All MIBs › SIAE-RADIO-SYSTEM-MIB
Organization: SIAE MICROELETTRONICA spa
Last Updated: 2016-07-14
Category: Microwave Radio - SIAE MICROELETTRONICA
Description: Manages SIAE MICROELETTRONICA microwave radio system parameters including frequency, polarization, and ATPC.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SIAE-RADIO-SYSTEM-MIB?
SIAE-RADIO-SYSTEM-MIB is a SIAE MICROELETTRONICA spa proprietary MIB (built on SIAE-ALARM-MIB/SIAE-EQUIP-MIB) reporting microwave-radio-link configuration, including XPIC (Cross-Polarization Interference Cancellation) support. Its objects cover a MIB version, a radio table (index, label, type, ifIndex, storage type), an XPIC table (index, radio index, row status) with a per-channel sub-table (polarization index, radio index, row status), a link-available index, and a link table (index, type, label, ifIndex). As a configuration/status MIB it lets an administrator confirm XPIC pairing and radio-link identity on a SIAE microwave radio system. It is deployed on SIAE MICROELETTRONICA microwave radio-link equipment. Engineers can download the SIAE-RADIO-SYSTEM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SIAE-RADIO-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- SIAE MICROELETTRONICA microwave radio-link equipment
Monitoring Examples
An administrator checks xpicChTable and radioLabel to confirm XPIC channel pairing and radio identity on a SIAE microwave radio link.
What Can Be Monitored
- XPIC pairing and radio-link identity/configuration
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndexOrZero |
From SIAE-ALARM-MIB
| AlarmSeverityCode | |
| AlarmStatus | |
| alarmTrap | OBJECT-IDENTITY |
From SIAE-EQUIP-MIB
| equipIpSnmpAgentAddress | OBJECT-TYPE |
From SIAE-TREE-MIB
| siaeMib | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF radioPrxChange | 1.3.6.1.4.1.3373.1103.0.8001 | This event is generated when radioPrx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpSnmpAgentAddress - agent IP address 2) radioIndex - branch index 3) radioName - user assinged name 4) radioPrx - PRX value | ||
| NTF radioPtxChange | 1.3.6.1.4.1.3373.1103.0.8002 | This event is generated when radioPtx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpSnmpAgentAddress - agent IP address 2) radioIndex - branch index 3) radioName - user assigned name 4) radioPtx - PTX value | ||
| radioSystem | 1.3.6.1.4.1.3373.1103.80 | Radio System MIB. | ||
| INT radioSystemMibVersion | 1.3.6.1.4.1.3373.1103.80.1 | INTEGER | read-only | Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01. |
| radioTable | 1.3.6.1.4.1.3373.1103.80.2 | not-accessible | A list of radio interface entries. This table is useful to show the manager all the available radio interfaces on the equipment. Moreover it is a reference for Performance Monitoring (PWR and G828). | |
| radioEntry | 1.3.6.1.4.1.3373.1103.80.2.1 | not-accessible | An entry containing management information applicable to a particular radio interface. | |
| I32 radioIndex | 1.3.6.1.4.1.3373.1103.80.2.1.1 | Integer32 | read-only | A unique value, greater than zero, for each radio interface. It is recommended that values are assigned contiguously starting from 1. |
| STR radioLabel | 1.3.6.1.4.1.3373.1103.80.2.1.2 | DisplayString | read-only | A textual string containing information about the radio interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software. |
| INT radioType | 1.3.6.1.4.1.3373.1103.80.2.1.3 | INTEGER | read-only | The type of interface. |
| NUM radioIfIndex | 1.3.6.1.4.1.3373.1103.80.2.1.4 | InterfaceIndexOrZero | read-only | This object defines a greater than zero value to identify an interface in ifTable or a zero value if ifTable is not supported. |
| STO radioStorageType | 1.3.6.1.4.1.3373.1103.80.2.1.5 | StorageType | read-only | The storage type of this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| xpicTable | 1.3.6.1.4.1.3373.1103.80.3 | not-accessible | A list of xpic radio interface entries. If a manager wants to make an xpic link, it should only add a particular xpic radio interface to an xpic link. | |
| xpicEntry | 1.3.6.1.4.1.3373.1103.80.3.1 | not-accessible | An entry containing management information applicable to a particular xpic radio interface. | |
| I32 xpicIndex | 1.3.6.1.4.1.3373.1103.80.3.1.1 | Integer32 | read-only | A unique value, greater than zero, for each xpic radio interface. It is recommended that values are assigned contiguously starting from 1. |
| I32 xpicRadioIdx | 1.3.6.1.4.1.3373.1103.80.3.1.2 | Integer32 | read-create | Index of xpic radio interface, corresponding to an available xpic radio interface in radioTable. |
| ROW xpicRowstatus | 1.3.6.1.4.1.3373.1103.80.3.1.3 | RowStatus | read-create | Status of this conceptual row in xpicTable. |
| xpicChTable | 1.3.6.1.4.1.3373.1103.80.4 | not-accessible | A list of xpic channel entries. This table maps each xpic radio in respective xpic radio interface. | |
| xpicChEntry | 1.3.6.1.4.1.3373.1103.80.4.1 | not-accessible | An entry containing management information applicable to a particular xpic channel. It defines radio interface and polarization for a given xpic channel. | |
| I32 xpicChPolIndex | 1.3.6.1.4.1.3373.1103.80.4.1.1 | Integer32 | read-only | This object identifies the xpic radio polarization. |
| I32 xpicChRadioIdx | 1.3.6.1.4.1.3373.1103.80.4.1.2 | Integer32 | read-create | Xpic radio interface, corresponding to a radio interface in radioTable, used to make up the given xpic radio interface. |
| ROW xpicChRowstatus | 1.3.6.1.4.1.3373.1103.80.4.1.3 | RowStatus | read-create | Status of this conceptual row in xpicChTable. |
| I32 linkAvailableIndex | 1.3.6.1.4.1.3373.1103.80.5 | Integer32 | read-only | Shows an index which is available for creation of a new link in the system. It shows the smallest available index. Any attempt to create a link with a different index results in a failure. |
| linkTable | 1.3.6.1.4.1.3373.1103.80.6 | not-accessible | A list of link entries. | |
| linkEntry | 1.3.6.1.4.1.3373.1103.80.6.1 | not-accessible | An entry containing management information applicable to a particular link. | |
| I32 linkIndex | 1.3.6.1.4.1.3373.1103.80.6.1.1 | Integer32 | read-only | A unique value, greater than zero, for each link. Manager must use the first available index, suggested by linkAvailableIndex. |
| INT linkType | 1.3.6.1.4.1.3373.1103.80.6.1.2 | INTEGER | read-create | This object identifies link type. Supported link types are: single link, 1+1 Hot Standby, 1+1 Frequency Diversity, 2+0 XPIC, 2+2 XPIC Hot Standby, 2+2 XPIC Frequency Diversity and N+1. |
| STR linkLabel | 1.3.6.1.4.1.3373.1103.80.6.1.3 | DisplayString | read-create | A textual string containing information about the link. This string should give more details about link specific parameters. |
| NUM linkIfIndex | 1.3.6.1.4.1.3373.1103.80.6.1.4 | InterfaceIndexOrZero | read-only | This object defines a greater than zero value to identify a link in ifTable or a zero value if ifTable is not supported. |
| ROW linkRowstatus | 1.3.6.1.4.1.3373.1103.80.6.1.5 | RowStatus | read-create | Status of this row of linkTable. This object is used to manage the creation and deletion of conceptual rows in linkTable. To create a row in this table, a manager should set rowstatus to createAndWait(5) and choose a link type. Respective entries in linkSettingsTable, linkStatusTable and tdmSettingsTable will be created by agent.In case of protection links proper entries in linkProtectionTable will be also created. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of rowstatus is notReady(3). When there is sufficient information to (attempt to) make the conceptual row available for use by the managed device, then the rowstatus column turns into notInService(2); manager must set rowstatus to active(1) to make the conceptual row active. The contents of linkSettingsTable and radioSettingsTable can be changed only if this object is notInService(2). |
| linkChTable | 1.3.6.1.4.1.3373.1103.80.7 | not-accessible | A list of link channel entries. | |
| linkChEntry | 1.3.6.1.4.1.3373.1103.80.7.1 | not-accessible | An entry containing management information applicable to a particular link channel. | |
| I32 linkChIndex | 1.3.6.1.4.1.3373.1103.80.7.1.1 | Integer32 | read-only | Link Channel Index. |
| I32 linkChRadioIdx | 1.3.6.1.4.1.3373.1103.80.7.1.2 | Integer32 | read-create | Radio channel index that corresponds to an available radio interface in radioTable. |
| I32 linkChRadioSettingsIdx | 1.3.6.1.4.1.3373.1103.80.7.1.3 | Integer32 | read-create | Radio Settings Index. This object is a foreign key for a corresponding radioSettingsTable entry, which is automatically created by agent. |
| ROW linkChRowstatus | 1.3.6.1.4.1.3373.1103.80.7.1.4 | RowStatus | read-create | Status of this row of linkChTable. This object is used to manage the creation and deletion of conceptual rows in linkChTable. To create a row in this table, a manager should set rowstatus to createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of rowstatus is notReady(3). When there is sufficient information to (attempt to) make the conceptual row available for use by the managed device, then the rowstatus column turns into notInService(2); manager must set rowstatus to active(1) to make the conceptual row active. The content of radioSettingsTable can be changed only if this object is notInService(2). |
| linkSettingsTable | 1.3.6.1.4.1.3373.1103.80.8 | not-accessible | Table with link settings entries. This table contains all parameters of a radio frequency link. The content of this table can be changed by a manager if linkRowStatus is notInService(2). | |
| linkSettingsEntry | 1.3.6.1.4.1.3373.1103.80.8.1 | not-accessible | Radio link entry | |
| I32 linkBandwidthAndModulation | 1.3.6.1.4.1.3373.1103.80.8.1.1 | Integer32 | read-create | Link Modulation and Bandwidth (channel spacing). The value of this object value is computed by: 65536*modulation+bandwidth where bandwidth selection is: 0 = 3.5Mhz 1 = 7MHz 2 = 14MHz 3 = 28MHz 4 = 56MHz 5 = 10MHz 6 = 20MHz 7 = 30MHz 8 = 40MHz 9 = 50MHz 10 = 112Mhz 11 = 250Mhz 12 = 500Mhz 13 = 750Mhz 14 = 1Ghz 15 = 60MHz 16 = 80MHz and modulation is in bit-per-symbol: 1 = BPSK 2 = 4QAM 3 = 8PSK 4 = 16QAM 5 = 32QAM 6 = 64QAM 7 = 128QAM 8 = 256QAM 9 = 512QAM 10 = 1024QAM 11 = 2048QAM. 12 = 4096QAM. Examples: 250Mhz-4QAM (131083), 500Mhz-4QAM (131084), 250Mhz-16QAM (262155), 500Mhz-64QAM (393228). Note: 0 bit-per-symbol is not possible, so value 0 is used for BandwidthAndModulation unassigned. |
| INT linkAcmEngineEnable | 1.3.6.1.4.1.3373.1103.80.8.1.2 | INTEGER | read-create | This object is used to enable/disable the ACM engine |
| INT linkTxUpperProfile | 1.3.6.1.4.1.3373.1103.80.8.1.3 | INTEGER | read-create | The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled. |
| INT linkTxLowerProfile | 1.3.6.1.4.1.3373.1103.80.8.1.4 | INTEGER | read-create | The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled. |
| INT linkId | 1.3.6.1.4.1.3373.1103.80.8.1.5 | INTEGER | read-create | Link Identification (value 0..255) |
| INT linkTxPwrThresh | 1.3.6.1.4.1.3373.1103.80.8.1.6 | INTEGER | read-create | Threshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set. |
| INT linkRxPwrThresh | 1.3.6.1.4.1.3373.1103.80.8.1.7 | INTEGER | read-create | Threshold (value -40 , -99 dBm) for RX power below wich the related alarm is set. |
| INT linkSynchSetupProtocolEnable | 1.3.6.1.4.1.3373.1103.80.8.1.8 | INTEGER | read-create | Synchronization Setup Protocol (SSP) control |
| INT linkProfilesSetSelection | 1.3.6.1.4.1.3373.1103.80.8.1.9 | INTEGER | read-create | Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greater robustness against to the set of profiles high throughput. For radio systems that do not have more sets of profiles, this object becomes read only and its reading shows the only one set of profiles supported. |
| INT linkXpicControlProcedure | 1.3.6.1.4.1.3373.1103.80.8.1.10 | INTEGER | read-create | Set by manager to enable\disable XPIC alarm control procedure. Only for XPIC configurations. |
| radioSettingsTable | 1.3.6.1.4.1.3373.1103.80.9 | not-accessible | Table with radio settings entries. This table contains all parameters of a radio terminal. The content of this table can be changed only linkRowStatus is notInService(2) | |
| radioSettingsEntry | 1.3.6.1.4.1.3373.1103.80.9.1 | not-accessible | Radio terminal entry | |
| I32 radioSettingsIndex | 1.3.6.1.4.1.3373.1103.80.9.1.1 | Integer32 | read-only | Radio settings index. |
| ROW radioSettingsRowStatus | 1.3.6.1.4.1.3373.1103.80.9.1.2 | RowStatus | read-create | Status of this row. |
| STR radioSettingsLabel | 1.3.6.1.4.1.3373.1103.80.9.1.3 | DisplayString | read-only | A textual string containing information about the radio interface. |
| INT radioTxFrequency | 1.3.6.1.4.1.3373.1103.80.9.1.4 | INTEGER | read-create | Transmitted frequency in KHz. Null value means invalid frequency. |
| INT radioDuplexFrequency | 1.3.6.1.4.1.3373.1103.80.9.1.5 | INTEGER | read-create | Value of duplex frequency in KHz. -2 means not set. |
| INT radioTxAttenuation | 1.3.6.1.4.1.3373.1103.80.9.1.6 | INTEGER | read-create | Transmitter attenuation relative to nominal power (dBm). |
| INT radioAtpcManual | 1.3.6.1.4.1.3373.1103.80.9.1.7 | INTEGER | read-create | Enables/disables Atpc Manual operation. |
| I32 radioAtpcPwrHigh | 1.3.6.1.4.1.3373.1103.80.9.1.8 | Integer32 | read-create | ATPC Control - Local Rx Power High (dBm range -30 to -80) -. |
| I32 radioAtpcPwrLow | 1.3.6.1.4.1.3373.1103.80.9.1.9 | Integer32 | read-create | ATPC Control - Local Rx Power Low (dBm range -30 to -80) -. |
| I32 radioAtpcRange | 1.3.6.1.4.1.3373.1103.80.9.1.10 | Integer32 | read-create | Defines the range of the ATPC regulation (expressed in dB) with respect to the current value of maximum Tx output, that is intended as the upper limit of the range. A null value means no limit: the lower limit of the range is equal to minimum Ptx. |
| CHA radioFreqTableSelection | 1.3.6.1.4.1.3373.1103.80.9.1.11 | ChannelSpacing | read-create | RadioFrequencyTable key (channel spacing & modulation) selection. |
| tdmSettingsTable | 1.3.6.1.4.1.3373.1103.80.10 | not-accessible | Table with tdm settings entries. | |
| tdmSettingsEntry | 1.3.6.1.4.1.3373.1103.80.10.1 | not-accessible | An entry containing tdm parameters for a particular link. | |
| I32 tdmPolIndex | 1.3.6.1.4.1.3373.1103.80.10.1.1 | Integer32 | read-only | Polarization index. |
| I32 tdmE1Channel | 1.3.6.1.4.1.3373.1103.80.10.1.2 | Integer32 | read-write | Number of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mbit/s). |
| INT tdmE1Framer | 1.3.6.1.4.1.3373.1103.80.10.1.3 | INTEGER | read-write | This object is used to attach the framer to a given E1. |
| radioCapabilitiesTable | 1.3.6.1.4.1.3373.1103.80.11 | not-accessible | Table with RadioCapabilities entries: there is an entry for each radioTable rows. | |
| radioCapabilitiesEntry | 1.3.6.1.4.1.3373.1103.80.11.1 | not-accessible | RadioCapabilities entry. | |
| RAD radioCapabilitiesCapability | 1.3.6.1.4.1.3373.1103.80.11.1.1 | RadioCapability | read-only | Bit map to describe the radio features. |
| I32 radioCapabilitiesTxMinFrequency | 1.3.6.1.4.1.3373.1103.80.11.1.2 | Integer32 | read-only | Minimum of available channel frequency in KHz. |
| I32 radioCapabilitiesTxMaxFrequency | 1.3.6.1.4.1.3373.1103.80.11.1.3 | Integer32 | read-only | Maximum of available channel frequency in KHz. |
| I32 radioCapabilitiesStepFrequency | 1.3.6.1.4.1.3373.1103.80.11.1.4 | Integer32 | read-only | Minimum frequency step in KHz. |
| I32 radioCapabilitiesMinPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.11.1.5 | Integer32 | read-only | Minimum nominal Ptx in dBm. |
| I32 radioCapabilitiesMaxPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.11.1.6 | Integer32 | read-only | Maximum nominal Ptx in dBm. |
| I32 radioCapabilitiesExtendedMinPwr | 1.3.6.1.4.1.3373.1103.80.11.1.7 | Integer32 | read-only | Minimum extended Ptx power for fade margin. |
| radioStatusTable | 1.3.6.1.4.1.3373.1103.80.12 | not-accessible | Table with RadioStatus records: one record for 1+0 configuration and two record for 1+1 configuration. | |
| radioStatusEntry | 1.3.6.1.4.1.3373.1103.80.12.1 | not-accessible | RadioStatus record. | |
| I32 radioCurrentDuplexFrequency | 1.3.6.1.4.1.3373.1103.80.12.1.1 | Integer32 | read-only | Spacing between transmitted and received frequency in KHz. |
| I32 radioTxChannelSpacing | 1.3.6.1.4.1.3373.1103.80.12.1.2 | Integer32 | read-only | Half of transmitted signal channel spacing in KHz. |
| I32 radioPrx | 1.3.6.1.4.1.3373.1103.80.12.1.3 | Integer32 | read-only | Received power level (dBm). |
| I32 radioPtx | 1.3.6.1.4.1.3373.1103.80.12.1.4 | Integer32 | read-only | Transmitted power level (dBm). |
| I32 radioNormalizedMse | 1.3.6.1.4.1.3373.1103.80.12.1.5 | Integer32 | read-only | Normalized MSE (Mean Squared Error) is an indicator of the Signal to Noise (S/N) ratio. It's in 0.1 dB steps |
| INT radioRxActiveStatus | 1.3.6.1.4.1.3373.1103.80.12.1.6 | INTEGER | read-only | Receiver Active status with associated Severity In 1+1 Hot Standby radio system, only one RX is active. RXs are active in other configurations of the radio system. |
| INT radioTxActiveStatus | 1.3.6.1.4.1.3373.1103.80.12.1.7 | INTEGER | read-only | Transmitter Active status with associated Severity. In 1+1 Hot Standby radio system, only one TX is active. TXs are active in other configurations of the radio system. |
| ALA radioCableOpenAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.8 | AlarmStatus | read-only | Cable connnecting ODU is open: alarm status with associated severity. |
| ALA radioCableShortAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.9 | AlarmStatus | read-only | Cable connnecting ODU is in short-circuit: alarm status with associated severity. |
| ALA radioInvalidFrequencyAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.10 | AlarmStatus | read-only | Invalid frequency alarm with associated severity. |
| ALA radioBaseBandRxAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.11 | AlarmStatus | read-only | Base Band Rx alarm status with associated severity. |
| ALA radioModulatorFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.12 | AlarmStatus | read-only | Modulator Fail Alarm status with associated severity. |
| ALA radioDemodulatorFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.13 | AlarmStatus | read-only | Demodulator Fail Alarm status with associated severity. |
| ALA radioRxPowerLowAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.14 | AlarmStatus | read-only | Receiver power low alarm status with associated severity. |
| ALA radioTxPowerLowAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.15 | AlarmStatus | read-only | Transmitter power low alarm status with associated severity. |
| ALA radioRemDemodulatorFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.16 | AlarmStatus | read-only | Remote Demodulator Fail Alarm status with associated severity. |
| ALA radioVcoFailAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.17 | AlarmStatus | read-only | RT VCO fail alarm status with associated severity. |
| ALA radioRxIFAgcAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.18 | AlarmStatus | read-only | RT Rx IF AGC fail alarm status with associated severity. |
| ALA radioTxIFAgcAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.19 | AlarmStatus | read-only | RT Tx IF AGC fail alarm status with associated severity. |
| ALA radioIduOduCommunicationAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.20 | AlarmStatus | read-only | Communication from IDU towards ODU is down |
| ALA radioOduIduCommunicationAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.21 | AlarmStatus | read-only | Communication from ODU towards IDU is down |
| ALA radioLocalOduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.12.1.22 | AlarmStatus | read-only | Local ODU alarm synthesis with associated severity. |
| ALA radioRemoteOduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.12.1.23 | AlarmStatus | read-only | Local ODU alarm synthesis alarm status with associated severity. |
| ALA radioConfigMismatchAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.24 | AlarmStatus | read-only | Config Mismatch alarm status with associated severity and related map. |
| CON radioConfigAlarmReason | 1.3.6.1.4.1.3373.1103.80.12.1.25 | ConfigMismatchReason | read-only | Bit map to describe the Config Mismatch Alarm |
| ALA radioRxQualityLowAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.26 | AlarmStatus | read-only | High BER Alarm status with associated severity. |
| ALA radioRxQualityWarningAlarm | 1.3.6.1.4.1.3373.1103.80.12.1.27 | AlarmStatus | read-only | The RX signal is close to cause errors on payload. |
| I32 radioXpd | 1.3.6.1.4.1.3373.1103.80.12.1.28 | Integer32 | read-only | Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polarized signal. This object shows an extimated value of the XPD performed by the cross-polarization interference canceller (XPIC). This means that the measure is reliable if: - XPIC is on (linkType is radio2p0Xpic(4), or radio2p2XpicHS(5), or radio2p2XpicFD(6)) - Alarm radioDemodulatorFailAlarm is cleared. - XPD is not too high, since without cross-polar interference the canceller is not able to works well. Basically, in this condition, the extimated XPD is greater than the real one. |
| radioMaintTable | 1.3.6.1.4.1.3373.1103.80.13 | not-accessible | Table with Command for maintenance of radio branch. Objects in this table is not persistent. An Instance of this table is created on creation of radioBranchEntry | |
| radioMaintEntry | 1.3.6.1.4.1.3373.1103.80.13.1 | not-accessible | Radio branch Maintenance record. | |
| INT radioTxStatus | 1.3.6.1.4.1.3373.1103.80.13.1.1 | INTEGER | read-write | Transmitter status control. The value transmitterOff(1) is related to a manual operation. The value permanentOff(3) is persistent across restart. |
| INT radioCarrierOnly | 1.3.6.1.4.1.3373.1103.80.13.1.2 | INTEGER | read-write | Carrier only transmission control. |
| INT radioLoop | 1.3.6.1.4.1.3373.1103.80.13.1.3 | INTEGER | read-write | Enables/disables the Radio Branch loops. |
| INT radioRFLoopTestResult | 1.3.6.1.4.1.3373.1103.80.13.1.4 | INTEGER | read-only | Radio branch RT loop test result. |
| INT radioRFLoopTestPercTime | 1.3.6.1.4.1.3373.1103.80.13.1.5 | INTEGER | read-only | Radio branch RT loop test time percentage |
| INT radioRtPsuOff | 1.3.6.1.4.1.3373.1103.80.13.1.6 | INTEGER | read-write | It switches on/off the Rt power supply |
| INT radioLom | 1.3.6.1.4.1.3373.1103.80.13.1.7 | INTEGER | read-write | It is used to enable the IP packet forwarding towards Radio. |
| INT radioXpic | 1.3.6.1.4.1.3373.1103.80.13.1.8 | INTEGER | read-write | Enable of the cross polarization interference cancellation of this radio. The value disable is tied to a manual operation (ManOpRecord). This object is applicable only if thiis radio belongs to a 2+0 XPIC or 2+2 XPIC link. |
| radioFrequencyTable | 1.3.6.1.4.1.3373.1103.80.14 | not-accessible | Availables channels for selected channel spacing and modulation (see leaf radioFreqTableSelection). | |
| radioFreqTabEntry | 1.3.6.1.4.1.3373.1103.80.14.1 | not-accessible | RadioFreqTab record. | |
| I32 radioFreqChannelId | 1.3.6.1.4.1.3373.1103.80.14.1.1 | Integer32 | read-only | Index of the table |
| I32 radioFreqChannelNum | 1.3.6.1.4.1.3373.1103.80.14.1.2 | Integer32 | read-only | Available channel number. |
| I32 radioFreqValue | 1.3.6.1.4.1.3373.1103.80.14.1.3 | Integer32 | read-only | Frequency related to radioFreqChannelNum. |
| radioDuplexFrequencyTable | 1.3.6.1.4.1.3373.1103.80.15 | not-accessible | Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. | |
| radioDuplexFreqEntry | 1.3.6.1.4.1.3373.1103.80.15.1 | not-accessible | Duplex Frequency entry. There is an entry for each available duplex frequency. | |
| I32 radioDuplexFreqId | 1.3.6.1.4.1.3373.1103.80.15.1.1 | Integer32 | read-only | Index of the table. |
| I32 radioDuplexFreqValue | 1.3.6.1.4.1.3373.1103.80.15.1.2 | Integer32 | read-only | Duplex frequency in KHz. |
| radioModulationTable | 1.3.6.1.4.1.3373.1103.80.16 | not-accessible | List of modulations related to channel spacing. | |
| radioModulationEntry | 1.3.6.1.4.1.3373.1103.80.16.1 | not-accessible | radioModulation record. | |
| CHA radioChannelSpacing | 1.3.6.1.4.1.3373.1103.80.16.1.1 | ChannelSpacing | read-only | This object identifies the channel spacing. |
| MOD radioModulationMap | 1.3.6.1.4.1.3373.1103.80.16.1.2 | ModulationMap | read-only | List of modulations in the radioChanSpacing |
| MOD radioRefModulationMap | 1.3.6.1.4.1.3373.1103.80.16.1.3 | ModulationMap | read-only | List of modulations that can be selected as reference in the radioChanSpacingId |
| linkStatusTable | 1.3.6.1.4.1.3373.1103.80.17 | not-accessible | Table with LinkStatusEntry. | |
| linkStatusEntry | 1.3.6.1.4.1.3373.1103.80.17.1 | not-accessible | Link status entry | |
| INT linkPolIndex | 1.3.6.1.4.1.3373.1103.80.17.1.1 | INTEGER | read-only | This object identifies the radio polarization. In XPIC radio link identifies one of the polarizations. |
| I32 linkAcmRxProfile | 1.3.6.1.4.1.3373.1103.80.17.1.2 | Integer32 | read-only | This object reports the ACM profile number in use in the radio Rx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable |
| I32 linkAcmTxProfile | 1.3.6.1.4.1.3373.1103.80.17.1.3 | Integer32 | read-only | This object reports the ACM profile number in use in the radio Tx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable |
| STR linkAcmRxProfileLabel | 1.3.6.1.4.1.3373.1103.80.17.1.4 | DisplayString | read-only | ASCII string used to describe current acm rx profile |
| STR linkAcmTxProfileLabel | 1.3.6.1.4.1.3373.1103.80.17.1.5 | DisplayString | read-only | ASCII string used to describe current acm tx profile |
| BIT linkAcmRxModulation | 1.3.6.1.4.1.3373.1103.80.17.1.6 | BitsPerSymbol | read-only | This object is the type of modulation of the Rx profile in use. |
| BIT linkAcmTxModulation | 1.3.6.1.4.1.3373.1103.80.17.1.7 | BitsPerSymbol | read-only | This object is the type of modulation of the Tx profile in use. |
| INT linkAcmRxCode | 1.3.6.1.4.1.3373.1103.80.17.1.8 | INTEGER | read-only | This object is the type of codificator of the Rx profile in use. |
| INT linkAcmTxCode | 1.3.6.1.4.1.3373.1103.80.17.1.9 | INTEGER | read-only | This object is the type of codificator of the Tx profile in use. |
| I32 linkTxETHCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.10 | Integer32 | read-only | This object reports (in Kbits/sec) the transmitted payload capacity used by the Ethernet |
| I32 linkRxETHCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.11 | Integer32 | read-only | This object reports (in Kbits/sec) the received payload capacity used by the Ethernet |
| I32 linkTxTDMCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.12 | Integer32 | read-only | This object reports the capacity in kbit/sec reserved to TDM tributaries in tx ACM profile. |
| I32 linkRxTDMCapacity | 1.3.6.1.4.1.3373.1103.80.17.1.13 | Integer32 | read-only | This object reports the capacity in kbit/sec reserved to TDM tributaries in rx ACM profile. |
| BIT linkRescueModulation | 1.3.6.1.4.1.3373.1103.80.17.1.14 | BitsPerSymbol | read-only | This object is the modulation used when the remote terminal is unreachable, ie traffic on radio link is down. |
| ALA linkReducedCapacityAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.15 | AlarmStatus | read-only | The equipment works in reduced capacity |
| ALA linkLinkTelemetryFailAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.16 | AlarmStatus | read-only | Fail of link telemetry communication channel with associated Severity |
| ALA linkIdMismatchAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.17 | AlarmStatus | read-only | Link Identification Alarm with associated Severity |
| ALA linkRadioEocAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.18 | AlarmStatus | read-only | Fail of Radio Eoc link communication channel with associated Severity |
| ALA linkSetupMismatchAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.19 | AlarmStatus | read-only | The local setup doesn't match the setup of remote terminal |
| ALA linkRescueSetupAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.20 | AlarmStatus | read-only | The equipment is using the setup relative to the rescue modulation |
| ALA linkXpicProcedureBlockAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.21 | AlarmStatus | read-only | Only for XPIC equipment configurations. Equipment Controller XPIC procedure Alarm control with associated Severity |
| ALA linkXpicRemTxOffAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.22 | AlarmStatus | read-only | Only for XPIC equipment configurations. Remote TX OFF command with associated Severity |
| ALA linkRemoteIduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.17.1.23 | AlarmStatus | read-only | Synthesis of the remote IDU alarms |
| ALA linkNotMatchingRadiosAlarm | 1.3.6.1.4.1.3373.1103.80.17.1.24 | AlarmStatus | read-only | Radios of the link does not have matched parameters. |
| INT linkConfigurationInProgress | 1.3.6.1.4.1.3373.1103.80.17.1.25 | INTEGER | read-only | The link is being configured and the table linkSettingsTable is not available for modifying parameters. |
| I32 linkXpd | 1.3.6.1.4.1.3373.1103.80.17.1.26 | Integer32 | read-only | Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polarized signal. This object shows an extimated value of the XPD performed by the cross-polarization interference canceller (XPIC). This means that the measure is reliable if: - XPIC is on (linkType is radio2p0Xpic(4), or radio2p2XpicHS(5), or radio2p2XpicFD(6)) - Alarm radioDemodulatorFailAlarm is cleared. - XPD is not too high, since without cross-polar interference the canceller is not able to works well. Basically, in this condition, the extimated XPD is greater than the real one. |
| linkTfcTable | 1.3.6.1.4.1.3373.1103.80.18 | not-accessible | Transmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter switch. This table was deprecated and replaced by linkTfcV2Table. It is a view of the rows of the linkTfcV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managers. | |
| linkTfcEntry | 1.3.6.1.4.1.3373.1103.80.18.1 | not-accessible | Radio link TFC entry. | |
| INT linkTfcAction | 1.3.6.1.4.1.3373.1103.80.18.1.1 | INTEGER | read-create | reset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| INT linkTfcControl | 1.3.6.1.4.1.3373.1103.80.18.1.2 | INTEGER | read-create | It enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system). |
| INT linkTfcWatchWindow | 1.3.6.1.4.1.3373.1103.80.18.1.3 | INTEGER | read-create | Watch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| INT linkTfcAlarmThreshold | 1.3.6.1.4.1.3373.1103.80.18.1.4 | INTEGER | read-create | Alarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| ALA linkTfcAlarm | 1.3.6.1.4.1.3373.1103.80.18.1.5 | AlarmStatus | read-only | Transmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| ROW linkTfcRowStatus | 1.3.6.1.4.1.3373.1103.80.18.1.6 | RowStatus | read-create | Status of this conceptual row in linkTfcTable. |
| linkMaintTable | 1.3.6.1.4.1.3373.1103.80.19 | not-accessible | Table with commands for maintenance of radio link. Objects in this table is not persistent. An Instance of this table is created on creation of linkStatusEntry | |
| linkMaintEntry | 1.3.6.1.4.1.3373.1103.80.19.1 | not-accessible | Radio link maintenance entry. | |
| INT linkBerStart | 1.3.6.1.4.1.3373.1103.80.19.1.1 | INTEGER | read-write | Stop, Start (resetting errors and counters) the pattern. This item is linked to a manual operation (ManOpRecord) instance. |
| INT linkBaseBandLom | 1.3.6.1.4.1.3373.1103.80.19.1.2 | INTEGER | read-write | It is used to enable the IP packet forwarding towards modems. This item is linked to a manual operation (ManOpRecord) instance. |
| INT linkFadeMarginMeasure | 1.3.6.1.4.1.3373.1103.80.19.1.3 | INTEGER | read-write | Set by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance. This object is deprecated and replaced by fadeMarginMeasure. |
| INT linkXpicControlProcedureReset | 1.3.6.1.4.1.3373.1103.80.19.1.4 | INTEGER | read-write | Set by manager to reset the XPIC control procedure after a blocking action. |
| linkBerTable | 1.3.6.1.4.1.3373.1103.80.20 | not-accessible | Table with Command to estimate BER of radio equipment. Every objects in this table is not persistent. An Instance of this table is created on creation of linkStatusEntry | |
| linkBerEntry | 1.3.6.1.4.1.3373.1103.80.20.1 | not-accessible | Radio equipment BER estimate record. | |
| C32 linkBerErrorCounterH | 1.3.6.1.4.1.3373.1103.80.20.1.1 | Counter32 | read-only | High 32 bit part of the 64 bit error counter. Bit 32-63. |
| C32 linkBerErrorCounterL | 1.3.6.1.4.1.3373.1103.80.20.1.2 | Counter32 | read-only | Low 32 bit part of the 64 bit error counter. Bit 0-31. |
| C32 linkBerDataCounterH | 1.3.6.1.4.1.3373.1103.80.20.1.3 | Counter32 | read-only | High 32 bit part of the 64 bit data counter. Bit 32-63. |
| C32 linkBerDataCounterL | 1.3.6.1.4.1.3373.1103.80.20.1.4 | Counter32 | read-only | Low 32 bit part of the 64 bit data counter. Bit 0-31. |
| ALA linkBerSyncLossAlarm | 1.3.6.1.4.1.3373.1103.80.20.1.5 | AlarmStatus | read-only | BER sync loss alarm. |
| I32 linkBerSyncLossAlarmCounter | 1.3.6.1.4.1.3373.1103.80.20.1.6 | Integer32 | read-only | BER sync loss events counter. |
| I32 linkBerElapsedTime | 1.3.6.1.4.1.3373.1103.80.20.1.7 | Integer32 | read-only | BER measure elapsed time. |
| linkAcmTable | 1.3.6.1.4.1.3373.1103.80.21 | not-accessible | Table with link records. | |
| linkAcmEntry | 1.3.6.1.4.1.3373.1103.80.21.1 | not-accessible | ACM entries. | |
| I32 linkAcmProfileId | 1.3.6.1.4.1.3373.1103.80.21.1.1 | Integer32 | read-only | This object identifies the profile number for the radio selected by the object linkAcmId. |
| BIT linkAcmProfileModulation | 1.3.6.1.4.1.3373.1103.80.21.1.2 | BitsPerSymbol | read-only | This object is the modulation of the profile. |
| INT linkAcmProfileCode | 1.3.6.1.4.1.3373.1103.80.21.1.3 | INTEGER | read-only | This object is the type of codificator of the profile. |
| I32 linkAcmProfileCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.4 | Integer32 | read-only | This object is used to contain total capacity of profile (in kbits/sec). |
| STR linkAcmProfileLabel | 1.3.6.1.4.1.3373.1103.80.21.1.5 | DisplayString | read-write | ASCII string used to assign a name to profile. |
| INT linkAcmProfileEnable | 1.3.6.1.4.1.3373.1103.80.21.1.6 | INTEGER | read-only | The object is used to contain if the use of this profile is enabled or disabled |
| I32 linkAcmMaxTDMCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.7 | Integer32 | read-only | This object reports the maximum capacity that can be assigned to the TDM traffic. The capacity is specified in number of E1 (2Mbit/s). This object has been superseded by linkE1vsSTM1CapacityTable. |
| I32 linkAcmPowerScaling | 1.3.6.1.4.1.3373.1103.80.21.1.8 | Integer32 | read-only | This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable. This object is deprecated: see combinedRadioPowerScalingTable. |
| I32 linkAcmDownshiftThreshold | 1.3.6.1.4.1.3373.1103.80.21.1.9 | Integer32 | read-only | The object is used to contain the downshift threshold in dB/10. |
| I32 linkAcmUpshiftThreshold | 1.3.6.1.4.1.3373.1103.80.21.1.10 | Integer32 | read-only | The object is used to contain the upshift threshold in dB/10. |
| INT linkAcmActiveProfile | 1.3.6.1.4.1.3373.1103.80.21.1.11 | INTEGER | read-only | This object is used to contain the active status of this profile. The value of the object is related to linkAcmRxProfile and linkAcmTxProfile of the LinkStatusEntry. |
| I32 linkAcmTDMCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.12 | Integer32 | read-only | This object reports current TDM capacity (in kbits/sec) of the profile. |
| I32 linkAcmETHCapacity | 1.3.6.1.4.1.3373.1103.80.21.1.13 | Integer32 | read-only | This object reports current ETH capacity (in Kbits/sec) of the profile. |
| I32 linkAcmAtpcRxPowerScaling | 1.3.6.1.4.1.3373.1103.80.21.1.14 | Integer32 | read-only | This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation. This object is deprecated: see combinedRadioPowerScalingTable. |
| I32 linkAcmPowerRange | 1.3.6.1.4.1.3373.1103.80.21.1.15 | Integer32 | read-only | This object contains (in dB) the current value of ATPC range. This object is deprecated: see combinedRadioPowerScalingTable. |
| linkProTable | 1.3.6.1.4.1.3373.1103.80.22 | not-accessible | A list of protection link entries. This table was deprecated and replaced by linkProV2Table. It is a view of the rows of the linkProV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managers | |
| linkProEntry | 1.3.6.1.4.1.3373.1103.80.22.1 | not-accessible | An entry containing management information applicable to a protected link. | |
| I32 linkProProtectionTxChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.1 | Integer32 | read-create | This object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. |
| I32 linkProProtectionRxChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.2 | Integer32 | read-create | This object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. |
| INT linkProTxWtrTime | 1.3.6.1.4.1.3373.1103.80.22.1.3 | INTEGER | read-create | It defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. |
| INT linkProRxWtrTime | 1.3.6.1.4.1.3373.1103.80.22.1.4 | INTEGER | read-create | It defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. |
| I32 linkProTxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.5 | Integer32 | read-only | This object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema. |
| I32 linkProRxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.22.1.6 | Integer32 | read-only | This object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema. |
| INT linkProTxRevertive | 1.3.6.1.4.1.3373.1103.80.22.1.7 | INTEGER | read-create | It defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| INT linkProRxRevertive | 1.3.6.1.4.1.3373.1103.80.22.1.8 | INTEGER | read-create | It defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| INT linkProExtraTraffic | 1.3.6.1.4.1.3373.1103.80.22.1.9 | INTEGER | read-create | This object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architectures different for N+1. |
| ROW linkProRowStatus | 1.3.6.1.4.1.3373.1103.80.22.1.10 | RowStatus | read-create | Status of this conceptual row in linkProTable. |
| linkProMaintTable | 1.3.6.1.4.1.3373.1103.80.23 | not-accessible | A list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProTable. This table was deprecated and replaced by linkProMaintV2Table. It is a view of the rows of the linkProMaintV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managers | |
| linkProMaintEntry | 1.3.6.1.4.1.3373.1103.80.23.1 | not-accessible | An entry containing maintenance commands applicable to a protected link. | |
| INT linkProMaintTxLockout | 1.3.6.1.4.1.3373.1103.80.23.1.1 | INTEGER | read-write | Command to enable/disable tx lockout. This object is applicable only in case of N+1 protections. |
| INT linkProMaintRxLockout | 1.3.6.1.4.1.3373.1103.80.23.1.2 | INTEGER | read-write | Command to enable/disable rx lockout. This object is applicable only in case of N+1 protections. |
| I32 linkProMaintTxForced | 1.3.6.1.4.1.3373.1103.80.23.1.3 | Integer32 | read-write | Command to force switch to a given transmission channel. Zero value means no switch. |
| I32 linkProMaintRxForced | 1.3.6.1.4.1.3373.1103.80.23.1.4 | Integer32 | read-write | Command to force switch to a given receiving channel. Zero value means no switch. |
| INT linkProMaintTxWtrReset | 1.3.6.1.4.1.3373.1103.80.23.1.5 | INTEGER | read-write | Clear wait time to restore making the revertive path immediately available. |
| INT linkProMaintRxWtrReset | 1.3.6.1.4.1.3373.1103.80.23.1.6 | INTEGER | read-write | Clear wait time to restore making the revertive path immediately available. |
| linkCapabilitiesTable | 1.3.6.1.4.1.3373.1103.80.24 | not-accessible | Table with RadioCapabilities entries: there is an entry for each linkTable row. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the capabilities of each channel. As such, this table is declared deprecated and replaced by combinedRadioCapabilitiesTable. | |
| linkCapabilitiesEntry | 1.3.6.1.4.1.3373.1103.80.24.1 | not-accessible | LinkCapabilities entry. | |
| RAD linkCapabilitiesCapability | 1.3.6.1.4.1.3373.1103.80.24.1.1 | RadioCapability | read-only | Bit map to describe the radio features. |
| I32 linkCapabilitiesTxMinFrequency | 1.3.6.1.4.1.3373.1103.80.24.1.2 | Integer32 | read-only | Minimum of available channel frequency in KHz. |
| I32 linkCapabilitiesTxMaxFrequency | 1.3.6.1.4.1.3373.1103.80.24.1.3 | Integer32 | read-only | Maximum of available channel frequency in KHz. |
| I32 linkCapabilitiesStepFrequency | 1.3.6.1.4.1.3373.1103.80.24.1.4 | Integer32 | read-only | Minimum frequency step in KHz. |
| I32 linkCapabilitiesMinPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.24.1.5 | Integer32 | read-only | Minimum nominal Ptx in dBm. |
| I32 linkCapabilitiesMaxPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.24.1.6 | Integer32 | read-only | Maximum nominal Ptx in dBm. |
| I32 linkCapabilitiesExtendedMinPwr | 1.3.6.1.4.1.3373.1103.80.24.1.7 | Integer32 | read-only | Minimum extended Ptx power for fade margin. |
| linkFrequencyTable | 1.3.6.1.4.1.3373.1103.80.25 | not-accessible | Availables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the allowable frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioFrequencyTable. | |
| linkFreqTabEntry | 1.3.6.1.4.1.3373.1103.80.25.1 | not-accessible | LinkFreqTab record. | |
| I32 linkFreqChannelId | 1.3.6.1.4.1.3373.1103.80.25.1.1 | Integer32 | read-only | Index of the table |
| I32 linkFreqChannelNum | 1.3.6.1.4.1.3373.1103.80.25.1.2 | Integer32 | read-only | Available channel number. |
| I32 linkFreqValue | 1.3.6.1.4.1.3373.1103.80.25.1.3 | Integer32 | read-only | Frequency related to linkFreqChannelNum. |
| linkDuplexFrequencyTable | 1.3.6.1.4.1.3373.1103.80.26 | not-accessible | Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the allowable duplex frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioDuplexFrequencyTable. | |
| linkDuplexFreqEntry | 1.3.6.1.4.1.3373.1103.80.26.1 | not-accessible | Duplex Frequency entry. For each available duplex frequency | |
| I32 linkDuplexFreqId | 1.3.6.1.4.1.3373.1103.80.26.1.1 | Integer32 | read-only | Index of the table. |
| I32 linkDuplexFreqValue | 1.3.6.1.4.1.3373.1103.80.26.1.2 | Integer32 | read-only | Duplex frequency in KHz. |
| linkModulationTable | 1.3.6.1.4.1.3373.1103.80.27 | not-accessible | List of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |
| linkModulationEntry | 1.3.6.1.4.1.3373.1103.80.27.1 | not-accessible | linkModulation record. | |
| CHA linkChannelSpacing | 1.3.6.1.4.1.3373.1103.80.27.1.1 | ChannelSpacing | read-only | This object identifies the channel spacing. |
| MOD linkModulationMap | 1.3.6.1.4.1.3373.1103.80.27.1.2 | ModulationMap | read-only | List of modulation in the linkChanSpacing |
| MOD linkRefModulationMap | 1.3.6.1.4.1.3373.1103.80.27.1.3 | ModulationMap | read-only | List of modulations that can be selected as reference in the linkChanSpacingId |
| combinedRadioCapabilitiesTable | 1.3.6.1.4.1.3373.1103.80.28 | not-accessible | Table with RadioCapabilities entries: there is an entry for each radioSettingTable row. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios belonging to the link. In 1+1 FD radio link, managers have to know the allowable duplex frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioCapabilitiesTable. | |
| combinedRadioCapabilitiesEntry | 1.3.6.1.4.1.3373.1103.80.28.1 | not-accessible | combinedRadioCapabilities entry. | |
| RAD combinedRadioCapabilitiesCapability | 1.3.6.1.4.1.3373.1103.80.28.1.1 | RadioCapability | read-only | Bit map to describe the radio features. |
| I32 combinedRadioCapabilitiesTxMinFrequency | 1.3.6.1.4.1.3373.1103.80.28.1.2 | Integer32 | read-only | Minimum of available channel frequency in KHz. |
| I32 combinedRadioCapabilitiesTxMaxFrequency | 1.3.6.1.4.1.3373.1103.80.28.1.3 | Integer32 | read-only | Maximum of available channel frequency in KHz. |
| I32 combinedRadioCapabilitiesStepFrequency | 1.3.6.1.4.1.3373.1103.80.28.1.4 | Integer32 | read-only | Minimum frequency step in KHz. |
| I32 combinedRadioCapabilitiesMinPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.28.1.5 | Integer32 | read-only | Minimum nominal Ptx in dBm. |
| I32 combinedRadioCapabilitiesMaxPtxNominalValue | 1.3.6.1.4.1.3373.1103.80.28.1.6 | Integer32 | read-only | Maximum nominal Ptx in dBm. |
| I32 combinedRadioCapabilitiesExtendedMinPwr | 1.3.6.1.4.1.3373.1103.80.28.1.7 | Integer32 | read-only | Minimum extended Ptx power for fade margin. |
| combinedRadioFrequencyTable | 1.3.6.1.4.1.3373.1103.80.29 | not-accessible | Availables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |
| combinedRadioFreqTabEntry | 1.3.6.1.4.1.3373.1103.80.29.1 | not-accessible | combinedRadioFreqTab record. | |
| I32 combinedRadioFreqChannelId | 1.3.6.1.4.1.3373.1103.80.29.1.1 | Integer32 | read-only | Index of the table |
| I32 combinedRadioFreqChannelNum | 1.3.6.1.4.1.3373.1103.80.29.1.2 | Integer32 | read-only | Available channel number. |
| I32 combinedRadioFreqValue | 1.3.6.1.4.1.3373.1103.80.29.1.3 | Integer32 | read-only | Frequency related to combinedRadioFreqChannelNum. |
| combinedRadioDuplexFrequencyTable | 1.3.6.1.4.1.3373.1103.80.30 | not-accessible | Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |
| combinedRadioDuplexFreqEntry | 1.3.6.1.4.1.3373.1103.80.30.1 | not-accessible | Duplex Frequency entry. There is an entry for each available duplex frequency. | |
| I32 combinedRadioDuplexFreqId | 1.3.6.1.4.1.3373.1103.80.30.1.1 | Integer32 | read-only | Index of the table. |
| I32 combinedRadioDuplexFreqValue | 1.3.6.1.4.1.3373.1103.80.30.1.2 | Integer32 | read-only | Duplex frequency in KHz. |
| combinedRadioPowerScalingTable | 1.3.6.1.4.1.3373.1103.80.31 | not-accessible | List of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. | |
| combinedRadioPowerScalingEntry | 1.3.6.1.4.1.3373.1103.80.31.1 | not-accessible | radioPowerScaling record. | |
| I32 combinedRadioPowerScaling | 1.3.6.1.4.1.3373.1103.80.31.1.1 | Integer32 | read-only | This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable. |
| I32 combinedRadioAtpcRxPowerScaling | 1.3.6.1.4.1.3373.1103.80.31.1.2 | Integer32 | read-only | This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation. |
| I32 combinedRadioPowerRange | 1.3.6.1.4.1.3373.1103.80.31.1.3 | Integer32 | read-only | This object contains (in dB) the current value of ATPC range. |
| stm1BulkMappingTable | 1.3.6.1.4.1.3373.1103.80.32 | not-accessible | Table with entries containing stm-1 bulk transport parameters for a particular link. For each link are present as many rows as the STM-1 that the link can carry in bulk mode. | |
| stm1BulkMappingEntry | 1.3.6.1.4.1.3373.1103.80.32.1 | not-accessible | An row in stm1BulkSettingsTable. | |
| I32 stm1BulkPolIndex | 1.3.6.1.4.1.3373.1103.80.32.1.1 | Integer32 | read-only | Polarization index. |
| I32 stm1BulkChanIndex | 1.3.6.1.4.1.3373.1103.80.32.1.2 | Integer32 | read-only | STM-1 channel index. The range of this object is from 1 to N, where N is the number of STM-1 that a link can carry in bulk mode. |
| STM stm1BulkChannel | 1.3.6.1.4.1.3373.1103.80.32.1.3 | Stm1IndexOrZero | read-write | Index of the stm-1 in stm1Table. The SNMP agent will accept only index of a STM-1 present in stm1Table with stm1Structure set to opaque(4). |
| linkE1vsSTM1CapacityTable | 1.3.6.1.4.1.3373.1103.80.33 | not-accessible | Table with entries containing the E1 cpacity according to the tributaries STM-1 configured to be carried in bulk mode. | |
| linkE1vsSTM1CapacityEntry | 1.3.6.1.4.1.3373.1103.80.33.1 | not-accessible | An row in linkE1vsSTM1CapacityTable. | |
| I32 linkE1vsSTM1CapacityStm1 | 1.3.6.1.4.1.3373.1103.80.33.1.1 | Integer32 | not-accessible | Number of tributaries STM-1 configured to be transported in bulk mode. |
| I32 linkE1vsSTM1CapacityE1 | 1.3.6.1.4.1.3373.1103.80.33.1.2 | Integer32 | read-only | Number of E1 that can be carried by this profile according to the the tributaries STM-1 carried in bulk mode. |
| linkTfcV2Table | 1.3.6.1.4.1.3373.1103.80.34 | not-accessible | Transmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter switch. | |
| linkTfcV2Entry | 1.3.6.1.4.1.3373.1103.80.34.1 | not-accessible | Radio link TFC entry. | |
| INT linkTfcV2Action | 1.3.6.1.4.1.3373.1103.80.34.1.1 | INTEGER | read-create | reset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| INT linkTfcV2Control | 1.3.6.1.4.1.3373.1103.80.34.1.2 | INTEGER | read-create | It enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system). |
| INT linkTfcV2WatchWindow | 1.3.6.1.4.1.3373.1103.80.34.1.3 | INTEGER | read-create | Watch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| INT linkTfcV2AlarmThreshold | 1.3.6.1.4.1.3373.1103.80.34.1.4 | INTEGER | read-create | Alarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| ALA linkTfcV2Alarm | 1.3.6.1.4.1.3373.1103.80.34.1.5 | AlarmStatus | read-only | Transmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| ROW linkTfcV2RowStatus | 1.3.6.1.4.1.3373.1103.80.34.1.6 | RowStatus | read-create | Status of this conceptual row in linkTfcV2Table. |
| linkProV2Table | 1.3.6.1.4.1.3373.1103.80.35 | not-accessible | A list of protection link entries. | |
| linkProV2Entry | 1.3.6.1.4.1.3373.1103.80.35.1 | not-accessible | An entry containing management information applicable to a protected link. | |
| I32 linkProV2ProtectionTxChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.1 | Integer32 | read-create | This object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. |
| I32 linkProV2ProtectionRxChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.2 | Integer32 | read-create | This object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set. |
| INT linkProV2TxWtrTime | 1.3.6.1.4.1.3373.1103.80.35.1.3 | INTEGER | read-create | It defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. |
| INT linkProV2RxWtrTime | 1.3.6.1.4.1.3373.1103.80.35.1.4 | INTEGER | read-create | It defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set. |
| I32 linkProV2TxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.5 | Integer32 | read-only | This object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema. |
| I32 linkProV2RxSwitchedChIdx | 1.3.6.1.4.1.3373.1103.80.35.1.6 | Integer32 | read-only | This object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema. |
| INT linkProV2TxRevertive | 1.3.6.1.4.1.3373.1103.80.35.1.7 | INTEGER | read-create | It defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| INT linkProV2RxRevertive | 1.3.6.1.4.1.3373.1103.80.35.1.8 | INTEGER | read-create | It defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| INT linkProV2ExtraTraffic | 1.3.6.1.4.1.3373.1103.80.35.1.9 | INTEGER | read-create | This object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architectures different for N+1. |
| ROW linkProV2RowStatus | 1.3.6.1.4.1.3373.1103.80.35.1.10 | RowStatus | read-create | Status of this conceptual row in linkProV2Table. |
| linkProMaintV2Table | 1.3.6.1.4.1.3373.1103.80.36 | not-accessible | A list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProV2Table. | |
| linkProMaintV2Entry | 1.3.6.1.4.1.3373.1103.80.36.1 | not-accessible | An entry containing maintenance commands applicable to a protected link. | |
| INT linkProMaintV2TxLockout | 1.3.6.1.4.1.3373.1103.80.36.1.1 | INTEGER | read-write | Command to enable/disable tx lockout. This object is applicable only in case of N+1 protections. |
| INT linkProMaintV2RxLockout | 1.3.6.1.4.1.3373.1103.80.36.1.2 | INTEGER | read-write | Command to enable/disable rx lockout. This object is applicable only in case of N+1 protections. |
| I32 linkProMaintV2TxForced | 1.3.6.1.4.1.3373.1103.80.36.1.3 | Integer32 | read-write | Command to force switch to a given transmission channel. Zero value means no switch. |
| I32 linkProMaintV2RxForced | 1.3.6.1.4.1.3373.1103.80.36.1.4 | Integer32 | read-write | Command to force switch to a given receiving channel. Zero value means no switch. |
| INT linkProMaintV2TxWtrReset | 1.3.6.1.4.1.3373.1103.80.36.1.5 | INTEGER | read-write | Clear wait time to restore making the revertive path immediately available. |
| INT linkProMaintV2RxWtrReset | 1.3.6.1.4.1.3373.1103.80.36.1.6 | INTEGER | read-write | Clear wait time to restore making the revertive path immediately available. |
| sspTable | 1.3.6.1.4.1.3373.1103.80.37 | not-accessible | A list of operative and administrative set of parameters. This table holds three row for every link (and its polarizations) configured in the NE: 1) administative parameters of local NE 2) operative parameters of local NE 3) administative parameters of remote NE | |
| sspEntry | 1.3.6.1.4.1.3373.1103.80.37.1 | not-accessible | An entry containing SSP relevant parameters. | |
| INT sspParameterType | 1.3.6.1.4.1.3373.1103.80.37.1.1 | INTEGER | not-accessible | This object identifies what parameters are for. |
| INT sspLinkBandwidth | 1.3.6.1.4.1.3373.1103.80.37.1.2 | INTEGER | read-only | Link Bandwidth (channel spacing). |
| INT sspLinkModulation | 1.3.6.1.4.1.3373.1103.80.37.1.3 | INTEGER | read-only | Link reference modulation. |
| INT sspLinkAcmEngineEnable | 1.3.6.1.4.1.3373.1103.80.37.1.4 | INTEGER | read-only | This object is used to enable/disable the ACM engine. |
| INT sspLinkTxUpperProfile | 1.3.6.1.4.1.3373.1103.80.37.1.5 | INTEGER | read-only | The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled. |
| INT sspLinkTxLowerProfile | 1.3.6.1.4.1.3373.1103.80.37.1.6 | INTEGER | read-only | The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled. |
| INT sspLinkSynchSetupProtocolEnable | 1.3.6.1.4.1.3373.1103.80.37.1.7 | INTEGER | read-only | Synchronization Setup Protocol (SSP) control. |
| INT sspLinkProfilesSetSelection | 1.3.6.1.4.1.3373.1103.80.37.1.8 | INTEGER | read-only | Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greater robustness against to the set of profiles high throughput. For radio systems that do not have more sets of profiles, this object becomes read only and its reading shows the only one set of profiles supported. |
| I32 sspTdmE1Channel | 1.3.6.1.4.1.3373.1103.80.37.1.9 | Integer32 | read-only | Number of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mbit/s). |
| I32 sspTdmStm1Channel | 1.3.6.1.4.1.3373.1103.80.37.1.10 | Integer32 | read-only | Number of STM-1 channels transported in bulk mode. |
| radioLoopCapabilityTable | 1.3.6.1.4.1.3373.1103.80.38 | not-accessible | This table shows which group a radio loop belongs to. Radios with the same group number (identifier) close loop simultaneously. | |
| radioLoopCapabilityEntry | 1.3.6.1.4.1.3373.1103.80.38.1 | not-accessible | An entry containing a group identifier for each radio loop type. | |
| I32 radioLoopRfGroup | 1.3.6.1.4.1.3373.1103.80.38.1.1 | Integer32 | read-only | The group to which the radio RF loop belong to. |
| I32 radioLoopIqGroup | 1.3.6.1.4.1.3373.1103.80.38.1.2 | Integer32 | read-only | The group to which the radio IQ loop belong to. |
| I32 radioLoopBaseBandGroup | 1.3.6.1.4.1.3373.1103.80.38.1.3 | Integer32 | read-only | The group to which the radio base loop belong to. |
| radioRxBerThresholdTable | 1.3.6.1.4.1.3373.1103.80.39 | not-accessible | This table shows the nominal and measured values of RX power at a bit error rate (BER) equal to 10e-6. | |
| radioRxBerThresholdEntry | 1.3.6.1.4.1.3373.1103.80.39.1 | not-accessible | An entry containing the RX power thresholds. | |
| INT radioRxBerThresholdStatus | 1.3.6.1.4.1.3373.1103.80.39.1.1 | INTEGER | read-only | This object shows whether the following objects are significant. |
| I32 radioNominalRxBerThreshold | 1.3.6.1.4.1.3373.1103.80.39.1.2 | Integer32 | read-only | The nominal value of RX power @ BER equal to 10e-6 |
| I32 radioMeasuredRxBerThreshold | 1.3.6.1.4.1.3373.1103.80.39.1.3 | Integer32 | read-only | The measured value of RX power @ BER equal to 10e-6. |
| ALA radioRemDemodulatorFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.50 | AlarmSeverityCode | read-write | Defines the severity associated to the radioRemDemodulatorFailAlarm and enables/disables the trap generation on status change event. |
| INT radioRxActiveStatusTrapNotification | 1.3.6.1.4.1.3373.1103.80.51 | INTEGER | read-write | Enable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for radioRxActivestatus |
| INT radioTxActiveStatusTrapNotification | 1.3.6.1.4.1.3373.1103.80.52 | INTEGER | read-write | Define the severity associated to the radioTxActivestatus and enable/disable the trap generation on status change event. |
| ALA radioCableOpenAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.53 | AlarmSeverityCode | read-write | Defines the severity associated to the radioCableOpen and enables/disables the trap generation on status change event. |
| ALA radioCableShortAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.54 | AlarmSeverityCode | read-write | Defines the severity associated to the radioCableShort and enables/disables the trap generation on status change event. |
| ALA radioInvalidFrequencyAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.55 | AlarmSeverityCode | read-write | Defines the severity associated to the radioInvalidFrequencyAlarm and enables/disables the trap generation on status change event. |
| ALA radioBaseBandRxAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.56 | AlarmSeverityCode | read-write | Defines the severity associated to the radioBaseBandRxAlarm and enables/disables the trap generation on status change event. |
| ALA radioModulatorFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.57 | AlarmSeverityCode | read-write | Defines the severity associated to the radioModulatorFailAlarm and enables/disables the trap generation on status change event. |
| ALA radioDemodulatorFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.58 | AlarmSeverityCode | read-write | Defines the severity associated to the radioDemodulatorFailAlarm and enables/disables the trap generation on status change event. |
| ALA radioRxPowerLowAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.59 | AlarmSeverityCode | read-write | Defines the severity associated to the radioRxPowerLowAlarm and enables/disables the trap generation on status change event. |
| ALA radioTxPowerLowAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.60 | AlarmSeverityCode | read-write | Defines the severity associated to the radioTxPowerLowAlarm and enables/disables the trap generation on status change event. |
| ALA radioVcoFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.61 | AlarmSeverityCode | read-write | Defines the severity associated to the radioVcoFailAlarm and enables/disables the trap generation on status change event. |
| ALA radioRxIFAgcAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.62 | AlarmSeverityCode | read-write | Defines the severity associated to the radioRxIFAgcAlarm and enables/disables the trap generation on status change event. |
| ALA radioTxIFAgcAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.63 | AlarmSeverityCode | read-write | Defines the severity associated to the radioTxIFAgcAlarm and enables/disables the trap generation on status change event. |
| ALA radioIduOduCommunicationAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.64 | AlarmSeverityCode | read-write | Define the severity associated to the radioIduOduCommunicationAlarm and enable/disable the trap generation on status change event. |
| ALA radioOduIduCommunicationAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.65 | AlarmSeverityCode | read-write | Define the severity associated to the radioOduIduCommunicationAlarm and enable/disable the trap generation on status change event. |
| ALA radioLocalOduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.66 | AlarmSeverityCode | read-write | Define the severity associated to the radioLocalOduAlarmSynthesis and enable/disable the trap generation on status change event. |
| ALA radioRemoteOduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.67 | AlarmSeverityCode | read-write | Define the severity associated to the radioRemoteOduAlarmSynthesis and enable/disable the trap generation on status change event. |
| ALA radioConfigMismatchAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.68 | AlarmSeverityCode | read-write | Defines the severity associated to the radioConfigMismatchAlarm and enables/disables the trap generation on status change event. |
| I32 radioPrxHysteresisValue | 1.3.6.1.4.1.3373.1103.80.69 | Integer32 | read-write | Defines the delta value associated to the radioPrx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed. |
| I32 radioPtxHysteresisValue | 1.3.6.1.4.1.3373.1103.80.70 | Integer32 | read-write | Defines the delta value associated to the radioPtx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed. |
| INT radioPrxHysteresisValueTrapNotification | 1.3.6.1.4.1.3373.1103.80.71 | INTEGER | read-write | Enables/disables the Rx change trap generation on status change event. |
| INT radioPtxHysteresisValueTrapNotification | 1.3.6.1.4.1.3373.1103.80.72 | INTEGER | read-write | Enables/disables the Tx change trap generation on status change event. |
| ALA radioRxQualityLowAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.73 | AlarmSeverityCode | read-write | Define the severity associated to the radioRxQualityLowAlarm and enable/disable the trap generation on status change event. |
| ALA radioRxQualityWarningAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.74 | AlarmSeverityCode | read-write | Define the severity associated to the radioRxQualityWarningAlarm and enable/disable the trap generation on status change event. |
| ALA linkReducedCapacityAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.75 | AlarmSeverityCode | read-write | Define the severity associated to the linkReducedCapacityAlarm and enable/disable the trap generation on status change event. |
| ALA linkLinkTelemetryFailAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.76 | AlarmSeverityCode | read-write | Define the severity associated to the linkLinkTelemetryFailAlarm and enable/disable the trap generation on status change event. |
| ALA linkIdMismatchAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.77 | AlarmSeverityCode | read-write | Define the severity associated to the linkIdMismatchAlarm and enable/disable the trap generation on status change event. |
| ALA linkRadioEocAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.78 | AlarmSeverityCode | read-write | Define the severity associated to the linkRadioEocAlarm and enable/disable the trap generation on status change event. |
| ALA linkSetupMismatchAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.79 | AlarmSeverityCode | read-write | Define the severity associated to the linkSetupMismatchAlarm and enable/disable the trap generation on status change event. |
| ALA linkRescueSetupAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.80 | AlarmSeverityCode | read-write | Define the severity associated to the linkRescueSetupAlarm and enable/disable the trap generation on status change event. |
| ALA linkXpicProcedureBlockAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.81 | AlarmSeverityCode | read-write | Define the severity associated to the linkXpicProcedureBlockAlarm and enable/disable the trap generation on status change event. |
| ALA linkXpicRemTxOffAlarmAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.82 | AlarmSeverityCode | read-write | Define the severity associated to the linkXpicRemTxOffAlarm and enable/disable the trap generation on status change event. |
| ALA linkLocalIduAlarmSynthesis | 1.3.6.1.4.1.3373.1103.80.83 | AlarmStatus | read-only | Synthesis of the local IDU alarms |
| ALA linkLocalIduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.84 | AlarmSeverityCode | read-write | Define the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event. |
| ALA linkRemoteIduAlarmSynthesisSeverityCode | 1.3.6.1.4.1.3373.1103.80.85 | AlarmSeverityCode | read-write | Define the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event. |
| ALA linkTfcAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.86 | AlarmSeverityCode | read-write | Define the severity associated to the linkTfcV2Alarm (linkTfcAlarm) and enable/disable the trap generation on status change event. |
| ALA linkBerSyncLossAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.87 | AlarmSeverityCode | read-write | Define the severity associated to the linkBerSyncLossAlarm and enable/disable the trap generation on status change event. |
| ALA linkNotMatchingRadiosAlarmSeverityCode | 1.3.6.1.4.1.3373.1103.80.88 | AlarmSeverityCode | read-write | Define the severity associated to the linkNotMatchingRadiosAlarm and enable/disable the trap generation on status change event. |
| BIT channelSpacingSelection | 1.3.6.1.4.1.3373.1103.80.89 | Bits | read-write | his object selects which channel spacings the radio link has to support: - etsi: Compliant with European Telecommunication Standards Institute - fcc: Compliant with Federal Communications Commission |
| INT fadeMarginMeasure | 1.3.6.1.4.1.3373.1103.80.90 | INTEGER | read-write | Set by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance. |
| INT linkConfigurationInProgressTrapNotification | 1.3.6.1.4.1.3373.1103.80.91 | INTEGER | read-write | Enable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for linkConfigurationInProgress |
RFC description
Radio System MIB for managing SIAE microwave radio link and channel configurations, status monitoring, and alarms.
Start monitoring SIAE MICROELETTRONICA microwave radio-link equipment (radio/XPIC pairing configuration/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.