SL-ESCON-MIB

All MIBs › SL-ESCON-MIB

Organization: Smartoptics Networks Ltd.

Last Updated: 2002-08-19

Description: MIB for configuring and monitoring ESCON fiber channel interface ports and performance counters on Smartoptics SiteLight optical transport modules

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SL-ESCON-MIB?

SL-ESCON-MIB is a vendor MIB from Smartoptics for ESCON (Enterprise Systems Connection) fiber-channel interface ports carried over its SiteLight optical transport platform, a legacy IBM mainframe channel protocol still tunneled over optical transport in some enterprise environments. It exposes port configuration and login state alongside a rich set of performance-monitoring (PM) counters collected over defined measurement intervals. Its monitoring value is heavily performance/fault oriented: esconPortConfigLoginState shows whether the ESCON link has successfully logged in, esconPortCurrentRxSigLosses and esconPortCurrentRxSyncLosses flag signal or synchronization loss events, and esconPortCurrentRxLinkFailures directly counts link failures, while esconPortCurrentRxOctets/RxPkts provide throughput baselines — together revealing a degrading or flapping ESCON connection. The MIB is part of the SiteLight family and shares its transport-layer conventions with related MIBs like SL-VCG-MIB. It is deployed where ESCON channel extension is still required, such as legacy mainframe-to-storage links carried over modern optical transport equipment, and administrators can download the SL-ESCON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SL-ESCON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Smartoptics SiteLight optical transport platform (ESCON interface module)

Monitoring Examples

An administrator would check esconPortConfigLoginState to confirm an ESCON port has completed protocol login, and poll esconPortCurrentTable/esconPortCurrentEntry indexed by esconPortCurrentIndex for esconPortCurrentRxSigLosses and esconPortCurrentRxSyncLosses to detect intermittent optical signal problems. A rising esconPortCurrentRxLinkFailures counter combined with esconPortConfigValidIntervals (the number of complete PM intervals available) would indicate a chronically unstable channel needing physical-layer investigation, and esconPortResetPmCounters can be invoked to clear counters after a fix is applied.

What Can Be Monitored

ESCON login state
received octets/packets
signal loss events
synchronization loss events
link failure count
PM interval validity

Imported Objects

From IF-MIB

InterfaceIndex

From SL-NE-MIB

slService

OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
mib-2

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using esconPortCurrentRxOctets OID:

Select a Smartoptics SiteLight optical transport platform, ESCON interface module (link login/signal-loss statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type esconPortCurrentRxOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of octets of data received during the current interval. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
esconMIB	1.3.6.1.4.1.4515.1.1.5			The MIB module for Escon Interface.
esconMIBObjects	1.3.6.1.4.1.4515.1.1.5.1
esconConfig	1.3.6.1.4.1.4515.1.1.5.1.1
esconPortConfigTable	1.3.6.1.4.1.4515.1.1.5.1.1.1		not-accessible	A table that contains, one entry for each port.
esconPortConfigEntry	1.3.6.1.4.1.4515.1.1.5.1.1.1.1		not-accessible	An entry containing the result configuration and service parameters of a port.
NUM esconPortConfigIndex	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.1	InterfaceIndex	read-only	The ifIndex of the port.
ADR esconPortConfigSrcAddress	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.2	EsconAddressId	read-only	The source address of the physical path of this port. This value is valid only when state is validLogin(2).
ESC esconPortConfigSrcDescription	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.3	EsconNodeDescription	read-only	The description of the attached node. This value is valid only when state is validLogin(2).
INT esconPortConfigTranceiverMedia	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.4	INTEGER	read-only	The tranceiver media.
INT esconPortConfigResetPmCounters	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.5	INTEGER	read-write	Setting this variable to 1 will cause the current interval PM counters of the port to be initialized to zero (0).
INT esconPortConfigTranceiverType	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.6	INTEGER	read-only	The tranceiver type.
INT esconPortConfigStatus	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.7	INTEGER	read-only	This variable indicates the Line Status of the ESCON interface. The esconPortStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) simultaneously. esconPortNoAlarm must be set if and only if no other flag is set. The various bit positions are: 1 esconPortNoAlarm No alarm present 2 esconPortTransmitFault Transceiver transmit fault 4 esconPortLossOfSignal Transceiver signal detect failed 8 esconPortNoLink No link established yet.
INT esconPortConfigValidIntervals	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.8	INTEGER	read-only	The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
BIT esconPortConfigLoginState	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.9	Bits	read-only	The high bit signalSense(0) means that a physical connection has been established with the attached port. The high bit syncPort(1) means that the there there is a sequence synchronization with the attached port. The high bit validLogin(2) indicates that the physical path has been established.
INT esconPortResetPmCounters	1.3.6.1.4.1.4515.1.1.5.1.1.1.1.10	INTEGER	read-write	Setting this variable to 1 will cause the current interval Escon PM counters of the port to be initialized to zero (0).
esconPm	1.3.6.1.4.1.4515.1.1.5.1.2
esconPortCurrentTable	1.3.6.1.4.1.4515.1.1.5.1.2.1		not-accessible	The ESCON current table contains various statistics being collected for the current 15 minute interval.
esconPortCurrentEntry	1.3.6.1.4.1.4515.1.1.5.1.2.1.1		not-accessible	An entry in the Escon Current table.
NUM esconPortCurrentIndex	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.1	InterfaceIndex	read-only	The index value which uniquely identifies the ESCON interface to which this entry is applicable.
C64 esconPortCurrentRxOctetsEx	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.2	Counter64	read-only	The total number of octets of data received during the current interval.
C64 esconPortCurrentRxPkts	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.3	Counter64	read-only	The number of packets (including bad packets) received during the current interval.
C64 esconPortCurrentRxSigLosses	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.4	Counter64	read-only	The number of loss of signal detected during this current interval.
C64 esconPortCurrentRxSyncLosses	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.5	Counter64	read-only	The number of loss of synchronization detected during this current interval.
C64 esconPortCurrentRxLinkFailures	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.6	Counter64	read-only	The number of link failures detected during this current interval.
C64 esconPortCurrentRxInvalidCrcs	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.7	Counter64	read-only	The number of invalid CRC detected during this current interval.
C64 esconPortCurrentRxDelimiterErrors	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.8	Counter64	read-only	The number of Delimiter Errors detected during this current interval.
C64 esconPortCurrentRxDisparityErrors	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.9	Counter64	read-only	The number of Disparity Errors detected during this current interval.
C64 esconPortCurrentRxSizeFrames	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.10	Counter64	read-only	The number of too short or too long frames detected during this current interval.
C64 esconPortCurrentRxInvalidTxWords	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.11	Counter64	read-only	The number of invalid transmission word detected during this current interval.
C64 esconPortCurrentTxOctets	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.12	Counter64	read-only	The number of octets of data transmited during the current interval.
C64 esconPortCurrentTxPkts	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.13	Counter64	read-only	The number of packets (including bad packets) transmitted during the current interval.
C64 esconPortCurrentTxHeaderError	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.14	Counter64	read-only	The number of PL-ESC header error transmitted during the current interval.
C64 esconPortCurrentTxJitterUnderflow	1.3.6.1.4.1.4515.1.1.5.1.2.1.1.15	Counter64	read-only	The number of Jitter buffer underflow occurences during the current interval.
esconPortIntervalTable	1.3.6.1.4.1.4515.1.1.5.1.2.2		not-accessible	The ESCON In table contains various statistics being collected for the 15 minute intervals.
esconPortIntervalEntry	1.3.6.1.4.1.4515.1.1.5.1.2.2.1		not-accessible	An entry in the ESCON Interval table.
NUM esconPortIntervalIndex	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.1	InterfaceIndex	read-only	The index value which uniquely identifies the Escon interface to which this entry is applicable.
INT esconPortIntervalNumber	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.2	INTEGER	read-only	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
C64 esconPortIntervalRxOctets	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.3	Counter64	read-only	The number of octets of data received during the sampling interval.
C64 esconPortIntervalRxPkts	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.4	Counter64	read-only	The number of packets (including bad packets) received during the sampling interval.
C64 esconPortIntervalRxSigLosses	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.5	Counter64	read-only	The number of loss of signal detected during this sampling interval.
C64 esconPortIntervalRxSyncLosses	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.6	Counter64	read-only	The number of loss of synchronization detected during this sampling interval.
C64 esconPortIntervalRxLinkFailures	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.7	Counter64	read-only	The number of link failures detected during this sampling interval.
C64 esconPortIntervalRxInvalidCrcs	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.8	Counter64	read-only	The number of invalid CRC detected during this sampling interval.
C64 esconPortIntervalRxDelimiterErrors	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.9	Counter64	read-only	The number of Delimiter Errors detected during this sampling interval.
C64 esconPortIntervalRxDisparityErrors	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.10	Counter64	read-only	The number of Disparity Errors detected during this sampling interval.
C64 esconPortIntervalRxSizeFrames	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.11	Counter64	read-only	The number of too short or too long frames detected during this sampling interval.
C64 esconPortIntervalRxInvalidTxWords	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.12	Counter64	read-only	The current number of invalid transmission word detected during this sampling interval.
C64 esconPortIntervalTxOctets	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.13	Counter64	read-only	The number of octets of data transmited during the sampling interval.
C64 esconPortIntervalTxPkts	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.14	Counter64	read-only	The number of packets (including bad packets) transmitted during the sampling interval.
C64 esconPortIntervalTxHeaderError	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.15	Counter64	read-only	The number of PL-ESC header error transmitted during the sampling interval.
C64 esconPortIntervalTxJitterUnderflow	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.16	Counter64	read-only	The number of Jitter buffer underflow occurences during the sampling interval.
T/F esconPortIntervalValidData	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.17	TruthValue	read-only	This variable indicates if the data for this interval is valid.
T/F esconPortIntervalTcaFlag	1.3.6.1.4.1.4515.1.1.5.1.2.2.1.18	TruthValue	read-only	TRUE if one of the counters crossed the threshold during the interval.
esconPortTotalTable	1.3.6.1.4.1.4515.1.1.5.1.2.3		not-accessible	The Escon current table contains various statistics being collected for the pervious 24 hours. interval.
esconPortTotalEntry	1.3.6.1.4.1.4515.1.1.5.1.2.3.1		not-accessible	An entry in the Escon Total table.
NUM esconPortTotalIndex	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.1	InterfaceIndex	read-only	The index value which uniquely identifies the Escon interface to which this entry is applicable.
INT esconPortTotalDayNumber	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.2	INTEGER	not-accessible	A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval identified by 1 is the current 1-day interval, 2 is the previous (most recently completed) 1-day interval and n is the least recently completed 1-day interval.
C64 esconPortTotalRxOctets	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.3	Counter64	read-only	The total number of octets of data received during the sampling interval.
C64 esconPortTotalRxPkts	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.4	Counter64	read-only	The total number of packets (including bad packets) received during the sampling interval.
C64 esconPortTotalRxSigLosses	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.5	Counter64	read-only	The total number of loss of signal detected during this sampling interval.
C64 esconPortTotalRxSyncLosses	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.6	Counter64	read-only	The total number of loss of synchronization detected during this sampling interval.
C64 esconPortTotalRxLinkFailures	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.7	Counter64	read-only	The total number of link failures detected during this sampling interval.
C64 esconPortTotalRxInvalidCrcs	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.8	Counter64	read-only	The total number of invalid CRC detected during this sampling interval.
C64 esconPortTotalRxDelimiterErrors	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.9	Counter64	read-only	The total number of Delimiter Errors detected during this sampling interval.
C64 esconPortTotalRxDisparityErrors	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.10	Counter64	read-only	The total number of Disparity Errors detected during this sampling interval.
C64 esconPortTotalRxSizeFrames	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.11	Counter64	read-only	The total number of too short or too long frames detected during this sampling interval.
C64 esconPortTotalRxInvalidTxWords	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.12	Counter64	read-only	The total number of invalid transmission word detected during this sampling interval.
C64 esconPortTotalTxOctets	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.13	Counter64	read-only	The total number of octets of data transmited during the sampling interval.
C64 esconPortTotalTxPkts	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.14	Counter64	read-only	The number of packets (including bad packets) transmitted during the sampling interval.
C64 esconPortTotalTxHeaderError	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.15	Counter64	read-only	The total number of PL-ESC header error transmitted during the sampling interval.
C64 esconPortTotalTxJitterUnderflow	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.16	Counter64	read-only	The total number of Jitter buffer underflow occurences during the sampling interval.
T/F esconPortTotalValidData	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.17	TruthValue	read-only	This variable indicates if the data for this interval is valid.
T/F esconPortTotalTcaFlag	1.3.6.1.4.1.4515.1.1.5.1.2.3.1.18	TruthValue	read-only	TRUE if one of the counters crossed the threshold during the interval.
esconPortIntervalThresholdTable	1.3.6.1.4.1.4515.1.1.5.1.2.4		not-accessible	The Escon Threshold Table contains Interval thresholds for the PM counters collected by each Escon Interface (identified by esconPortIntervalThresholdIndex).
esconPortIntervalThresholdEntry	1.3.6.1.4.1.4515.1.1.5.1.2.4.1		not-accessible	An entry in the Escon Interval Threshold table.
NUM esconPortIntervalThresholdIndex	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.1	InterfaceIndex	read-only	The index value which uniquely identifies the Escon interface to which this entry is applicable.
C64 esconPortIntervalThresholdRxSigLosses	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.2	Counter64	read-write	The threshold for the number of signal loss detection.
C64 esconPortIntervalThresholdRxSyncLosses	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.3	Counter64	read-write	The threshold for the number of synchronization loss detection.
C64 esconPortIntervalThresholdRxLinkFailures	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.4	Counter64	read-write	The threshold for the number of link failures detection.
C64 esconPortIntervalThresholdRxInvalidCrcs	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.5	Counter64	read-write	The threshold for the number of invalid CRC detection.
C64 esconPortIntervalThresholdRxDelimiterErrors	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.6	Counter64	read-write	The threshold for the number of Delimiter Errors detection.
C64 esconPortIntervalThresholdRxDisparityErrors	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.7	Counter64	read-write	The threshold for the number of Disparity Errors detection.
C64 esconPortIntervalThresholdRxSizeFrames	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.8	Counter64	read-write	The threshold for the number of too short or too long frames errors detection.
C64 esconPortIntervalThresholdRxInvalidTxWords	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.9	Counter64	read-write	The threshold for the number of invalid transmission word detection.
C64 esconPortIntervalThresholdTxHeaderError	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.10	Counter64	read-write	The threshold for the number PL-ESC header transmitted detection.
C64 esconPortIntervalThresholdTxJitterUnderflow	1.3.6.1.4.1.4515.1.1.5.1.2.4.1.11	Counter64	read-write	The threshold for the number of Jitter buffer underflow detection.
esconPortDayThresholdTable	1.3.6.1.4.1.4515.1.1.5.1.2.5		not-accessible	The Escon Threshold Table contains Day thresholds for the PM counters collected by each Escon Interface (identified by esconPortDayThresholdIndex).
esconPortDayThresholdEntry	1.3.6.1.4.1.4515.1.1.5.1.2.5.1		not-accessible	An entry in the Escon Day Threshold table.
NUM esconPortDayThresholdIndex	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.1	InterfaceIndex	read-only	The index value which uniquely identifies the Escon interface to which this entry is applicable.
C64 esconPortDayThresholdRxSigLosses	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.2	Counter64	read-write	The threshold for the number of signal loss detection.
C64 esconPortDayThresholdRxSyncLosses	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.3	Counter64	read-write	The threshold for the number of synchronization loss detection.
C64 esconPortDayThresholdRxLinkFailures	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.4	Counter64	read-write	The threshold for the number of link failures detection.
C64 esconPortDayThresholdRxInvalidCrcs	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.5	Counter64	read-write	The threshold for the number of invalid CRC detection.
C64 esconPortDayThresholdRxDelimiterErrors	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.6	Counter64	read-write	The threshold for the number of Delimiter Errors detection.
C64 esconPortDayThresholdRxDisparityErrors	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.7	Counter64	read-write	The threshold for the number of Disparity Errors detection.
C64 esconPortDayThresholdRxSizeFrames	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.8	Counter64	read-write	The threshold for the number of too short or too long frames errors detection.
C64 esconPortDayThresholdRxInvalidTxWords	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.9	Counter64	read-write	The threshold for the number of invalid transmission word detection.
C64 esconPortDayThresholdTxHeaderError	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.10	Counter64	read-write	The threshold for the number PL-ESC header transmitted detection.
C64 esconPortDayThresholdTxJitterUnderflow	1.3.6.1.4.1.4515.1.1.5.1.2.5.1.11	Counter64	read-write	The threshold for the number of Jitter buffer underflow detection.
esconTraps	1.3.6.1.4.1.4515.1.1.5.1.3
OID esconCounterId	1.3.6.1.4.1.4515.1.1.5.1.3.1	OBJECT IDENTIFIER	read-only	The OBJECT IDENTIFIER of the instance of the Escon counter that has crossed its threshold.
C64 esconCounterValue	1.3.6.1.4.1.4515.1.1.5.1.3.2	Counter64	read-only	The current value of the Escon counter that has crossed its threshold.
NTF esconPortThresholdCrossing	1.3.6.1.4.1.4515.1.1.5.1.3.3			A esconPortThresholdCrossing trap is sent when the a PM counter exceeded the specified threshold.
NTF esconPortStatusChange	1.3.6.1.4.1.4515.1.1.5.1.3.4			A esconPortStatusChange trap is sent when the value of an instance esconPortConfigStatus changes. It can be utilized by an NMS to trigger polls.

RFC description

Smartoptics SiteLight ESCON module MIB for managing enterprise system connection interfaces and port configuration.

Start monitoring Smartoptics SiteLight optical transport platform, ESCON interface module (link login/signal-loss statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SL-ESCON-MIB