All MIBs › SLE-ISIS-MIB › sleISISIfControlBfdDisable
sleISISIfControlBfdDisable
Module: SLE-ISIS-MIB
OID (symbolic): SLE-ISIS-MIB::sleISISIfControlBfdDisable
OID (numeric): 1.3.6.1.4.1.6296.101.56.3.2.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.56.3.2.18 snmpwalk -v2c -c public <target> SLE-ISIS-MIB::sleISISIfControlBfdDisable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.56.3.2.18.1 snmpget -v2c -c public <target> SLE-ISIS-MIB::sleISISIfControlBfdDisable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.101.56.3.2.18.1 i <value>
Start monitoring Hanasoft SLE OLT (optical line terminal) platforms (IS-IS adjacency/link-state status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-ISIS-MIB::sleISISIfControlBfdDisable OID value, configure state conditions and alerts, and monitor any Hanasoft SLE OLT (optical line terminal) platforms (IS-IS adjacency/link-state status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6296 | dasan | DASAN-DHCP-MIB |
| 1.3.6.1.4.1.6296.101 | sleMgmt | DASAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6296.101.56 | sleISIS | SLE-ISIS-MIB |
| 1.3.6.1.4.1.6296.101.56.3 | sleISISIf | SLE-ISIS-MIB |
| 1.3.6.1.4.1.6296.101.56.3.2 | sleISISIfControl | SLE-ISIS-MIB |
| 1.3.6.1.4.1.6296.101.56.3.2.18 | sleISISIfControlBfdDisable | SLE-ISIS-MIB |