SLE-ISIS-MIB

All MIBs › SLE-ISIS-MIB

Organization: HANASOFT

Last Updated: 2016-03-16

Category: DASAN Networks SLE OLT Management, IP Routing Protocols

Description: Manages Hanasoft SLE OLT IS-IS routing protocol configuration, adjacencies, and link-state database.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLE-ISIS-MIB?

SLE-ISIS-MIB is a vendor MIB from Hanasoft for its SLE OLT (optical line terminal) product line, intended to manage IS-IS routing protocol configuration, adjacencies, and link-state database information; notably, its module description text ('This MIB contains information about RIP version 2') appears mismatched or inherited from another module, suggesting caution about the exact scope without direct source inspection. Assuming the short description is accurate, it would expose routing-category data covering IS-IS adjacency state, interface configuration, and link-state database entries. Its monitoring role would center on software/protocol status -- confirming IS-IS adjacencies remain up and the link-state database is synchronized, which reveals routing instability or topology changes in the access network. It would depend conceptually on the IS-IS protocol standard (ISO 10589) it models, similar to how a standards MIB would, even though it is vendor-specific. It is typically deployed on Hanasoft SLE OLT platforms used in fiber access (GPON/EPON) networks requiring IS-IS-based routing between access and aggregation layers. Network engineers evaluating or troubleshooting this functionality can download the SLE-ISIS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-ISIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hanasoft SLE OLT (optical line terminal) platforms

Monitoring Examples

No sample object names were provided for this module, so specific table or object names cannot be cited with confidence, and the module_desc text on file appears to describe a different protocol (RIP v2), which further limits certainty about this module's exact object set. In general, an administrator would expect to poll IS-IS adjacency and link-state database objects to confirm neighbor adjacencies remain established, which would reveal a routing adjacency flap or link-state database desynchronization on the OLT.

What Can Be Monitored

IS-IS adjacency state
link-state database entries
IS-IS interface configuration

Imported Objects

From DASAN-SMI

sleMgmt

OBJECT-IDENTITY

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

OIDs

OID symbolic	OID numeric	Type	Access	Description
sleISIS	1.3.6.1.4.1.6296.101.56			This MIB contains information about RIP version 2.
sleISISBase	1.3.6.1.4.1.6296.101.56.1
sleISISBaseControl	1.3.6.1.4.1.6296.101.56.1.2
sleISISBaseInfo	1.3.6.1.4.1.6296.101.56.1.1
sleISISBaseNotification	1.3.6.1.4.1.6296.101.56.1.3
OCT sleISISControlClearIfName	1.3.6.1.4.1.6296.101.56.1.2.10	OCTET STRING	read-write	Interface Name of ISIS for clear
INT sleISISControlClearRouteMode	1.3.6.1.4.1.6296.101.56.1.2.12	INTEGER	read-write	The route mode to clear. Redistribution: Clear ISIS local redistribution routes. all: Clear all of the ISIS routing table.s
OCT sleISISControlClearRouteTag	1.3.6.1.4.1.6296.101.56.1.2.11	OCTET STRING	read-write	Routing area tag
OCT sleISISControlClearSystemId	1.3.6.1.4.1.6296.101.56.1.2.9	OCTET STRING	read-write	System-ID Neighbor system ID in XXXX. XXXX. XXXX format.
SLE sleISISControlReqResult	1.3.6.1.4.1.6296.101.56.1.2.5	SleControlRequestResultType	read-only	The result of the last user command
INT sleISISControlRequest	1.3.6.1.4.1.6296.101.56.1.2.1	INTEGER	read-write	The request of a user command
INT sleISISControlRestartHelper	1.3.6.1.4.1.6296.101.56.1.2.7	INTEGER	read-write	Description.
I32 sleISISControlRestartPeriod	1.3.6.1.4.1.6296.101.56.1.2.8	Integer32	read-write	ISIS Graceful-restart period.
INT sleISISControlRestartSuppressAdjacency	1.3.6.1.4.1.6296.101.56.1.2.6	INTEGER	read-write	Description.
SLE sleISISControlStatus	1.3.6.1.4.1.6296.101.56.1.2.2	SleControlStatusType	read-only	The request of a user command
G32 sleISISControlTimer	1.3.6.1.4.1.6296.101.56.1.2.3	Gauge32	read-write	The maximum time for the manager for a long running user command
TIK sleISISControlTimeStamp	1.3.6.1.4.1.6296.101.56.1.2.4	TimeTicks	read-only	The time stamp of the last command(end of command)
sleISISDatabase	1.3.6.1.4.1.6296.101.56.7
I32 sleISISDatabaseAtt	1.3.6.1.4.1.6296.101.56.7.1.1.7	Integer32	read-only	ISIS database att
sleISISDatabaseDetail	1.3.6.1.4.1.6296.101.56.8
OCT sleISISDatabaseDetailDescription	1.3.6.1.4.1.6296.101.56.8.1.1.8	OCTET STRING	read-only	ISIS database detail description.
sleISISDatabaseDetailEntry	1.3.6.1.4.1.6296.101.56.8.1.1		not-accessible	Description.
I32 sleISISDatabaseDetailIndex	1.3.6.1.4.1.6296.101.56.8.1.1.5	Integer32	read-only	ISIS database detail index.
INT sleISISDatabaseDetailLevel	1.3.6.1.4.1.6296.101.56.8.1.1.2	INTEGER	read-only	ISIS database level
OCT sleISISDatabaseDetailLspId	1.3.6.1.4.1.6296.101.56.8.1.1.3	OCTET STRING	read-only	ISIS database lsp id
OCT sleISISDatabaseDetailPad	1.3.6.1.4.1.6296.101.56.8.1.1.6	OCTET STRING	read-only	ISIS database lsp detail pad.
sleISISDatabaseDetailTable	1.3.6.1.4.1.6296.101.56.8.1		not-accessible	Description.
OCT sleISISDatabaseDetailTag	1.3.6.1.4.1.6296.101.56.8.1.1.1	OCTET STRING	read-only	ISIS database tag
INT sleISISDatabaseDetailType	1.3.6.1.4.1.6296.101.56.8.1.1.4	INTEGER	read-only	ISIS database lsp detail type.
I32 sleISISDatabaseDetailValue	1.3.6.1.4.1.6296.101.56.8.1.1.7	Integer32	read-only	ISIS database lsp detail vlaue.
sleISISDatabaseEntry	1.3.6.1.4.1.6296.101.56.7.1.1		not-accessible	Description.
I32 sleISISDatabaseLevel	1.3.6.1.4.1.6296.101.56.7.1.1.2	Integer32	read-only	ISIS database level index
OCT sleISISDatabaseLspChecksum	1.3.6.1.4.1.6296.101.56.7.1.1.5	OCTET STRING	read-only	ISIS database lsp Checksum
OCT sleISISDatabaseLspHoldtime	1.3.6.1.4.1.6296.101.56.7.1.1.6	OCTET STRING	read-only	ISIS database lsp Holdtime
OCT sleISISDatabaseLspId	1.3.6.1.4.1.6296.101.56.7.1.1.3	OCTET STRING	read-only	ISIS database lsp ID
OCT sleISISDatabaseLspSeqNum	1.3.6.1.4.1.6296.101.56.7.1.1.4	OCTET STRING	read-only	ISIS database lsp sequence number
I32 sleISISDatabaseOl	1.3.6.1.4.1.6296.101.56.7.1.1.9	Integer32	read-only	ISIS database overload
I32 sleISISDatabaseP	1.3.6.1.4.1.6296.101.56.7.1.1.8	Integer32	read-only	ISIS database partition
sleISISDatabaseTable	1.3.6.1.4.1.6296.101.56.7.1		not-accessible	Description.
OCT sleISISDatabaseTag	1.3.6.1.4.1.6296.101.56.7.1.1.1	OCTET STRING	read-only	ISIS database tag ID
sleISISGroup	1.3.6.1.4.1.6296.101.56.9			Description.
sleISISIf	1.3.6.1.4.1.6296.101.56.3
OCT sleISISIfAuthKeyChainLevle1	1.3.6.1.4.1.6296.101.56.3.1.1.10	OCTET STRING	read-only	Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
OCT sleISISIfAuthKeyChainLevle2	1.3.6.1.4.1.6296.101.56.3.1.1.11	OCTET STRING	read-only	Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
INT sleISISIfAuthModeMd5Levle1	1.3.6.1.4.1.6296.101.56.3.1.1.6	INTEGER	read-only	Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
INT sleISISIfAuthModeMd5Levle2	1.3.6.1.4.1.6296.101.56.3.1.1.7	INTEGER	read-only	Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
INT sleISISIfAuthModeTextLevle1	1.3.6.1.4.1.6296.101.56.3.1.1.8	INTEGER	read-only	Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
INT sleISISIfAuthModeTextLevle2	1.3.6.1.4.1.6296.101.56.3.1.1.9	INTEGER	read-only	Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
INT sleISISIfAuthSendLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.4	INTEGER	read-only	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfAuthSendLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.5	INTEGER	read-only	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfBfd	1.3.6.1.4.1.6296.101.56.3.1.1.12	INTEGER	read-only	Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
INT sleISISIfBfdDisable	1.3.6.1.4.1.6296.101.56.3.1.1.13	INTEGER	read-only	Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
INT sleISISIfCircuitType	1.3.6.1.4.1.6296.101.56.3.1.1.14	INTEGER	read-only	Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2
sleISISIfControl	1.3.6.1.4.1.6296.101.56.3.2
OCT sleISISIfControlAuthKeyChainLevle1	1.3.6.1.4.1.6296.101.56.3.2.15	OCTET STRING	read-write	Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
OCT sleISISIfControlAuthKeyChainLevle2	1.3.6.1.4.1.6296.101.56.3.2.16	OCTET STRING	read-write	Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string
INT sleISISIfControlAuthModeMd5Levle1	1.3.6.1.4.1.6296.101.56.3.2.11	INTEGER	read-write	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfControlAuthModeMd5Levle2	1.3.6.1.4.1.6296.101.56.3.2.12	INTEGER	read-write	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfControlAuthModeTextLevle1	1.3.6.1.4.1.6296.101.56.3.2.13	INTEGER	read-write	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfControlAuthModeTextLevle2	1.3.6.1.4.1.6296.101.56.3.2.14	INTEGER	read-write	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfControlAuthSendLevel1	1.3.6.1.4.1.6296.101.56.3.2.9	INTEGER	read-write	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfControlAuthSendLevel2	1.3.6.1.4.1.6296.101.56.3.2.10	INTEGER	read-write	Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
INT sleISISIfControlBfd	1.3.6.1.4.1.6296.101.56.3.2.17	INTEGER	read-write	Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
INT sleISISIfControlBfdDisable	1.3.6.1.4.1.6296.101.56.3.2.18	INTEGER	read-write	Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
INT sleISISIfControlCircuitType	1.3.6.1.4.1.6296.101.56.3.2.19	INTEGER	read-write	Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2
I32 sleISISIfControlCsnpIntervalLevel1	1.3.6.1.4.1.6296.101.56.3.2.20	Integer32	read-write	Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10
I32 sleISISIfControlCsnpIntervalLevel2	1.3.6.1.4.1.6296.101.56.3.2.21	Integer32	read-write	Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10
I32 sleISISIfControlHelloIntervalLevel1	1.3.6.1.4.1.6296.101.56.3.2.23	Integer32	read-write	Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10
I32 sleISISIfControlHelloIntervalLevel2	1.3.6.1.4.1.6296.101.56.3.2.24	Integer32	read-write	Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10
INT sleISISIfControlHelloIntervalMinimalLevel1	1.3.6.1.4.1.6296.101.56.3.2.25	INTEGER	read-write	Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
INT sleISISIfControlHelloIntervalMinimalLevel2	1.3.6.1.4.1.6296.101.56.3.2.26	INTEGER	read-write	Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
I32 sleISISIfControlHelloMultiplierLevel1	1.3.6.1.4.1.6296.101.56.3.2.27	Integer32	read-write	Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3
I32 sleISISIfControlHelloMultiplierLevel2	1.3.6.1.4.1.6296.101.56.3.2.28	Integer32	read-write	Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3
INT sleISISIfControlHelloPadding	1.3.6.1.4.1.6296.101.56.3.2.22	INTEGER	read-write	Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable
I32 sleISISIfControlIndex	1.3.6.1.4.1.6296.101.56.3.2.6	Integer32	read-write	vlan interface index for isis protocol.
INT sleISISIfControlIpRouter	1.3.6.1.4.1.6296.101.56.3.2.8	INTEGER	read-write	Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable
U32 sleISISIfControlLspInterval	1.3.6.1.4.1.6296.101.56.3.2.29	Unsigned32	read-write	Use this command to set the Link State Packet (LSP) transmission interval. range : 1 ? 4294967295 default : 33
U32 sleISISIfControlMeshGroup	1.3.6.1.4.1.6296.101.56.3.2.30	Unsigned32	read-write	Use this command to set Mesh Group ID on the current interface. range : 1 ? 4294967295 disable : 0
I32 sleISISIfControlMetricLevel1	1.3.6.1.4.1.6296.101.56.3.2.31	Integer32	read-write	Use this command to set default metric for the interface. range : 1 ? 63 default : 10
I32 sleISISIfControlMetricLevel2	1.3.6.1.4.1.6296.101.56.3.2.32	Integer32	read-write	Use this command to set default metric for the interface. range : 1 ? 63 default : 10
INT sleISISIfControlMplsLdpIgpSync	1.3.6.1.4.1.6296.101.56.3.2.7	INTEGER	read-write	Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2
INT sleISISIfControlNetwork	1.3.6.1.4.1.6296.101.56.3.2.33	INTEGER	read-write	Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point
I32 sleISISIfControlPriorityLevel1	1.3.6.1.4.1.6296.101.56.3.2.34	Integer32	read-write	Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64
I32 sleISISIfControlPriorityLevel2	1.3.6.1.4.1.6296.101.56.3.2.35	Integer32	read-write	Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64
SLE sleISISIfControlReqResult	1.3.6.1.4.1.6296.101.56.3.2.5	SleControlRequestResultType	read-write	Description.
SLE sleISISIfControlRequest	1.3.6.1.4.1.6296.101.56.3.2.1	SleControlRequestResultType	read-write	Description.
I32 sleISISIfControlRestartHelloIntervalLevel1	1.3.6.1.4.1.6296.101.56.3.2.36	Integer32	read-write	Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3
I32 sleISISIfControlRestartHelloIntervalLevel2	1.3.6.1.4.1.6296.101.56.3.2.37	Integer32	read-write	Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3
I32 sleISISIfControlRetransmitInterval	1.3.6.1.4.1.6296.101.56.3.2.38	Integer32	read-write	Use this command to set LSP retransmission interval. range : 0 ? 65535 default : 5
SLE sleISISIfControlStatus	1.3.6.1.4.1.6296.101.56.3.2.2	SleControlStatusType	read-write	Description.
G32 sleISISIfControlTimer	1.3.6.1.4.1.6296.101.56.3.2.3	Gauge32	read-write	Description.
TIK sleISISIfControlTimeStamp	1.3.6.1.4.1.6296.101.56.3.2.4	TimeTicks	read-write	Description.
I32 sleISISIfControlWideMetricLevel1	1.3.6.1.4.1.6296.101.56.3.2.39	Integer32	read-write	Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
I32 sleISISIfControlWideMetricLevel2	1.3.6.1.4.1.6296.101.56.3.2.40	Integer32	read-write	Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
I32 sleISISIfCsnpIntervalLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.15	Integer32	read-only	Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10
I32 sleISISIfCsnpIntervalLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.16	Integer32	read-only	Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10
I32 sleISISIfHelloIntervalLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.18	Integer32	read-only	Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10
I32 sleISISIfHelloIntervalLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.19	Integer32	read-only	Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10
INT sleISISIfHelloIntervalMinimalLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.20	INTEGER	read-only	Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
INT sleISISIfHelloIntervalMinimalLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.21	INTEGER	read-only	Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
I32 sleISISIfHelloMultiplierLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.22	Integer32	read-only	Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3
I32 sleISISIfHelloMultiplierLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.23	Integer32	read-only	Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3
INT sleISISIfHelloPadding	1.3.6.1.4.1.6296.101.56.3.1.1.17	INTEGER	read-only	Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable
I32 sleISISIfIndex	1.3.6.1.4.1.6296.101.56.3.1.1.1	Integer32	read-only	vlan interface index for isis protocol.
INT sleISISIfIpRouter	1.3.6.1.4.1.6296.101.56.3.1.1.3	INTEGER	read-only	Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable
U32 sleISISIfLspInterval	1.3.6.1.4.1.6296.101.56.3.1.1.24	Unsigned32	read-only	Use this command to set the Link State Packet (LSP) transmission interval. range : 1 - 4294967295 default : 33
U32 sleISISIfMeshGroup	1.3.6.1.4.1.6296.101.56.3.1.1.25	Unsigned32	read-only	Use this command to set Mesh Group ID on the current interface. range : 1 - 4294967295 disable : 0
I32 sleISISIfMetricLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.26	Integer32	read-only	Use this command to set default metric for the interface. range : 1 - 63 default : 10
I32 sleISISIfMetricLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.27	Integer32	read-only	Use this command to set default metric for the interface. range : 1 - 63 default : 10
INT sleISISIfMplsLdpIgpSync	1.3.6.1.4.1.6296.101.56.3.1.1.2	INTEGER	read-only	Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2
INT sleISISIfNetwork	1.3.6.1.4.1.6296.101.56.3.1.1.28	INTEGER	read-only	Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point
I32 sleISISIfPriorityLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.29	Integer32	read-only	Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64
I32 sleISISIfPriorityLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.30	Integer32	read-only	Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64
I32 sleISISIfRestartHelloIntervalLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.31	Integer32	read-only	Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3
I32 sleISISIfRestartHelloIntervalLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.32	Integer32	read-only	Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3
I32 sleISISIfRetransmitInterval	1.3.6.1.4.1.6296.101.56.3.1.1.33	Integer32	read-only	Use this command to set LSP retransmission interval. range : 0 - 65535 default : 5
I32 sleIsisIfStatusCircuitL1ActiveAdjacencies	1.3.6.1.4.1.6296.101.56.3.4.1.15	Integer32	read-only	The active adjacencies of level1
I32 sleIsisIfStatusCircuitL1CircuitId	1.3.6.1.4.1.6296.101.56.3.4.1.14	Integer32	read-only	The circuit id of level1
I32 sleIsisIfStatusCircuitL1LscpMtu	1.3.6.1.4.1.6296.101.56.3.4.1.16	Integer32	read-only	The MTU of level1
I32 sleIsisIfStatusCircuitL1Metric	1.3.6.1.4.1.6296.101.56.3.4.1.11	Integer32	read-only	The narrow metric of level1
I32 sleIsisIfStatusCircuitL1Priority	1.3.6.1.4.1.6296.101.56.3.4.1.13	Integer32	read-only	The priority of level1
I32 sleIsisIfStatusCircuitL1WideMetric	1.3.6.1.4.1.6296.101.56.3.4.1.12	Integer32	read-only	The wide metric of level1
I32 sleIsisIfStatusCircuitL2ActiveAdjacencies	1.3.6.1.4.1.6296.101.56.3.4.1.21	Integer32	read-only	The active adjacencies of level2
I32 sleIsisIfStatusCircuitL2CircuitId	1.3.6.1.4.1.6296.101.56.3.4.1.20	Integer32	read-only	The circuit id of level2
I32 sleIsisIfStatusCircuitL2LscpMtu	1.3.6.1.4.1.6296.101.56.3.4.1.22	Integer32	read-only	The MTU of level2
I32 sleIsisIfStatusCircuitL2Metric	1.3.6.1.4.1.6296.101.56.3.4.1.17	Integer32	read-only	The narrow metric of level2
I32 sleIsisIfStatusCircuitL2Priority	1.3.6.1.4.1.6296.101.56.3.4.1.19	Integer32	read-only	The priority of level2
I32 sleIsisIfStatusCircuitL2WideMetric	1.3.6.1.4.1.6296.101.56.3.4.1.18	Integer32	read-only	The wide metric of level2
INT sleIsisIfStatusCircuitType	1.3.6.1.4.1.6296.101.56.3.4.1.5	INTEGER	read-only	The circuit type
sleISISIfStatusEntry	1.3.6.1.4.1.6296.101.56.3.4.1		not-accessible	Description.
I32 sleIsisIfStatusExtendedLocalCircuitId	1.3.6.1.4.1.6296.101.56.3.4.1.7	Integer32	read-only	The extended local circuit id
I32 sleISISIfStatusIfIndex	1.3.6.1.4.1.6296.101.56.3.4.1.1	Integer32	read-only	vlan interface index for isis protocol.
INT sleIsisIfStatusIfStatus	1.3.6.1.4.1.6296.101.56.3.4.1.2	INTEGER	read-only	The interface up/down status
OCT sleIsisIfStatusIsisTag	1.3.6.1.4.1.6296.101.56.3.4.1.3	OCTET STRING	read-only	The ISIS tag
OCT sleIsisIfStatusL1HelloTimerBroadcast	1.3.6.1.4.1.6296.101.56.3.4.1.23	OCTET STRING	read-only	The Level1 hello timer of broadcast
OCT sleIsisIfStatusL1HellotimerPoint2Point	1.3.6.1.4.1.6296.101.56.3.4.1.25	OCTET STRING	read-only	The Level1 hello timer of porint to point
OCT sleIsisIfStatusL2HelloTimerBroadcast	1.3.6.1.4.1.6296.101.56.3.4.1.24	OCTET STRING	read-only	The Level2 hello timer of broadcast
OCT sleIsisIfStatusL2HellotimerPoint2Point	1.3.6.1.4.1.6296.101.56.3.4.1.26	OCTET STRING	read-only	The Level2 hello timer of porint to point
I32 sleIsisIfStatusLdpSyncHoldTimer	1.3.6.1.4.1.6296.101.56.3.4.1.9	Integer32	read-only	The LDP sync hold timer(sec)
I32 sleIsisIfStatusLdpSyncRemainingTime	1.3.6.1.4.1.6296.101.56.3.4.1.10	Integer32	read-only	The LDP sync remaining time(sec)
I32 sleIsisIfStatusLocalCircuitId	1.3.6.1.4.1.6296.101.56.3.4.1.6	Integer32	read-only	The local circuit id
OCT sleIsisIfStatusLocalSnpa	1.3.6.1.4.1.6296.101.56.3.4.1.8	OCTET STRING	read-only	The local SNPA mac address
INT sleIsisIfStatusNetworkType	1.3.6.1.4.1.6296.101.56.3.4.1.4	INTEGER	read-only	The network type
sleISISIfStatusTable	1.3.6.1.4.1.6296.101.56.3.4		not-accessible	Description.
I32 sleISISIfWideMetricLevel1	1.3.6.1.4.1.6296.101.56.3.1.1.34	Integer32	read-only	Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
I32 sleISISIfWideMetricLevel2	1.3.6.1.4.1.6296.101.56.3.1.1.35	Integer32	read-write	Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10
sleISISInstIf	1.3.6.1.4.1.6296.101.56.4
sleISISInstIfControl	1.3.6.1.4.1.6296.101.56.4.2
I32 sleISISInstIfControlInstanceId	1.3.6.1.4.1.6296.101.56.4.2.6	Integer32	read-write	The ISIS instance index
I32 sleISISInstIfControlInterfaceId	1.3.6.1.4.1.6296.101.56.4.2.7	Integer32	read-write	The ISIS interface index ( 0 means all interface)
SLE sleISISInstIfControlReqResult	1.3.6.1.4.1.6296.101.56.4.2.5	SleControlRequestResultType	read-only	Description.
INT sleISISInstIfControlRequest	1.3.6.1.4.1.6296.101.56.4.2.1	INTEGER	read-write	The request of a user command
SLE sleISISInstIfControlStatus	1.3.6.1.4.1.6296.101.56.4.2.2	SleControlStatusType	read-only	Description.
G32 sleISISInstIfControlTimer	1.3.6.1.4.1.6296.101.56.4.2.3	Gauge32	read-write	Description.
TIK sleISISInstIfControlTimeStamp	1.3.6.1.4.1.6296.101.56.4.2.4	TimeTicks	read-only	Description.
sleISISInstIfEntry	1.3.6.1.4.1.6296.101.56.4.1.1		not-accessible	Description.
I32 sleISISInstIfInstanceId	1.3.6.1.4.1.6296.101.56.4.1.1.1	Integer32	read-only	The ISIS instance index
I32 sleISISInstIfInterfaceId	1.3.6.1.4.1.6296.101.56.4.1.1.2	Integer32	read-only	The ISIS interface index
sleISISInstIfTable	1.3.6.1.4.1.6296.101.56.4.1		not-accessible	Description.
sleISISInstRedistIsisProtocol	1.3.6.1.4.1.6296.101.56.5.2
sleISISInstRedistIsisProtocolControl	1.3.6.1.4.1.6296.101.56.5.2.2
I32 sleISISInstRedistIsisProtocolControlInstanceId	1.3.6.1.4.1.6296.101.56.5.2.2.6	Integer32	read-write	The ISIS instance index
OCT sleISISInstRedistIsisProtocolControlLv1Lv2DistributeList	1.3.6.1.4.1.6296.101.56.5.2.2.7	OCTET STRING	read-write	The ISIS interface index ( 0 means all interface)
OCT sleISISInstRedistIsisProtocolControlLv2Lv1DistributeList	1.3.6.1.4.1.6296.101.56.5.2.2.8	OCTET STRING	read-write	The ISIS interface index ( 0 means all interface)
SLE sleISISInstRedistIsisProtocolControlReqResult	1.3.6.1.4.1.6296.101.56.5.2.2.5	SleControlRequestResultType	read-only	Description.
INT sleISISInstRedistIsisProtocolControlRequest	1.3.6.1.4.1.6296.101.56.5.2.2.1	INTEGER	read-write	The request of a user command
SLE sleISISInstRedistIsisProtocolControlStatus	1.3.6.1.4.1.6296.101.56.5.2.2.2	SleControlStatusType	read-only	Description.
G32 sleISISInstRedistIsisProtocolControlTimer	1.3.6.1.4.1.6296.101.56.5.2.2.3	Gauge32	read-write	Description.
TIK sleISISInstRedistIsisProtocolControlTimeStamp	1.3.6.1.4.1.6296.101.56.5.2.2.4	TimeTicks	read-only	Description.
sleISISInstRedistIsisProtocolEntry	1.3.6.1.4.1.6296.101.56.5.2.1.1		not-accessible	Description.
I32 sleISISInstRedistIsisProtocolInstanceId	1.3.6.1.4.1.6296.101.56.5.2.1.1.1	Integer32	read-only	The ISIS instance index
INT sleISISInstRedistIsisProtocolInterAreaFromLv1ToLv2	1.3.6.1.4.1.6296.101.56.5.2.1.1.2	INTEGER	read-only	The ISIS instance index
INT sleISISInstRedistIsisProtocolInterAreaFromLv2ToLv1	1.3.6.1.4.1.6296.101.56.5.2.1.1.4	INTEGER	read-only	The passive interface configuration.
OCT sleISISInstRedistIsisProtocolLv1Lv2DistributeList	1.3.6.1.4.1.6296.101.56.5.2.1.1.3	OCTET STRING	read-only	The ISIS interface index
OCT sleISISInstRedistIsisProtocolLv2Lv1DistributeList	1.3.6.1.4.1.6296.101.56.5.2.1.1.5	OCTET STRING	read-only	The passive interface configuration.
sleISISInstRedistIsisProtocolTable	1.3.6.1.4.1.6296.101.56.5.2.1		not-accessible	Description.
sleISISInstRedistProtocol	1.3.6.1.4.1.6296.101.56.5.1
sleISISInstRedistProtocolControl	1.3.6.1.4.1.6296.101.56.5.1.2
INT sleISISInstRedistProtocolControlId	1.3.6.1.4.1.6296.101.56.5.1.2.7	INTEGER	read-write	The ISIS interface index ( 0 means all interface)
I32 sleISISInstRedistProtocolControlInstanceId	1.3.6.1.4.1.6296.101.56.5.1.2.6	Integer32	read-write	The ISIS instance index
G32 sleISISInstRedistProtocolControlMetric	1.3.6.1.4.1.6296.101.56.5.1.2.8	Gauge32	read-write	The ISIS interface index ( 0 means all interface)
INT sleISISInstRedistProtocolControlMetricType	1.3.6.1.4.1.6296.101.56.5.1.2.9	INTEGER	read-write	The ISIS interface index ( 0 means all interface)
SLE sleISISInstRedistProtocolControlReqResult	1.3.6.1.4.1.6296.101.56.5.1.2.5	SleControlRequestResultType	read-only	Description.
INT sleISISInstRedistProtocolControlRequest	1.3.6.1.4.1.6296.101.56.5.1.2.1	INTEGER	read-write	The request of a user command
INT sleISISInstRedistProtocolControlRouteLevelType	1.3.6.1.4.1.6296.101.56.5.1.2.10	INTEGER	read-write	The ISIS interface index ( 0 means all interface)
OCT sleISISInstRedistProtocolControlRouteMapName	1.3.6.1.4.1.6296.101.56.5.1.2.11	OCTET STRING	read-write	The ISIS interface index ( 0 means all interface)
SLE sleISISInstRedistProtocolControlStatus	1.3.6.1.4.1.6296.101.56.5.1.2.2	SleControlStatusType	read-only	Description.
G32 sleISISInstRedistProtocolControlTimer	1.3.6.1.4.1.6296.101.56.5.1.2.3	Gauge32	read-write	Description.
TIK sleISISInstRedistProtocolControlTimeStamp	1.3.6.1.4.1.6296.101.56.5.1.2.4	TimeTicks	read-only	Description.
sleISISInstRedistProtocolEntry	1.3.6.1.4.1.6296.101.56.5.1.1.1		not-accessible	Description.
INT sleISISInstRedistProtocolId	1.3.6.1.4.1.6296.101.56.5.1.1.1.2	INTEGER	read-only	The ISIS instance index
I32 sleISISInstRedistProtocolInstanceId	1.3.6.1.4.1.6296.101.56.5.1.1.1.1	Integer32	read-only	The ISIS instance index
G32 sleISISInstRedistProtocolMetric	1.3.6.1.4.1.6296.101.56.5.1.1.1.3	Gauge32	read-only	The ISIS interface index
INT sleISISInstRedistProtocolMetricType	1.3.6.1.4.1.6296.101.56.5.1.1.1.4	INTEGER	read-only	The passive interface configuration.
INT sleISISInstRedistProtocolRouteLevelType	1.3.6.1.4.1.6296.101.56.5.1.1.1.5	INTEGER	read-only	The passive interface configuration.
OCT sleISISInstRedistProtocolRouteMapName	1.3.6.1.4.1.6296.101.56.5.1.1.1.6	OCTET STRING	read-only	The passive interface configuration.
sleISISInstRedistProtocolTable	1.3.6.1.4.1.6296.101.56.5.1.1		not-accessible	Description.
sleISISInstRedistribute	1.3.6.1.4.1.6296.101.56.5
INT sleISISPassiveInterface	1.3.6.1.4.1.6296.101.56.4.1.1.3	INTEGER	read-only	The passive interface configuration.
sleISISProc	1.3.6.1.4.1.6296.101.56.2
INT sleISISProcAreaPassAuthSnp	1.3.6.1.4.1.6296.101.56.2.1.1.1.37	INTEGER	read-only	SNP Authentication of ISIS Routing Area
OCT sleISISProcAreaPassVal	1.3.6.1.4.1.6296.101.56.2.1.1.1.36	OCTET STRING	read-only	ISIS Routing Area password
OCT sleISISProcAuthenKeyChainL1	1.3.6.1.4.1.6296.101.56.2.1.1.1.44	OCTET STRING	read-only	The authentication key-chain with level1
OCT sleISISProcAuthenKeyChainL1L2	1.3.6.1.4.1.6296.101.56.2.1.1.1.46	OCTET STRING	read-only	The authentication key-chain with level1 and level2.
OCT sleISISProcAuthenKeyChainL2	1.3.6.1.4.1.6296.101.56.2.1.1.1.45	OCTET STRING	read-only	The authentication key-chain with level2.
INT sleISISProcAuthMode	1.3.6.1.4.1.6296.101.56.2.1.1.1.30	INTEGER	read-only	Authentication mode of ISIS Process
INT sleISISProcAuthModeLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.31	INTEGER	read-only	Authentication level of ISIS Process
INT sleISISProcAuthSendOnly	1.3.6.1.4.1.6296.101.56.2.1.1.1.32	INTEGER	read-only	Authentication send-only
INT sleISISProcAuthSendOnlyLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.33	INTEGER	read-only	Level of Authentication send-only
INT sleISISProcBfdAllInterface	1.3.6.1.4.1.6296.101.56.2.1.1.1.3	INTEGER	read-only	Enable BFD on all interfaces
INT sleISISProcCapCspf	1.3.6.1.4.1.6296.101.56.2.1.1.1.4	INTEGER	read-only	Enable Constrained Shortest Path First
OCT sleISISProcControlAuthenkeyChain	1.3.6.1.4.1.6296.101.56.2.1.2.48	OCTET STRING	read-write	The authentication key-chain word.
INT sleISISProcControlAuthenkeyChainLevel	1.3.6.1.4.1.6296.101.56.2.1.2.49	INTEGER	read-write	The authentication key-chain level.
INT sleISISProcControlWaitTimerLevel	1.3.6.1.4.1.6296.101.56.2.1.2.47	INTEGER	read-write	Enable incremental SPF for ISIS proces
INT sleISISProcControlWaitTimerVal	1.3.6.1.4.1.6296.101.56.2.1.2.46	INTEGER	read-write	Set lsp MTU in bytes
sleISISProcDistanceV4	1.3.6.1.4.1.6296.101.56.2.3
OCT sleISISProcDistanceV4AccessList	1.3.6.1.4.1.6296.101.56.2.3.1.1.4	OCTET STRING	read-only	Access-list name.
sleISISProcDistanceV4Control	1.3.6.1.4.1.6296.101.56.2.3.2
OCT sleISISProcDistanceV4ControlAccessList	1.3.6.1.4.1.6296.101.56.2.3.2.9	OCTET STRING	read-only	Access-list name.
I32 sleISISProcDistanceV4ControlDist	1.3.6.1.4.1.6296.101.56.2.3.2.7	Integer32	read-only	ISIS Administrative Distance range
I32 sleISISProcDistanceV4ControlInstanceID	1.3.6.1.4.1.6296.101.56.2.3.2.6	Integer32	read-only	Set the ISIS Instance ID
INT sleISISProcDistanceV4ControlRequest	1.3.6.1.4.1.6296.101.56.2.3.2.1	INTEGER	read-write	Description.
SLE sleISISProcDistanceV4ControlStatus	1.3.6.1.4.1.6296.101.56.2.3.2.2	SleControlStatusType	read-only	Description.
OCT sleISISProcDistanceV4ControlSytemID	1.3.6.1.4.1.6296.101.56.2.3.2.8	OCTET STRING	read-only	Source ID in XXXX.XXXX.XXXX format.
G32 sleISISProcDistanceV4ControlTimer	1.3.6.1.4.1.6296.101.56.2.3.2.3	Gauge32	read-write	Description.
I32 sleISISProcDistanceV4Dist	1.3.6.1.4.1.6296.101.56.2.3.1.1.2	Integer32	read-only	ISIS Administrative Distance range
sleISISProcDistanceV4Entry	1.3.6.1.4.1.6296.101.56.2.3.1.1		not-accessible	Description.
I32 sleISISProcDistanceV4InstanceID	1.3.6.1.4.1.6296.101.56.2.3.1.1.1	Integer32	read-only	ISIS Instance ID
sleISISProcDistanceV4Notification	1.3.6.1.4.1.6296.101.56.2.3.3
SLE sleISISProcDistanceV4ntrolReqResult	1.3.6.1.4.1.6296.101.56.2.3.2.5	SleControlRequestResultType	read-only	Description.
OCT sleISISProcDistanceV4SytemID	1.3.6.1.4.1.6296.101.56.2.3.1.1.3	OCTET STRING	read-only	Source ID in XXXX.XXXX.XXXX format.
sleISISProcDistanceV4Table	1.3.6.1.4.1.6296.101.56.2.3.1		not-accessible	Description.
TIK sleISISProcDistanceV4TimeStamp	1.3.6.1.4.1.6296.101.56.2.3.2.4	TimeTicks	read-only	Description.
INT sleISISProcDomPassAuthSnp	1.3.6.1.4.1.6296.101.56.2.1.1.1.35	INTEGER	read-only	SNP Authentication of ISIS Routing domain
OCT sleISISProcDomPassVal	1.3.6.1.4.1.6296.101.56.2.1.1.1.34	OCTET STRING	read-only	ISIS Routing domain password
INT sleISISProcDynHostname	1.3.6.1.4.1.6296.101.56.2.1.1.1.5	INTEGER	read-only	Enable dynamic hostname
INT sleISISProcDynHostnameAreaTag	1.3.6.1.4.1.6296.101.56.2.1.1.1.6	INTEGER	read-only	Use area-tag as hostname
INT sleISISProcIgnLspErr	1.3.6.1.4.1.6296.101.56.2.1.1.1.7	INTEGER	read-only	Ignore LSPs with bad checksums
sleISISProcInfo	1.3.6.1.4.1.6296.101.56.2.1
sleISISProcInfoControl	1.3.6.1.4.1.6296.101.56.2.1.2
INT sleISISProcInfoControlAreaPassAuthSnp	1.3.6.1.4.1.6296.101.56.2.1.2.41	INTEGER	read-write	SNP Authentication of ISIS Routing domain
OCT sleISISProcInfoControlAreaPassVal	1.3.6.1.4.1.6296.101.56.2.1.2.40	OCTET STRING	read-write	ISIS Routing Area password
INT sleISISProcInfoControlAuthMode	1.3.6.1.4.1.6296.101.56.2.1.2.34	INTEGER	read-write	Authentication mode of ISIS Process
INT sleISISProcInfoControlAuthModeLevel	1.3.6.1.4.1.6296.101.56.2.1.2.35	INTEGER	read-write	Authentication level of ISIS Process
INT sleISISProcInfoControlAuthSendOnly	1.3.6.1.4.1.6296.101.56.2.1.2.36	INTEGER	read-write	Authentication send-only
INT sleISISProcInfoControlAuthSendOnlyLevel	1.3.6.1.4.1.6296.101.56.2.1.2.37	INTEGER	read-write	Level of Authentication send-only
INT sleISISProcInfoControlBfdAllInterface	1.3.6.1.4.1.6296.101.56.2.1.2.7	INTEGER	read-write	Enable BFD on all interfaces
INT sleISISProcInfoControlCapCspf	1.3.6.1.4.1.6296.101.56.2.1.2.8	INTEGER	read-write	Enable Constrained Shortest Path First
INT sleISISProcInfoControlDomPassAuthSnp	1.3.6.1.4.1.6296.101.56.2.1.2.39	INTEGER	read-write	SNP Authentication of ISIS Routing domain
OCT sleISISProcInfoControlDomPassVal	1.3.6.1.4.1.6296.101.56.2.1.2.38	OCTET STRING	read-write	ISIS Routing domain password
INT sleISISProcInfoControlDynHostname	1.3.6.1.4.1.6296.101.56.2.1.2.9	INTEGER	read-write	Enable dynamic hostname
INT sleISISProcInfoControlDynHostnameAreaTag	1.3.6.1.4.1.6296.101.56.2.1.2.10	INTEGER	read-write	Use area-tag as hostname
INT sleISISProcInfoControlIgnLspErr	1.3.6.1.4.1.6296.101.56.2.1.2.11	INTEGER	read-write	Ignore LSPs with bad checksums
INT sleISISProcInfoControlIspfLevel	1.3.6.1.4.1.6296.101.56.2.1.2.13	INTEGER	read-write	Enable incremental SPF for ISIS proces
INT sleISISProcInfoControlIsTypeLevel	1.3.6.1.4.1.6296.101.56.2.1.2.14	INTEGER	read-write	IS Level for ISISprocess
INT sleISISProcInfoControlLspGenInterval	1.3.6.1.4.1.6296.101.56.2.1.2.15	INTEGER	read-write	Minimum interval between regenerating same LSP
INT sleISISProcInfoControlLspGenIntervalLevel	1.3.6.1.4.1.6296.101.56.2.1.2.16	INTEGER	read-write	IS Level for ISISprocess
INT sleISISProcInfoControlLspMtu	1.3.6.1.4.1.6296.101.56.2.1.2.17	INTEGER	read-write	Set lsp MTU in bytes
INT sleISISProcInfoControlLspMtuLevel	1.3.6.1.4.1.6296.101.56.2.1.2.18	INTEGER	read-write	IS Level for ISISprocess
INT sleISISProcInfoControlLspRefreshInterval	1.3.6.1.4.1.6296.101.56.2.1.2.19	INTEGER	read-write	Set LSP refresh interval
INT sleISISProcInfoControlMaxAreaAddressNum	1.3.6.1.4.1.6296.101.56.2.1.2.20	INTEGER	read-write	Configure isis maximum area address
INT sleISISProcInfoControlMaxLspLifetime	1.3.6.1.4.1.6296.101.56.2.1.2.21	INTEGER	read-write	Set maximum LSP lifetime
INT sleISISProcInfoControlMetricStyle	1.3.6.1.4.1.6296.101.56.2.1.2.22	INTEGER	read-write	Use old-style (ISO 10589) or new-style packet formats
INT sleISISProcInfoControlMetricStyleLevel	1.3.6.1.4.1.6296.101.56.2.1.2.23	INTEGER	read-write	Level of Metric Style
INT sleISISProcInfoControlMplsTrafficEngLevel	1.3.6.1.4.1.6296.101.56.2.1.2.24	INTEGER	read-write	Traffice Engine level of MPLS routing protocol
IP sleISISProcInfoControlMplsTrafficEngRouterID	1.3.6.1.4.1.6296.101.56.2.1.2.25	IpAddress	read-write	Traffice Engine Router ID of MPLS routing protocol
INT sleISISProcInfoControlPrcIntervalExpMaxDelay	1.3.6.1.4.1.6296.101.56.2.1.2.27	INTEGER	read-write	Use exponential backoff max delays between PRC calculation
INT sleISISProcInfoControlPrcIntervalExpMinDelay	1.3.6.1.4.1.6296.101.56.2.1.2.26	INTEGER	read-write	Use exponential backoff min delays between PRC calculation
INT sleISISProcInfoControlProtocolTopolgy	1.3.6.1.4.1.6296.101.56.2.1.2.28	INTEGER	read-write	Protocol Topology
SLE sleISISProcInfoControlReqResult	1.3.6.1.4.1.6296.101.56.2.1.2.5	SleControlRequestResultType	read-only	Description.
INT sleISISProcInfoControlRequest	1.3.6.1.4.1.6296.101.56.2.1.2.1	INTEGER	read-write	Description.
INT sleISISProcInfoControlRestartTimerLevel	1.3.6.1.4.1.6296.101.56.2.1.2.30	INTEGER	read-write	Restart timer level
INT sleISISProcInfoControlRestartTimerVal	1.3.6.1.4.1.6296.101.56.2.1.2.29	INTEGER	read-write	Protocol Topology
G32 sleISISProcInfoControlRouteHighPriorityTag	1.3.6.1.4.1.6296.101.56.2.1.2.12	Gauge32	read-write	Sets the high priority of route
INT sleISISProcInfoControlSetOverloadBit	1.3.6.1.4.1.6296.101.56.2.1.2.42	INTEGER	read-write	Signal other routers not to use us in SPF
INT sleISISProcInfoControlSetOverloadBitOnStartup	1.3.6.1.4.1.6296.101.56.2.1.2.43	INTEGER	read-write	Set overload-bit only temporarily after reboot
INT sleISISProcInfoControlSetOverloadBitOnStartupInterval	1.3.6.1.4.1.6296.101.56.2.1.2.44	INTEGER	read-write	Time in seconds to advertise ourself as overloaded after reboot
INT sleISISProcInfoControlSetOverloadBitSuppress	1.3.6.1.4.1.6296.101.56.2.1.2.45	INTEGER	read-write	If overload-bit set, suppress the following types of IP prefixes
INT sleISISProcInfoControlSpfIntervalExpLevel	1.3.6.1.4.1.6296.101.56.2.1.2.33	INTEGER	read-write	Level of SPF Interval Exp
INT sleISISProcInfoControlSpfIntervalExpMax	1.3.6.1.4.1.6296.101.56.2.1.2.32	INTEGER	read-write	Use exponential backoff max delays between SPF calculations
INT sleISISProcInfoControlSpfIntervalExpMin	1.3.6.1.4.1.6296.101.56.2.1.2.31	INTEGER	read-write	Use exponential backoff min delays between SPF calculations
SLE sleISISProcInfoControlStatus	1.3.6.1.4.1.6296.101.56.2.1.2.2	SleControlStatusType	read-only	Description.
OCT sleISISProcInfoControlTag	1.3.6.1.4.1.6296.101.56.2.1.2.6	OCTET STRING	read-write	ISIS Process Tag
G32 sleISISProcInfoControlTimer	1.3.6.1.4.1.6296.101.56.2.1.2.3	Gauge32	read-write	Description.
TIK sleISISProcInfoControlTimeStamp	1.3.6.1.4.1.6296.101.56.2.1.2.4	TimeTicks	read-only	Description.
sleISISProcInfoEntry	1.3.6.1.4.1.6296.101.56.2.1.1.1		not-accessible	Description.
I32 sleISISProcInfoInstanceID	1.3.6.1.4.1.6296.101.56.2.1.1.1.1	Integer32	read-only	Instance ID of ISIS Process
sleISISProcInfoNotification	1.3.6.1.4.1.6296.101.56.2.1.3
sleISISProcInfoTable	1.3.6.1.4.1.6296.101.56.2.1.1		not-accessible	Description.
OCT sleISISProcInfoTag	1.3.6.1.4.1.6296.101.56.2.1.1.1.2	OCTET STRING	read-only	ISIS Process Tag
INT sleISISProcIspfLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.9	INTEGER	read-only	Enable incremental SPF for ISIS proces
INT sleISISProcIsTypeLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.10	INTEGER	read-only	IS Level for ISIS process
INT sleISISProcLspGenInterval	1.3.6.1.4.1.6296.101.56.2.1.1.1.11	INTEGER	read-only	Minimum interval between regenerating same LSP
INT sleISISProcLspGenIntervalLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.12	INTEGER	read-only	IS Level for ISIS process
INT sleISISProcLspMtu	1.3.6.1.4.1.6296.101.56.2.1.1.1.13	INTEGER	read-only	Set lsp MTU in bytes
INT sleISISProcLspMtuLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.14	INTEGER	read-only	IS Level for ISIS process
INT sleISISProcLspRefreshInterval	1.3.6.1.4.1.6296.101.56.2.1.1.1.15	INTEGER	read-only	Set LSP refresh interval
INT sleISISProcMaxAreaAddressNum	1.3.6.1.4.1.6296.101.56.2.1.1.1.16	INTEGER	read-only	Configure isis maximum area address
INT sleISISProcMaxLspLifetime	1.3.6.1.4.1.6296.101.56.2.1.1.1.17	INTEGER	read-only	Set maximum LSP lifetime
INT sleISISProcMetricStyle	1.3.6.1.4.1.6296.101.56.2.1.1.1.18	INTEGER	read-only	Use old-style (ISO 10589) or new-style packet formats
INT sleISISProcMetricStyleLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.19	INTEGER	read-only	Level of Metric Style
INT sleISISProcMplsTrafficEngLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.20	INTEGER	read-only	Traffice Engine level of MPLS routing protocol
IP sleISISProcMplsTrafficEngRouterID	1.3.6.1.4.1.6296.101.56.2.1.1.1.21	IpAddress	read-only	Traffice Engine Router ID of MPLS routing protoco
sleISISProcNet	1.3.6.1.4.1.6296.101.56.2.2
sleISISProcNetControl	1.3.6.1.4.1.6296.101.56.2.2.2
I32 sleISISProcNetControlInstanceID	1.3.6.1.4.1.6296.101.56.2.2.2.6	Integer32	read-write	Description.
SLE sleISISProcNetControlReqResult	1.3.6.1.4.1.6296.101.56.2.2.2.5	SleControlRequestResultType	read-only	Description.
INT sleISISProcNetControlRequest	1.3.6.1.4.1.6296.101.56.2.2.2.1	INTEGER	read-write	Description.
SLE sleISISProcNetControlStatus	1.3.6.1.4.1.6296.101.56.2.2.2.2	SleControlStatusType	read-only	Description.
G32 sleISISProcNetControlTimer	1.3.6.1.4.1.6296.101.56.2.2.2.3	Gauge32	read-write	Description.
TIK sleISISProcNetControlTimeStamp	1.3.6.1.4.1.6296.101.56.2.2.2.4	TimeTicks	read-only	Description.
OCT sleISISProcNetControlTitle	1.3.6.1.4.1.6296.101.56.2.2.2.7	OCTET STRING	read-write	Description.
sleISISProcNetEntry	1.3.6.1.4.1.6296.101.56.2.2.1.1		not-accessible	Description.
I32 sleISISProcNetInstanceID	1.3.6.1.4.1.6296.101.56.2.2.1.1.1	Integer32	read-only	Description.
sleISISProcNetNotification	1.3.6.1.4.1.6296.101.56.2.2.3
sleISISProcNetTable	1.3.6.1.4.1.6296.101.56.2.2.1		not-accessible	Description.
OCT sleISISProcNetTitle	1.3.6.1.4.1.6296.101.56.2.2.1.1.2	OCTET STRING	read-only	Description.
INT sleISISProcPrcIntervalExpMaxDelay	1.3.6.1.4.1.6296.101.56.2.1.1.1.23	INTEGER	read-only	Use exponential backoff max delays between PRC calculation
INT sleISISProcPrcIntervalExpMinDelay	1.3.6.1.4.1.6296.101.56.2.1.1.1.22	INTEGER	read-only	Use exponential backoff min delays between PRC calculation
INT sleISISProcProtocolTopolgy	1.3.6.1.4.1.6296.101.56.2.1.1.1.24	INTEGER	read-only	Protocol Topology
INT sleISISProcRestartTimerLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.26	INTEGER	read-only	Restart timer level
INT sleISISProcRestartTimerVal	1.3.6.1.4.1.6296.101.56.2.1.1.1.25	INTEGER	read-only	Restart timer interval
G32 sleISISProcRouteHighPriorityTag	1.3.6.1.4.1.6296.101.56.2.1.1.1.8	Gauge32	read-only	Sets the high priority of route
INT sleISISProcSetOverloadBit	1.3.6.1.4.1.6296.101.56.2.1.1.1.38	INTEGER	read-only	Signal other routers not to use us in SPF
INT sleISISProcSetOverloadBitOnStartup	1.3.6.1.4.1.6296.101.56.2.1.1.1.39	INTEGER	read-only	Set overload-bit only temporarily after reboot
I32 sleISISProcSetOverloadBitOnStartupInterval	1.3.6.1.4.1.6296.101.56.2.1.1.1.40	Integer32	read-only	Time in seconds to advertise ourself as overloaded after reboot
INT sleISISProcSetOverloadBitSuppress	1.3.6.1.4.1.6296.101.56.2.1.1.1.41	INTEGER	read-only	If overload-bit set, suppress the following types of IP prefixes
INT sleISISProcSpfIntervalExpLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.29	INTEGER	read-only	Level of SPF Interval Exp
INT sleISISProcSpfIntervalExpMax	1.3.6.1.4.1.6296.101.56.2.1.1.1.28	INTEGER	read-only	Use exponential backoff max delays between SPF calculations
INT sleISISProcSpfIntervalExpMin	1.3.6.1.4.1.6296.101.56.2.1.1.1.27	INTEGER	read-only	Use exponential backoff min delays between SPF calculations
INT sleISISProcWaitTimerLevel	1.3.6.1.4.1.6296.101.56.2.1.1.1.43	INTEGER	read-only	IS Level for ISIS process
INT sleISISProcWaitTimerVal	1.3.6.1.4.1.6296.101.56.2.1.1.1.42	INTEGER	read-only	Set lsp MTU in bytes
INT sleISISRestartGracePeriod	1.3.6.1.4.1.6296.101.56.1.1.3	INTEGER	read-only	ISIS Graceful-restart period. Seconds: Specify the number of seconds in the grace period.
INT sleISISRestartHelper	1.3.6.1.4.1.6296.101.56.1.1.2	INTEGER	read-write	ISIS restart helper
INT sleISISRestartSuppressAdjacency	1.3.6.1.4.1.6296.101.56.1.1.1	INTEGER	read-write	ISIS restart suppress-adjacency
sleISISSummanryAddress	1.3.6.1.4.1.6296.101.56.6
sleISISSummanryAddressControl	1.3.6.1.4.1.6296.101.56.6.2
I32 sleISISSummanryAddressControlInstanceId	1.3.6.1.4.1.6296.101.56.6.2.6	Integer32	read-write	The ISIS instance index
I32 sleISISSummanryAddressControlIpNetmask	1.3.6.1.4.1.6296.101.56.6.2.8	Integer32	read-write	The ISIS interface index ( 0 means all interface)
IP sleISISSummanryAddressControlIpValue	1.3.6.1.4.1.6296.101.56.6.2.7	IpAddress	read-write	The ISIS interface index ( 0 means all interface)
INT sleISISSummanryAddressControlLevel	1.3.6.1.4.1.6296.101.56.6.2.9	INTEGER	read-write	The ISIS interface index ( 0 means all interface)
I32 sleISISSummanryAddressControlMetric	1.3.6.1.4.1.6296.101.56.6.2.10	Integer32	read-write	The ISIS interface index ( 0 means all interface)
SLE sleISISSummanryAddressControlReqResult	1.3.6.1.4.1.6296.101.56.6.2.5	SleControlRequestResultType	read-only	Description.
INT sleISISSummanryAddressControlRequest	1.3.6.1.4.1.6296.101.56.6.2.1	INTEGER	read-write	The request of a user command
SLE sleISISSummanryAddressControlStatus	1.3.6.1.4.1.6296.101.56.6.2.2	SleControlStatusType	read-only	Description.
G32 sleISISSummanryAddressControlTimer	1.3.6.1.4.1.6296.101.56.6.2.3	Gauge32	read-write	Description.
TIK sleISISSummanryAddressControlTimeStamp	1.3.6.1.4.1.6296.101.56.6.2.4	TimeTicks	read-only	Description.
sleISISSummanryAddressEntry	1.3.6.1.4.1.6296.101.56.6.1.1		not-accessible	Description.
I32 sleISISSummanryAddressInstanceId	1.3.6.1.4.1.6296.101.56.6.1.1.1	Integer32	read-only	The ISIS instance index
I32 sleISISSummanryAddressIpNetmask	1.3.6.1.4.1.6296.101.56.6.1.1.3	Integer32	read-only	The passive interface configuration.
IP sleISISSummanryAddressIpValue	1.3.6.1.4.1.6296.101.56.6.1.1.2	IpAddress	read-only	The ISIS interface index
INT sleISISSummanryAddressLevel	1.3.6.1.4.1.6296.101.56.6.1.1.4	INTEGER	read-only	The passive interface configuration.
I32 sleISISSummanryAddressMetric	1.3.6.1.4.1.6296.101.56.6.1.1.5	Integer32	read-only	The passive interface configuration.
sleISISSummanryAddressTable	1.3.6.1.4.1.6296.101.56.6.1		not-accessible	Description.
slsISISIfEntry	1.3.6.1.4.1.6296.101.56.3.1.1		not-accessible	Description.
slsISISIfTable	1.3.6.1.4.1.6296.101.56.3.1		not-accessible	Description.
slsISISNotification	1.3.6.1.4.1.6296.101.56.3.3

RFC description

Management Information Base containing objects for IS-IS routing protocol configuration and monitoring. Includes authentication key chain and control timer settings for IS-IS protocol management.

Start monitoring Hanasoft SLE OLT (optical line terminal) platforms (IS-IS adjacency/link-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLE-ISIS-MIB

What Is SLE-ISIS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description