SIAE-RADIO-SYSTEM-MIB :: linkXpd

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › SIAE-RADIO-SYSTEM-MIB › linkXpd

linkXpd

Module: SIAE-RADIO-SYSTEM-MIB

OID (symbolic): SIAE-RADIO-SYSTEM-MIB::linkXpd

OID (numeric): 1.3.6.1.4.1.3373.1103.80.17.1.26

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polarized signal. This object shows an extimated value of the XPD performed by the cross-polarization interference canceller (XPIC). This means that the measure is reliable if: - XPIC is on (linkType is radio2p0Xpic(4), or radio2p2XpicHS(5), or radio2p2XpicFD(6)) - Alarm radioDemodulatorFailAlarm is cleared. - XPD is not too high, since without cross-polar interference the canceller is not able to works well. Basically, in this condition, the extimated XPD is greater than the real one.

What is linkXpd?

Deprecated estimate of Cross-Polarization Discrimination in tenths of dB from the XPIC canceller, similar to the per-radio XPD object. It is reliable only with XPIC on and the demodulator alarm cleared, and reads high when cross-polar interference is small; use the per-radio object instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3373.1103.80.17.1.26
snmpwalk -v2c -c public <target> SIAE-RADIO-SYSTEM-MIB::linkXpd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3373.1103.80.17.1.26.1
snmpget -v2c -c public <target> SIAE-RADIO-SYSTEM-MIB::linkXpd.1

Start monitoring SIAE MICROELETTRONICA microwave radio-link equipment (radio/XPIC pairing configuration/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SIAE-RADIO-SYSTEM-MIB::linkXpd OID value, configure state conditions and alerts, and monitor any SIAE MICROELETTRONICA microwave radio-link equipment (radio/XPIC pairing configuration/status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3373siaeMicroelettronicaSpaSIAE-TREE-MIB
1.3.6.1.4.1.3373.1103siaeMibSIAE-TREE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3373.1103.80radioSystemSIAE-RADIO-SYSTEM-MIB
1.3.6.1.4.1.3373.1103.80.17linkStatusTableSIAE-RADIO-SYSTEM-MIB
1.3.6.1.4.1.3373.1103.80.17.1linkStatusEntrySIAE-RADIO-SYSTEM-MIB
1.3.6.1.4.1.3373.1103.80.17.1.26linkXpdSIAE-RADIO-SYSTEM-MIB