup parameter. If not specified, the name HMSAINI.
GAU zhrmSaHeapInitial	1.3.6.1.4.1.169.3.180.4.11	Gauge	read-only	The number of bytes of memory buffer space allocated at subagent startup. VALUE: Integer without leading 0s. DERIVATION: Internal library routine.
GAU zhrmSaHeapCurrent	1.3.6.1.4.1.169.3.180.4.12	Gauge	read-only	The number of bytes of memory buffer space currently in use by the subagent. VALUE: Integer without leading 0s. DERIVATION: Internal library routine.
CTR zhrmGetPDUsCounter	1.3.6.1.4.1.169.3.180.4.13	Counter	read-only	The number of Get requests received from the NonStop agent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmGetNextPDUsCounter	1.3.6.1.4.1.169.3.180.4.14	Counter	read-only	The number of GetNext requests received from the NonStop agent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmSetPDUsCounter	1.3.6.1.4.1.169.3.180.4.15	Counter	read-only	The number of Set requests received from the NonStop agent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmTrapPDUsCounter	1.3.6.1.4.1.169.3.180.4.16	Counter	read-only	The number of traps generated by the subagent since starting. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmEnableSoftwareGroup	1.3.6.1.4.1.169.3.180.4.17	INTEGER	read-write	A switch that suppresses maintenance of hrSWRun and hrSWRunPerf group objects when set to 0. VALUE: One of these values is displayed: swValuesDisabled or swValuesEnabled. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 1 (swValuesEnabled) unless the -w startup parameter is used. The -w startup parameter sets this value to 0.
INT zhrmSwitchToBackupNow	1.3.6.1.4.1.169.3.180.4.18	INTEGER	read-write	A switch that causes the subagent backup process to take over and a new backup process to be created when set to 1. VALUE: One of these values is displayed: autoProcessPairControl or forceBackupTakeover. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 0 (autoProcessPairControl), but it can be changed from a manager station if the subagent was started using the -b startup parameter.
INT zhrmExamineGuardian	1.3.6.1.4.1.169.3.180.4.19	INTEGER	read-write	determines whether the subagent obtains hrPartition, hrFilesystem, hrFileSystemType, hrSoftwareRun, and hrSoftwareRunPerformance table information from Guardian personality. VALUE: One of these values is displayed: disabled or enabled. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 1 (enabled). The value of this variables depends on the -t startup parameter.
INT zhrmExamineOSS	1.3.6.1.4.1.169.3.180.4.20	INTEGER	read-write	determines whether the subagent obtains hrPartition, hrFilesystem, hrFileSystemType, hrSoftwareRun, and hrSoftwareRunPerformance table information from Open Systems Services personality. VALUE: One of these values is displayed: disabled or enabled. When setting these values, use 0 or 1. DERIVATION: At startup, the subagent sets this value to 0 (disabled), but it can be changed from a manager station if the subagent was started using the -u startup parameter.
zhrmRefresh	1.3.6.1.4.1.169.3.180.5
STR zhrmRefreshCurrTime	1.3.6.1.4.1.169.3.180.5.1	DisplayString	read-only	The current system time. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
INT zhrmDynamRefreshInterval	1.3.6.1.4.1.169.3.180.5.2	INTEGER	read-only	The number of minutes assigned to the -d startup parameter when the subagent was started. VALUE: Integer without leading 0s. DERIVATION: Subagent -d startup parameter.
INT zhrmStableRefreshInterval	1.3.6.1.4.1.169.3.180.5.3	INTEGER	read-only	The number of minutes assigned to the -s startup parameter when the subagent was started. VALUE: Integer without leading 0s. DERIVATION: Subagent -s startup parameter.
STR zhrmLastDynamRefreshTime	1.3.6.1.4.1.169.3.180.5.4	DisplayString	read-only	The system time at which MIB values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS. DERIVATION: Guardian procedure JULIANTIMESTAMP.
STR zhrmLastStableRefreshTime	1.3.6.1.4.1.169.3.180.5.5	DisplayString	read-only	The system time at which MIB values controlled by the -s startup parameter or the zhrmStableRefreshNow object were last refreshed. VALUE: month DD, YYYY HH:MM:SS DERIVATION: Guardian procedure JULIANTIMESTAMP.
CTR zhrmDynamRefreshCnt	1.3.6.1.4.1.169.3.180.5.6	Counter	read-only	The number of times since the subagent was started that MIB values controlled by the -d startup parameter or the zhrmDynamRefreshNow object were refreshed. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
CTR zhrmStableRefreshCnt	1.3.6.1.4.1.169.3.180.5.7	Counter	read-only	The number of times since the subagent was started that MIB values controlled by the -s startup parameter or the zhrmStableRefreshNow object were refreshed. VALUE: Integer without leading 0s. DERIVATION: Computed by Host Resources Subagent.
INT zhrmDynamRefreshNow	1.3.6.1.4.1.169.3.180.5.8	INTEGER	read-write	When set to 1 (forceDynamicRefresh)MIB objects whose values are controlled by the -d startup parameter are refreshed. VALUE: One of these values is displayed: autoDynamicRefresh forceDynamicRefresh. When setting these values, use 0 or 1. DERIVATION: Initialized to 0 (autoDynamicRefresh) at startup, but can be changed from a manager station.
INT zhrmStableRefreshNow	1.3.6.1.4.1.169.3.180.5.9	INTEGER	read-write	When set to 1(forceStableRefresh), MIB objects whose values are controlled by the -s startup parameter are refreshed. VALUE: One of these values is displayed: autoStableRefresh or forceStableRefresh. When setting these values, use 0 or 1. DERIVATION: Initialized to 0 (autoStableRefresh) at startup, but can be changed from a manager station.
zhrmTraps	1.3.6.1.4.1.169.3.180.7
NTF zhrmTrapDeviceStateChange	1.3.6.1.4.1.169.3.180.7.0.1			When zhrmDevUnTrapEnable is set to 1, this trap is generated whenever the status of any device represented in the hrDevice group changes.
NTF zhrmRAMThreshold	1.3.6.1.4.1.169.3.180.7.0.2			When zhrmThrRAMTrapEnable is set to 1, this trap is generated whenever the utilization of any RAM storage area represented in the hrStorage group reaches or exceeds a high threshold (represented by the value of zhrmThrRAMHighValue in the zhrmThreshold group) or reaches or falls below a low threshold (represented by the value of zhrmThrRAMLowValue in the zhrmThreshold group.
NTF zhrmDiskThreshold	1.3.6.1.4.1.169.3.180.7.0.3			When zhrmThrDiskTrapEnable is set to 1, this trap is generated whenever the utilization of any disk represented in the hrStorage group reaches or exceeds a high threshold (represented by the value of zhrmThrDiskLowValue in the zhrmThreshold group) or reaches or falls below a low threshold (represented by the value of zhrmThrDiskLowValue in the zhrmThreshold group).
INT zhrmTrapDeviceStateIndex	1.3.6.1.4.1.169.3.180.7.1	INTEGER	not-accessible	Index value that points to the entry (in the hrProcessorTable, the hrPrinterTable, the hrDiskStorageTable, the hrNetworkTable, or the hrPartitionTable) for the device that the trap describes. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: The value of zhrmDevUnIndex for the device.
STR zhrmTrapDeviceDescr	1.3.6.1.4.1.169.3.180.7.2	DisplayString	not-accessible	A description of the type of device that the trap describes. VALUE: For CPUs: the number and type of a processor: CPUnn (processor-type). For printers: the name of a printer or Spooler collector. Printers have names of the form $printer-id. Spooler collectors, used as pseudo printers, have names of the form [\node-name]$collector-process-name[.#group- name]. For disks: the name and type of the disk: $volume(disk-type). For tapes: $tape-drive-name. For network devices: $network-device. For a loop back device: $NOIOP. DERIVATION: The value of zhrmDevUnDescr for the device.
INT zhrmTrapDeviceStatus	1.3.6.1.4.1.169.3.180.7.3	INTEGER	not-accessible	The current state the device that the trap describes is in. VALUE: One of the following values: unknown, warning, testing, down. DERIVATION: The value of zhrmDevUnStatus for the device.
INT zhrmTrapStorageThrIndex	1.3.6.1.4.1.169.3.180.7.4	INTEGER	not-accessible	Index value that points to the entry in the hrStorageTable for the device that the trap describes. VALUE: Integer, numbered sequentially starting at 1. DERIVATION: For RAM: the value of zhrmThrRAMIndex for the RAM storage area. For disks: the value of zhrmThrDiskIndex for the device.
STR zhrmTrapStorageDescr	1.3.6.1.4.1.169.3.180.7.5	DisplayString	read-only	Description of the type of storage represented by the entry. VALUE: For RAM: number and type of a processor: CPUnn(processor-type) running Dnn.nn. For disks: The name and type of the disk: $volume(disk-type). DERIVATION: For RAM: the value of zhrmThrRAMDescr for the RAM storage area. For disks: the value of zhrmThrDiskDescr for the device.

RFC description

Tandem Host Resources Subagent MIB providing information on storage, devices, CPU, network, printers, and filesystem resources with threshold monitoring.

Start monitoring Tandem/HP NonStop server systems (Host Resources Subagent: storage/device/CPU/network/printer/disk tables) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SNMP-HMSA-MIB

What Is SNMP-HMSA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description