ARRIS-D5-DVB-EIS-MIB

All MIBs › ARRIS-D5-DVB-EIS-MIB

Organization: Arris International

Last Updated: 2010-08-12

Description: MIB for DVB simulcrypt External Interface Specification (EIS) configuration and video encryption on ARRIS D5 Universal Edge QAM devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ARRIS-D5-DVB-EIS-MIB?

ARRIS-D5-DVB-EIS-MIB is a vendor-specific MIB for ARRIS D5 Universal Edge QAM devices used in cable television head-end infrastructure, covering the DVB SimulCrypt External Interface Specification (EIS) used for conditional-access/video encryption signaling. It exposes tables of EIS client sessions, including connection status, IP address, active channel counts, and crypto group associations, i.e. configuration and session-state data rather than classic hardware sensors. For monitoring status, it lets an operator confirm that EIS clients are connected and active (simEisStatus, simEisTimeActive) and see how many channels/crypto groups each session is currently encrypting (simEisCurChannels, simEisCurrentSCGs), functioning as the software-service-status equivalent of process health on this platform. It builds conceptually on the DVB SimulCrypt standard for conditional-access signaling even though implemented as a proprietary ARRIS MIB. It is deployed in cable operator head-ends on ARRIS D5 edge QAM devices that need to report encryption session status to network management systems. Engineers can download the ARRIS-D5-DVB-EIS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ARRIS-D5-DVB-EIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS D5 Universal Edge QAM

Monitoring Examples

An operator would poll the simEisTable (indexed by simEisIndex) to check simEisStatus and simEisTimeActive for each configured EIS client, confirming the encryption session to the conditional-access system is up and how long it's been active. Comparing simEisCurChannels against simEisTotChannels for a given simEisChanId reveals whether all expected channels are currently being encrypted, and a drop in simEisCurrentSCGs would indicate a crypto group failure affecting simulcrypt output.

What Can Be Monitored

EIS client connection status
session active time
current vs. total encrypted channels
current crypto groups (SCGs)
EIS client IP/port

Imported Objects

From ARRIS-D5-ENT-CHASSIS-MIB

AdminState

From ARRIS-D5-VIDEO-MIB

D5PID

From ARRIS-MIB

arrisD5UEQam

OBJECT-IDENTITY

From SIM-MIB

ECMGCSuCasId
EMMGCommType
SectionTSPktFlag

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using simEisCurrentSCGs OID:

Select an ARRIS D5 Universal Edge QAM (UEQ) (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type simEisCurrentSCGs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of current SCGs for this EIS. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
T/F d5CwConformanceMechanism	1.3.6.1.4.1.4115.1.8.1.7.10.3	TruthValue	read-write	DVB CAS CW conformance mechanism control. TRUE => enabled (default)
d5EisMib	1.3.6.1.4.1.4115.1.8.1.7			This MIB contains objects related to configured Arris D5 Video Encryption configuration
d5SimCryptoGroup	1.3.6.1.4.1.4115.1.8.1.7.10
D5C d5SimCryptoMode	1.3.6.1.4.1.4115.1.8.1.7.10.1	D5CryptoMode	read-write	Global setting for Crypto Mode.
ADM d5SimEcmgAdminState	1.3.6.1.4.1.4115.1.8.1.7.7.1.2	AdminState	read-create	.
INT d5SimEcmgChannelDelay	1.3.6.1.4.1.4115.1.8.1.7.7.1.14	INTEGER	read-create	channel delay setting.
INT d5SimEcmgChannelTest	1.3.6.1.4.1.4115.1.8.1.7.7.1.12	INTEGER	read-create	channel test setting.
INT d5SimEcmgChannelTimeout	1.3.6.1.4.1.4115.1.8.1.7.7.1.13	INTEGER	read-create	channel timeout setting.
d5SimEcmgEntry	1.3.6.1.4.1.4115.1.8.1.7.7.1		not-accessible	.
STR d5SimEcmgGroup	1.3.6.1.4.1.4115.1.8.1.7.7.1.8	DisplayString	read-create	Name of the ECMG Group this ECMG is in.
ADM d5SimEcmgGroupAdminState	1.3.6.1.4.1.4115.1.8.1.7.8.1.2	AdminState	read-create	.
INT d5SimEcmgGroupCaSystemId	1.3.6.1.4.1.4115.1.8.1.7.8.1.4	INTEGER	read-create	.
d5SimEcmgGroupEntry	1.3.6.1.4.1.4115.1.8.1.7.8.1		not-accessible	.
T/F d5SimEcmgGroupLoadBalance	1.3.6.1.4.1.4115.1.8.1.7.8.1.5	TruthValue	read-create	.
STR d5SimEcmgGroupName	1.3.6.1.4.1.4115.1.8.1.7.8.1.1	DisplayString	read-create	Name of ECMG Group
ROW d5SimEcmgGroupStatus	1.3.6.1.4.1.4115.1.8.1.7.8.1.3	RowStatus	read-create	.
d5SimEcmgGroupTable	1.3.6.1.4.1.4115.1.8.1.7.8		not-accessible	.
IP d5SimEcmgIpAddress	1.3.6.1.4.1.4115.1.8.1.7.7.1.4	IpAddress	read-create	IP address of the host of the ECMG.
STR d5SimEcmgName	1.3.6.1.4.1.4115.1.8.1.7.7.1.1	DisplayString	read-create	Name of ECMG
T/F d5SimEcmgPrimary	1.3.6.1.4.1.4115.1.8.1.7.7.1.7	TruthValue	read-create	Set to TRUE if this is the primary ECMG in the group
INT d5SimEcmgProtoVersion	1.3.6.1.4.1.4115.1.8.1.7.7.1.9	INTEGER	read-create	Protocol version to use.
ROW d5SimEcmgStatus	1.3.6.1.4.1.4115.1.8.1.7.7.1.3	RowStatus	read-create	.
ECM d5SimEcmgSuCasId	1.3.6.1.4.1.4115.1.8.1.7.7.1.6	ECMGCSuCasId	read-create	The Super_CAS_ID is formed by concatenation of the CA_system_id (16 bit) and the CA_subsystem_ID (16 bit). It defines uniquely a set of ECMGs for a given SCS.
d5SimEcmgTable	1.3.6.1.4.1.4115.1.8.1.7.7		not-accessible	.
TIM d5SimEcmgTableDuration	1.3.6.1.4.1.4115.1.8.1.7.7.1.11	TimeStamp	read-only	Protocol version to use.
INT d5SimEcmgTableVersion	1.3.6.1.4.1.4115.1.8.1.7.7.1.10	INTEGER	read-only	ECM Table version in use.
INT d5SimEcmgTcpPort	1.3.6.1.4.1.4115.1.8.1.7.7.1.5	INTEGER	read-create	TCP port of the ECMG.
ADM d5SimEmmgAdminState	1.3.6.1.4.1.4115.1.8.1.7.9.1.2	AdminState	read-create	Used by an authorized manager to lock a conceptual row for exclusive write and create access.
INT d5SimEmmgBandwidth	1.3.6.1.4.1.4115.1.8.1.7.9.1.13	INTEGER	read-create	.
OCT d5SimEmmgCaDesc	1.3.6.1.4.1.4115.1.8.1.7.9.1.12	OCTET STRING	read-create	.
STR d5SimEmmgChannelContainer	1.3.6.1.4.1.4115.1.8.1.7.9.1.10	DisplayString	read-create	.
ECM d5SimEmmgClientId	1.3.6.1.4.1.4115.1.8.1.7.9.1.4	ECMGCSuCasId	read-create	Client ID for EMMG
EMM d5SimEmmgCommType	1.3.6.1.4.1.4115.1.8.1.7.9.1.5	EMMGCommType	read-only	Type of communication between EMMG/PDG and the multiplexer. Currently TCP or UDP.
INT d5SimEmmgDataId	1.3.6.1.4.1.4115.1.8.1.7.9.1.15	INTEGER	read-create	.
d5SimEmmgEntry	1.3.6.1.4.1.4115.1.8.1.7.9.1		not-accessible	.
T/F d5SimEmmgMpegSection	1.3.6.1.4.1.4115.1.8.1.7.9.1.14	TruthValue	read-create	.
IP d5SimEmmgMuxIpAddress	1.3.6.1.4.1.4115.1.8.1.7.9.1.6	IpAddress	read-create	IP address of the multiplexer for EMMG/PDG TCP communication.
INT d5SimEmmgMuxPort	1.3.6.1.4.1.4115.1.8.1.7.9.1.7	INTEGER	read-create	Port number (TCP) of the multiplexer for EMMG/PDG TCP communication.
IP d5SimEmmgMuxUIpAddress	1.3.6.1.4.1.4115.1.8.1.7.9.1.8	IpAddress	read-create	IP address of the multiplexer for EMMG/PDG UDP communication.
INT d5SimEmmgMuxUPort	1.3.6.1.4.1.4115.1.8.1.7.9.1.9	INTEGER	read-create	Port number (UDP) of the multiplexer for EMMG/PDG UDP communication.
STR d5SimEmmgName	1.3.6.1.4.1.4115.1.8.1.7.9.1.1	DisplayString	read-create	.
D5P d5SimEmmgPid	1.3.6.1.4.1.4115.1.8.1.7.9.1.11	D5PID	read-create	.
ROW d5SimEmmgStatus	1.3.6.1.4.1.4115.1.8.1.7.9.1.3	RowStatus	read-create	Used for table row creation management.
d5SimEmmgTable	1.3.6.1.4.1.4115.1.8.1.7.9		not-accessible	.
INT d5SimScsId	1.3.6.1.4.1.4115.1.8.1.7.10.2	INTEGER	read-write	Global SCS-ID used when sharing an ECMG between D5s.
T/F d5StrictEncryptionPolicy	1.3.6.1.4.1.4115.1.8.1.7.10.4	TruthValue	read-write	DVB CAS Strict Encryption policy. FALSE => disabled (default) Controls how sevices transition from CLEAR to SCRAMBLED TRUE => all service/components which match an active SCG config are scrambled irrespective of whether an ECM has been provisioned FALSE => service only transition from CLEAR to SCRAMBLED if an ECM as been provisioned - transtion_start_delay timer is honored
ADM simEisAdminState	1.3.6.1.4.1.4115.1.8.1.7.1.1.1	AdminState	read-write	Set state of EIS
OCT simEisCaDesc	1.3.6.1.4.1.4115.1.8.1.7.3.1.10	OCTET STRING	read-create	Private data to be added to the CA_Desc in the PMT for this SCG.
simEisCEntry	1.3.6.1.4.1.4115.1.8.1.7.2.1		not-accessible	Information about a single table entry
C32 simEisCErrorRx	1.3.6.1.4.1.4115.1.8.1.7.2.1.4	Counter32	read-only	The total number of channel error messages received.
C32 simEisCErrorTx	1.3.6.1.4.1.4115.1.8.1.7.2.1.5	Counter32	read-only	The total number of channel error messages sent.
INT simEisChanId	1.3.6.1.4.1.4115.1.8.1.7.1.1.9	INTEGER	read-only	The channel id open on this eis
C32 simEisChannelErrs	1.3.6.1.4.1.4115.1.8.1.7.1.1.12	Counter32	read-only	The total number of channels error received on this EIS.
INT simEisChannelId	1.3.6.1.4.1.4115.1.8.1.7.2.1.1	INTEGER	read-only	The ID of this channel currently open on this EIS.
C32 simEisChannelResets	1.3.6.1.4.1.4115.1.8.1.7.1.1.13	Counter32	read-only	The total number of channels error received on this EIS.
C32 simEisChannelTests	1.3.6.1.4.1.4115.1.8.1.7.1.1.14	Counter32	read-only	The total number of channels error received on this EIS.
IP simEisClientIp	1.3.6.1.4.1.4115.1.8.1.7.1.1.5	IpAddress	read-create	Optionally restrict access to a port to this ip address
C32 simEisCScgLists	1.3.6.1.4.1.4115.1.8.1.7.2.1.8	Counter32	read-only	The total number of SCG List messages received.
C32 simEisCScgProvs	1.3.6.1.4.1.4115.1.8.1.7.2.1.6	Counter32	read-only	The total number of SCG provision messages received.
C32 simEisCScgTests	1.3.6.1.4.1.4115.1.8.1.7.2.1.7	Counter32	read-only	The total number of SCG Test messages received.
simEisCTable	1.3.6.1.4.1.4115.1.8.1.7.2		not-accessible	This table specifies information relating to EIS/SCS channels including IP addresses of EISs communicating with the SCS
C32 simEisCTestsRx	1.3.6.1.4.1.4115.1.8.1.7.2.1.2	Counter32	read-only	The total number of channel status messages received
C32 simEisCTestsTx	1.3.6.1.4.1.4115.1.8.1.7.2.1.3	Counter32	read-only	The total number of channel status message sent.
C32 simEisCurChannels	1.3.6.1.4.1.4115.1.8.1.7.1.1.11	Counter32	read-only	The total number of channels currently open on this EIS.
C32 simEisCurrentSCGsEx	1.3.6.1.4.1.4115.1.8.1.7.1.1.8	Counter32	read-only	The total number of current SCGs for this EIS
simEisEntry	1.3.6.1.4.1.4115.1.8.1.7.1.1		not-accessible	Information about a single EIS table Entry
OCT simEisEsExclude	1.3.6.1.4.1.4115.1.8.1.7.1.1.18	OCTET STRING	read-create	List of up to 16 ES types (byte) which are to be excluded from the DVB-simulcrypt scrambling
INT simEisIndex	1.3.6.1.4.1.4115.1.8.1.7.1.1.3	INTEGER	read-only	The EIS Table unique index
STR simEisName	1.3.6.1.4.1.4115.1.8.1.7.1.1.6	DisplayString	read-create	Name of EIS
INT simEisPort	1.3.6.1.4.1.4115.1.8.1.7.1.1.4	INTEGER	read-create	The port an EIS must use to connect to the D5
STR simEisScgAccessCriteria	1.3.6.1.4.1.4115.1.8.1.7.5.1.6	DisplayString	read-create	The access criteria used by this ecmgroup.
TIM simEisScgActivationTime	1.3.6.1.4.1.4115.1.8.1.7.3.1.7	TimeStamp	read-create	Activation Time.
ADM simEisScgAdminState	1.3.6.1.4.1.4115.1.8.1.7.3.1.2	AdminState	read-write	Set state of Scg
INT simEisScgCpDuration	1.3.6.1.4.1.4115.1.8.1.7.3.1.6	INTEGER	read-create	Recommended Crypto Period Duration
ADM simEisScgEAdminState	1.3.6.1.4.1.4115.1.8.1.7.5.1.1	AdminState	read-write	Set state of Scg
INT simEisScgEcmId	1.3.6.1.4.1.4115.1.8.1.7.5.1.3	INTEGER	read-create	The SCG ECM ID identifier.
INT simEisScgEcmWakeup	1.3.6.1.4.1.4115.1.8.1.7.3.1.9	INTEGER	read-create	..
simEisScgEEntry	1.3.6.1.4.1.4115.1.8.1.7.5.1		not-accessible	Information about a single ECMGroup entry.
simEisScgEntry	1.3.6.1.4.1.4115.1.8.1.7.3.1		not-accessible	Information about a single table entry.
T/F simEisScgEphemeral	1.3.6.1.4.1.4115.1.8.1.7.4.1.7	TruthValue	read-only	If this vairable is set to TRUE then the associated service matches a wildcard.
C32 simEisScgErrors	1.3.6.1.4.1.4115.1.8.1.7.1.1.16	Counter32	read-only	The total number of SCG errors received on this EIS.
OCT simEisScgEsExclude	1.3.6.1.4.1.4115.1.8.1.7.3.1.11	OCTET STRING	read-create	List of up to 16 ES types (byte) which are to be excluded from the DVB-simulcrypt scrambling
ROW simEisScgEStatus	1.3.6.1.4.1.4115.1.8.1.7.5.1.2	RowStatus	read-create	Show state of SCG
OID simEisScgEStreamMib	1.3.6.1.4.1.4115.1.8.1.7.5.1.8	OBJECT IDENTIFIER	read-only	The pointer to a provider proprietary MIB.
simEisScgETable	1.3.6.1.4.1.4115.1.8.1.7.5		not-accessible	This table specifies information relating to SCG ecmgroups.
T/F simEisScgExclude	1.3.6.1.4.1.4115.1.8.1.7.4.1.6	TruthValue	read-create	If this vairable is set to TRUE then the associated service is excluded from scrambling.
INT simEisScgId	1.3.6.1.4.1.4115.1.8.1.7.3.1.1	INTEGER	read-create	SCG ID.
C32 simEisScgLists	1.3.6.1.4.1.4115.1.8.1.7.1.1.17	Counter32	read-only	The total number of SCG Lists received on this EIS.
OID simEisScgMpegMib	1.3.6.1.4.1.4115.1.8.1.7.4.1.5	OBJECT IDENTIFIER	read-only	The pointer to a provider proprietary MPEG MIB.
STR simEisScgName	1.3.6.1.4.1.4115.1.8.1.7.3.1.4	DisplayString	read-create	SCG name.
INT simEisScgNetworkId	1.3.6.1.4.1.4115.1.8.1.7.3.1.5	INTEGER	read-create	Original Network Id.
D5P simEisScgPid	1.3.6.1.4.1.4115.1.8.1.7.5.1.9	D5PID	read-create	The PID to be used to transmit the ECM for this ECM Stream.
C32 simEisScgProvs	1.3.6.1.4.1.4115.1.8.1.7.1.1.15	Counter32	read-only	The total number of SCG provisions received on this EIS.
ADM simEisScgSAdminState	1.3.6.1.4.1.4115.1.8.1.7.4.1.1	AdminState	read-write	Set state of Service
simEisScgSEntry	1.3.6.1.4.1.4115.1.8.1.7.4.1		not-accessible	Information about a single table entry.
INT simEisScgServiceId	1.3.6.1.4.1.4115.1.8.1.7.4.1.4	INTEGER	read-create	The SCG service identifier.
ROW simEisScgSStatus	1.3.6.1.4.1.4115.1.8.1.7.4.1.2	RowStatus	read-create	Show state of Service
simEisScgSTable	1.3.6.1.4.1.4115.1.8.1.7.4		not-accessible	This table specifies information relating to SCG services.
ROW simEisScgStatus	1.3.6.1.4.1.4115.1.8.1.7.3.1.3	RowStatus	read-create	Show state of SCG
INT simEisScgSTransportId	1.3.6.1.4.1.4115.1.8.1.7.4.1.3	INTEGER	read-create	Transport ID.
ECM simEisScgSuperCasId	1.3.6.1.4.1.4115.1.8.1.7.5.1.4	ECMGCSuCasId	read-create	The SCG EcmGroup SuperCas identifier.
simEisScgTable	1.3.6.1.4.1.4115.1.8.1.7.3		not-accessible	This table specifies the SCG Details.
ROW simEisStatus	1.3.6.1.4.1.4115.1.8.1.7.1.1.2	RowStatus	read-create	Show state of EIS
simEisTable	1.3.6.1.4.1.4115.1.8.1.7.1		not-accessible	This table specifies the setting to be used by an EIS to be able to communicate with the D5
TIM simEisTimeActive	1.3.6.1.4.1.4115.1.8.1.7.1.1.7	TimeStamp	read-only	Lenght of time EIS has been active
C32 simEisTotChannels	1.3.6.1.4.1.4115.1.8.1.7.1.1.10	Counter32	read-only	The total number of channels created for this EIS

RFC description

Manages video encryption system (EIS) configuration for Arris D5 QAM devices.

Start monitoring ARRIS D5 Universal Edge QAM (UEQ) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ARRIS-D5-DVB-EIS-MIB