SAMSUNG-HOST-RESOURCES-EXT-MIB

All MIBs › SAMSUNG-HOST-RESOURCES-EXT-MIB

Organization: Samsung Corporation - SCMI Working Group

Last Updated: 1904-07-17

Category: Samsung Device Management, Storage and Host Resources

Description: Extends host resource management with Samsung-specific CPU, memory, and storage objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SAMSUNG-HOST-RESOURCES-EXT-MIB?

SAMSUNG-HOST-RESOURCES-EXT-MIB is a Samsung-specific extension to the IETF Host Resources MIB (RFC 2790), used on Samsung network-attached devices — most likely printers and multifunction devices given its explicit alignment with the Document Printing Application (DPA, ISO/IEC 10175) 'realization' model for physical and logical devices. It augments standard host-resource categories such as CPU, memory (storage), and installed device inventory with Samsung-specific detail rather than replacing them. Its stated purpose is squarely hardware/software status monitoring: it lets a management station read extended CPU load, memory/storage utilization, and per-device realization status (physical vs. logical), while explicitly cautioning that status must not be misleadingly "bubbled up" from physical devices to more abstract logical ones. It has a direct, explicit dependency on RFC 2790 (Host Resources MIB), which it augments and extends rather than duplicates. It is typically deployed on Samsung printers, MFPs, or other network-attached host systems to give administrators finer-grained resource visibility than the base Host Resources MIB alone provides. Engineers can download the SAMSUNG-HOST-RESOURCES-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SAMSUNG-HOST-RESOURCES-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Samsung network-attached printer/MFP
Samsung host system implementing Host Resources MIB

Monitoring Examples

No object or table names were captured in this extract, so a concrete object-level polling scenario can't be described from the sample; per the module description, however, an admin would use this MIB's extensions alongside the standard hrDeviceTable/hrStorageTable objects it augments to inspect a specific physical vs. logical device's realization state and extended CPU/memory/storage figures on a Samsung host system, watching for storage or memory exhaustion or a device dropping out of its expected realization.

What Can Be Monitored

extended CPU utilization
memory/storage utilization
physical vs. logical device realization status
installed device inventory

Imported Objects

From HOST-RESOURCES-MIB

hrDeviceIndex

OBJECT-TYPE

From SAMSUNG-COMMON-MIB

samsungCommonMIB

OBJECT-IDENTITY

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
scmHrDevCount	1.3.6.1.4.1.236.11.5.11.53.11
SCM scmHrDevCountColor	1.3.6.1.4.1.236.11.5.11.53.11.2.1.6	ScmHrDevCountColorTC	read-only	smcHrDevCount define items that are outside of the normal numeric range: other(-1), unknown(-2). single-color is defined for extension of color job count.
SCM scmHrDevCountDuplex	1.3.6.1.4.1.236.11.5.11.53.11.2.1.5	ScmHrDevCountDuplexTC	read-only	smcHrDevCount define items that are outside of the normal numeric range: other(-1), unknown(-2). samsung device suppor three duplex job type, simple, duplex, duplex(single).
scmHrDevCountEntry	1.3.6.1.4.1.236.11.5.11.53.11.2.1		not-accessible	An entry for a device alert which has been generated and recorded on this host system.
I32 scmHrDevCountIndex	1.3.6.1.4.1.236.11.5.11.53.11.2.1.1	Integer32	read-only	A unique value used by the host to identify this Count item. This value indicate index of usage count value. If host device supports three count value (total page count, total color print count, total mono print count), this device has three count value and index.
SCM scmHrDevCountJobType	1.3.6.1.4.1.236.11.5.11.53.11.2.1.2	ScmHrDevCountJobTypeTC	read-only	scmHrDevCount defines items that are outside of the normal numeric range: other(-1), unknown(-2). scm defines many a job type. but current samsung device supports counts of print, fax, copy and scan job. Thus, the other items is not used.
SCM scmHrDevCountMediaSize	1.3.6.1.4.1.236.11.5.11.53.11.2.1.3	ScmHrDevCountMediaSizeTC	read-only	smcHrDevCount defines items that are outside of the normal numeric range: other(-1), unknown(-2). scm defines many a size of media. But, We use 'small' or 'large' as media size so that application simply manage.
scmHrDevCountSimple	1.3.6.1.4.1.236.11.5.11.53.11.1
scmHrDevCountTable	1.3.6.1.4.1.236.11.5.11.53.11.2		not-accessible	Samsung Common Mib Host Resource Count MIB
SCM scmHrDevCountUnit	1.3.6.1.4.1.236.11.5.11.53.11.2.1.4	ScmHrDevCountUnitTC	read-only	smcHrDevCount define items that are outside of the normal numeric range: other(-1), unknown(-2). PWG define count unit in printer mib(RFC1759, RFC3805). Default value is sheet(8), but specifically use impression (for example OEM Model).
C32 scmHrDevCountValue	1.3.6.1.4.1.236.11.5.11.53.11.2.1.7	Counter32	read-only	Value of usage count.
scmHrDevInfoGroup	1.3.6.1.4.1.236.11.5.11.53.2.2.3			The Host Resources Extensions MIB Device Info Group
scmHrMIB	1.3.6.1.4.1.236.11.5.11.53			Version: 1.00 The MIB module for extended configuration and management of various host resources for network accessible host systems. This module augments and extends the original IETF Host Resources MIB (RFC 2790). Usage: This MIB module introduces support for the 'realization' of both 'physical' and 'logical' devices, consistent with the Document Printing Application (DPA), ISO/IEC 10175, as reflected in the object 'scmHrDevInfoRealization'. Note: Conforming implementations SHALL NOT 'bubble up' status from 'physical' devices to associated 'logical' devices. All devices SHALL report their own status ONLY. See: Section 9 'Supplement' in SCMI Extensions to IETF Host Resources TC, for implementation guidance for this MIB module. Copyright (C) 1995-2002 Samsung Corporation. All Rights Reserved.
scmHrMIBConformance	1.3.6.1.4.1.236.11.5.11.53.2
scmHrMIBGroups	1.3.6.1.4.1.236.11.5.11.53.2.2

RFC description

Extends IETF Host Resources MIB with Samsung device support for physical and logical device status reporting.

Start monitoring Samsung network-attached printer/MFP, Host Resources MIB host system (extended CPU/memory/device status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SAMSUNG-HOST-RESOURCES-EXT-MIB

What Is SAMSUNG-HOST-RESOURCES-EXT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description