SIAE-SENSOR-TEMP-MIB

All MIBs › SIAE-SENSOR-TEMP-MIB

Organization: SIAE MICROELETTRONICA spa

Last Updated: 2016-05-03

Category: Microwave Radio - SIAE MICROELETTRONICA

Description: Monitors SIAE MICROELETTRONICA microwave radio hardware temperature sensor readings and thresholds.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIAE-SENSOR-TEMP-MIB?

SIAE-SENSOR-TEMP-MIB is a vendor MIB from SIAE MICROELETTRONICA, an Italian manufacturer of microwave radio transmission equipment, dedicated to monitoring equipment temperature sensor readings. With no sample objects captured in this batch, its exposed data is inferred to be temperature sensor values and associated high/low alarm thresholds per equipment shelf or unit, consistent with the equipment heat module description. Its monitoring purpose is squarely hardware health — tracking the internal temperature of microwave radio transmission equipment to detect overheating that could indicate a cooling-fan failure, blocked ventilation, or excessive ambient heat before it causes signal degradation or hardware damage. It sits within SIAE's private enterprise MIB tree alongside other SIAE microwave-radio management modules. It is deployed on SIAE MICROELETTRONICA microwave radio links used in telecom backhaul networks, often in outdoor or shelter-mounted equipment exposed to variable ambient temperatures. Network engineers evaluating or troubleshooting this functionality can download the SIAE-SENSOR-TEMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIAE-SENSOR-TEMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SIAE MICROELETTRONICA microwave radio transmission equipment

Monitoring Examples

Without concrete sample objects for this entry, a specific polling scenario cannot be grounded in real object names; generally an operator would poll a temperature-sensor table for current readings against configured alarm thresholds to catch an overheating microwave radio unit, but the precise table/object names are not present in the provided data.

What Can Be Monitored

equipment temperature readings
temperature alarm thresholds

Imported Objects

From SIAE-ALARM-MIB

AlarmSeverityCode
AlarmStatus

From SIAE-TREE-MIB

siaeMib

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
sensorTemp	1.3.6.1.4.1.3373.1103.77			Management information for equipment heat.
INT sensorTempMibVersion	1.3.6.1.4.1.3373.1103.77.1	INTEGER	read-only	Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.
sensorTempTable	1.3.6.1.4.1.3373.1103.77.2		not-accessible	Table with sensorTemp device entries
sensorTempEntry	1.3.6.1.4.1.3373.1103.77.2.1		not-accessible	Temperature Sensor entry
I32 sensorTempIndex	1.3.6.1.4.1.3373.1103.77.2.1.1	Integer32	read-only	Temperature Sensor index.
I32 sensorTempValue	1.3.6.1.4.1.3373.1103.77.2.1.2	Integer32	read-only	Value of the temperature (in Celsius).
I32 sensorTempThreshold1	1.3.6.1.4.1.3373.1103.77.2.1.3	Integer32	read-only	This object can not be modified. It reports the temperature threshold 1. When sensorTempValue exceeds this value sensorTempStatus1 becomes Active. When threshold has been exceed status returns stand-by only when sensorTempValue goes under sensorTempHysteresis1.
I32 sensorTempThreshold2	1.3.6.1.4.1.3373.1103.77.2.1.4	Integer32	read-only	This object can not be modified. It reports the temperature threshold 2. When sensorTempValue exceeds this value sensorTempStatus2 becomes Active. When threshold has been exceed status returns stand-by only when sensorTempValue goes under sensorTempHysteresis2.
I32 sensorTempHysteresis1	1.3.6.1.4.1.3373.1103.77.2.1.5	Integer32	read-only	This object can not be modified. It reports the temperature hysteresis 1. When sensorTempStatus1 is Active it represents the value under which returns cleared.
I32 sensorTempHysteresis2	1.3.6.1.4.1.3373.1103.77.2.1.6	Integer32	read-only	This object can not be modified. It reports the temperature hysteresis 2. When sensorTempStatus1 is Active it represents the value under which returns cleared.
INT sensorTempStatus1	1.3.6.1.4.1.3373.1103.77.2.1.7	INTEGER	read-only	This object is used to manage temperature related to sensorTempThreshold1. Values mean: cleared: sensorTempValue is lower than threshold1 active: sensorTempValue is greater than threshold1 hysteresis: sensorTempValue is between threshold1 and hysteresis1 but previuosly greater than thresold1.
INT sensorTempStatus2	1.3.6.1.4.1.3373.1103.77.2.1.8	INTEGER	read-only	This object is used to manage temperature related to sensorTempThreshold2. Values mean: cleared: sensorTempValue is lower than threshold2 active: sensorTempValue is greater than threshold2 hysteresis: sensorTempValue is between threshold2 and hysteresis2 but previuosly greater than thresold2.
STR sensorTempLabel	1.3.6.1.4.1.3373.1103.77.2.1.9	DisplayString	read-only	A textual string containing information on sensorTemp sensor.
ALA sensorTempAlarmThreshold1	1.3.6.1.4.1.3373.1103.77.3	AlarmStatus	read-only	This object is used to notiy alarm if at least one entry in the sensorTemp table has got sensorTempStatus1 alarmed.
ALA sensorTempAlarmThreshold2	1.3.6.1.4.1.3373.1103.77.4	AlarmStatus	read-only	This object is used to notiy alarm if at least one entry in the sensorTemp table has got sensorTempStatus2 alarmed.
ALA sensorTempAlarmThreshold1Severity	1.3.6.1.4.1.3373.1103.77.5	AlarmSeverityCode	read-write	This object is used to change severity of sensorTempAlarmThreshold1.
ALA sensorTempAlarmThreshold2Severity	1.3.6.1.4.1.3373.1103.77.6	AlarmSeverityCode	read-write	This object is used to change severity of sensorTempAlarmThreshold2.
sensorTempMonitorTable	1.3.6.1.4.1.3373.1103.77.7		not-accessible	Table with sensorTempMonitor entries
sensorTempMonitorEntry	1.3.6.1.4.1.3373.1103.77.7.1		not-accessible	Temperature Sensor Monitor entry
INT sensorTempMonitorAdminStatus	1.3.6.1.4.1.3373.1103.77.7.1.1	INTEGER	read-write	The desired state of the temperatuure monitor. When a managed system initializes, all the temperature monitors start with sensorTempMonitorAdminStatus in the down(2) state, it's a default state also. As a result of either explicit management action or per configuration information retained by the managed system, sensorTempMonitorAdminStatus is then changed to the up(1) state (or remains in the down(2) state).
INT sensorTempMonitorOperStatus	1.3.6.1.4.1.3373.1103.77.7.1.2	INTEGER	read-only	The current state of the temperatuure monitor. Usually this object report the same value of sensorTempMonitorAdminStatus. When there is some problem related to the temperature sensor, this object shown the down(2) value even if sensorTempMonitorAdminStatus is set to up(1).
I32 sensorTempMonitorMinTemp	1.3.6.1.4.1.3373.1103.77.7.1.3	Integer32	read-only	The minimum value of the temperature measured in the last actual 900 seconds. The value is expressed in degrees Celsius.
I32 sensorTempMonitorMaxTemp	1.3.6.1.4.1.3373.1103.77.7.1.4	Integer32	read-only	The maximum value of the temperature measured in the last actual 900 seconds. The value is expressed in degrees Celsius.
I32 sensorTempMonitorAverageTemp	1.3.6.1.4.1.3373.1103.77.7.1.5	Integer32	read-only	The average value of the temperature measured in the last actual 900 seconds. The value is expressed in tenth of degrees Celsius.
INT sensorTempMonitorSystemControl	1.3.6.1.4.1.3373.1103.77.8	INTEGER	read-write	The administrative system control status requested by management for the TEMP-MONITOR feature. The value 'start'(1) indicates that TEMP-MONITOR should be supported in the device on all temperature sensors that have this capability (Those shown in sensorTempMonitorTable). The value shutdown(2) indicates that TEMP-MONITOR should be shutdown in the device on all temperature sensors.

RFC description

Manages temperature sensors on SIAE equipment with threshold-based alarms and heat monitoring.

Start monitoring SIAE MICROELETTRONICA microwave radio transmission equipment (temperature sensor readings/alarm thresholds) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIAE-SENSOR-TEMP-MIB

What Is SIAE-SENSOR-TEMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description