SIAE-CFGM-MIB

All MIBs › SIAE-CFGM-MIB

Organization: SIAE MICROELETTRONICA spa

Last Updated: 2014-07-25

Category: Microwave Radio - SIAE MICROELETTRONICA

Description: Covers configuration management and parameter versioning for SIAE MICROELETTRONICA microwave radios.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIAE-CFGM-MIB?

SIAE-CFGM-MIB is a configuration-management module from SIAE MICROELETTRONICA, an Italian manufacturer of microwave radio transmission equipment used in telecom backhaul networks. It handles backup and restore of the network element's (NE) configuration along with parameter versioning, so it belongs to the configuration/software-management category rather than live traffic statistics. Its monitoring relevance is largely software-status oriented: tracking whether a configuration backup or restore operation succeeded, and which configuration version/parameter set is currently active on the radio NE, which is important for change management and rollback after firmware or parameter updates. It likely depends on SIAE's broader system/inventory MIB for NE identification. It is deployed on SIAE microwave radio links used in cellular backhaul and point-to-point transmission networks. Network engineers evaluating or troubleshooting this functionality can download the SIAE-CFGM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIAE-CFGM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SIAE MICROELETTRONICA microwave radio network elements

Monitoring Examples

An operator would trigger and then poll the configuration backup/restore status objects to confirm a scheduled backup of the NE's configuration completed successfully before applying a firmware change, and to verify a restore brought the radio back to a known-good parameter set. Tracking the active configuration/parameter version object helps confirm that a fleet of radios is running a consistent, expected configuration after a rollout. A backup or restore reported as failed or in-progress past its expected window would indicate a management-channel or storage issue on the NE.

What Can Be Monitored

configuration backup status
configuration restore status
active configuration/parameter version
backup/restore operation result

Imported Objects

From SIAE-ALARM-MIB

alarmTrap

OBJECT-IDENTITY

From SIAE-EQUIP-MIB

equipIpSnmpAgentAddress

OBJECT-TYPE

From SIAE-TREE-MIB

siaeMib

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF configManagementFtpStatusTrap	1.3.6.1.4.1.3373.1103.0.3001			This event is generated by ALCP2E-NE when the status of configuration transfer is changed. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) configurationState 3) configurationFailure
configManagement	1.3.6.1.4.1.3373.1103.30			Backup and Restore (Configuration management) of the NE
INT configManagementMibVersion	1.3.6.1.4.1.3373.1103.30.1	INTEGER	read-only	Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.
STR configManagementFileName	1.3.6.1.4.1.3373.1103.30.2	DisplayString	read-write	Name of the file, containing the equipment configuration, to upload or download according to the object configManagementAction
IP configManagementServerIpAddress	1.3.6.1.4.1.3373.1103.30.3	IpAddress	read-write	Ip address of the SNMP manager connected from/to which the configuration is downloaded/uploaded, if this object is set '0.0.0.0', then the IP address of server is read from incoming ethernet packet.
INT configManagementAction	1.3.6.1.4.1.3373.1103.30.4	INTEGER	read-write	Action requested to the equipment: - configNone: no action required; - configSave: the current equipment configuration will be saved in the file whose name is written in the leaf configurationFileName through FTP protocol; - configUse: the configuration file, whose name is written in the leaf configurationFileName, will be transfer- red on the target through FTP protocol and it will be used after an implicit restart of the equip- ment. A copy of the current equipment configuration will be saved on the equipment filesystem in order to return to it. - configBack: the equipment configuration, saved during a config-use action will be used after an implicit restart of the equipment. - configAbort: the action in progress will be interrupted. - configBackAndSwich: the equipment configuration, saved during a config-use action will be used after an implicit bench switch of the equipment. The value of this object is self cleared (reset to the value configNone) after its use.
INT configManagementState	1.3.6.1.4.1.3373.1103.30.5	INTEGER	read-only	Action in progess state: - configCompleted: the action required has been successfully completed; - configInterrupted: the action required has been abnormally stopped; - configVerifying: the downloaded configuration is being checked if it is suitable for the equipment; - configSaving: current configuration is being saved to be tranferred to the manager; - configUploading: the current configuration is being transfer- red to the manager; - configDownloading: a configuration file is being transferred from the manager to the equipment; - configUsing: the current configuration is being overwrit- ten with the downloaded one or with the previously saved one; - configMaking-copy: a copy of the current configuration is being saved to eventually return to it; - configAborting: the current action is being aborted as requi- red by the config-abort action. - configRestarting: the equipment is restarting. - configStarted: the action required has been started; A trap is sent at every change of the object value. When the status become configStarted, the sent trap notifies the start of the required action. When the status become configCompleted or config-interrupted, the sent trap notifies a successfully or an abnormal end of the action in progress.
INT configManagementFailure	1.3.6.1.4.1.3373.1103.30.6	INTEGER	read-only	The value of this object identifies the configuration upload/ download state in which errors have been detected. The value config-aborted means interrupted by user.
U32 configManagementBackupFileDate	1.3.6.1.4.1.3373.1103.30.7	Unsigned32	read-only	Date and time of the previous configuration file saved by the config-use action. The value of this object is expressed as the number of seconds since the midnight of 1/1/1970. A zero value means no previous configuration file has been created.
INT configManagementTrapNotification	1.3.6.1.4.1.3373.1103.30.8	INTEGER	read-write	Enable/disable the trap generation on configuration tranfer operation

RFC description

Manages SIAE MICROELETTRONICA microwave radio configuration management and parameter versioning.

Start monitoring SIAE MICROELETTRONICA microwave radio network elements (configuration backup/restore status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIAE-CFGM-MIB

What Is SIAE-CFGM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description