All MIBs › SAMSUNG-HOST-RESOURCES-EXT-TC
Organization: Samsung Corporation - SCMI Working Group
Last Updated: 2004-07-17
Category: Samsung Device Management, Storage and Host Resources
Description: Defines Samsung host resources extension textual conventions for resource type enumeration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SAMSUNG-HOST-RESOURCES-EXT-TC?
SAMSUNG-HOST-RESOURCES-EXT-TC is a Samsung textual-conventions (TC) module that supports the companion Samsung Host Resources Extension MIB (scmHrMIB), extending the standard IETF Host Resources MIB (RFC 2790) for Samsung network-attached devices such as printers and multi-function printers. Rather than defining pollable instance data directly, it defines the data types, enumerations, and building blocks used by the companion MIB's real objects, covering device status/condition codes, calendar/time-of-day types, and management command codes. Those types are used to report hardware/software realization and status of physical and logical device components, and to issue management commands such as device resets, aligning with ISO DPA-style device modeling. It explicitly depends on and extends RFC 2790 (Host Resources MIB) and is meant to be used together with the companion scmHrMIB module. It is typically deployed on Samsung network printers/MFPs where extended device status beyond plain Host Resources reporting is needed. Engineers can download the SAMSUNG-HOST-RESOURCES-EXT-TC file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SAMSUNG-HOST-RESOURCES-EXT-TC. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Samsung network printers/MFPs (multi-function printers)
Monitoring Examples
The companion MIB uses these TCs to report sCmHrDevInfoStatus/sCmHrDevInfoXStatus (device or component status) and sCmHrDevInfoConditions/sCmHrDevInfoXConditions (fault conditions) for a realized device component, letting an admin detect a fault-like condition on the printer; sCmHrDevMgmtCommandRequest, using enumerations in the style of scmHrAdminDeviceResetWarning, would be used to issue a remote device reset command.
What Can Be Monitored
- device/component status
- extended device status
- device fault conditions
- device management command state
- device realization type (physical/logical)
- calendar/time-of-day settings
This MIB depends on
Related MIBs
Imported Objects
From SAMSUNG-COMMON-MIB
| samsungCommonMIB | OBJECT-IDENTITY |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| scmHrAdminCommsService | 1.3.6.1.4.1.236.11.5.11.52.3.7 | The host system communications management service. | ||
| scmHrAdminDeviceCoolDown | 1.3.6.1.4.1.236.11.5.11.52.4.17 | |||
| scmHrAdminDeviceEnergySave | 1.3.6.1.4.1.236.11.5.11.52.4.18 | |||
| scmHrAdminDeviceFlushInOut | 1.3.6.1.4.1.236.11.5.11.52.4.13 | |||
| scmHrAdminDeviceFlushInput | 1.3.6.1.4.1.236.11.5.11.52.4.11 | |||
| scmHrAdminDeviceFlushOutput | 1.3.6.1.4.1.236.11.5.11.52.4.12 | |||
| scmHrAdminDeviceManage | 1.3.6.1.4.1.236.11.5.11.52.4.14 | |||
| scmHrAdminDeviceNone | 1.3.6.1.4.1.236.11.5.11.52.4.1 | |||
| scmHrAdminDeviceOperationTypes | 1.3.6.1.4.1.236.11.5.11.52.4 | The root of all host resources admin device operation types defined in the Host Resources Extensions TC. Usage: The following OIDs support access control for the simple device admin operations defined in 'ScmHrDevMgmtCommandRequest' and used in 'scmHrDevMgmtCommandRequest' in the SCMI HRX MIB, via 'scmSec[Master|Policy]VerbTypeOID' in the SCMI Security MIB, WITHOUT requiring implementation of the SCMI System Admin MIB. | ||
| scmHrAdminDevicePowerToReady | 1.3.6.1.4.1.236.11.5.11.52.4.20 | |||
| scmHrAdminDevicePowerToSleep | 1.3.6.1.4.1.236.11.5.11.52.4.22 | |||
| scmHrAdminDevicePowerToStandby | 1.3.6.1.4.1.236.11.5.11.52.4.21 | |||
| scmHrAdminDeviceQuiesce | 1.3.6.1.4.1.236.11.5.11.52.4.6 | |||
| scmHrAdminDeviceRefresh | 1.3.6.1.4.1.236.11.5.11.52.4.15 | |||
| scmHrAdminDeviceResetCold | 1.3.6.1.4.1.236.11.5.11.52.4.9 | |||
| scmHrAdminDeviceResetCounters | 1.3.6.1.4.1.236.11.5.11.52.4.7 | |||
| scmHrAdminDeviceResetFactory | 1.3.6.1.4.1.236.11.5.11.52.4.10 | |||
| scmHrAdminDeviceResetWarm | 1.3.6.1.4.1.236.11.5.11.52.4.8 | |||
| scmHrAdminDeviceResetWarning | 1.3.6.1.4.1.236.11.5.11.52.4.3 | |||
| scmHrAdminDeviceService | 1.3.6.1.4.1.236.11.5.11.52.3.3 | The host system device management service. | ||
| scmHrAdminDeviceShutdown | 1.3.6.1.4.1.236.11.5.11.52.4.5 | |||
| scmHrAdminDeviceStartup | 1.3.6.1.4.1.236.11.5.11.52.4.2 | |||
| scmHrAdminDeviceTest | 1.3.6.1.4.1.236.11.5.11.52.4.4 | |||
| scmHrAdminDeviceWakeUp | 1.3.6.1.4.1.236.11.5.11.52.4.19 | |||
| scmHrAdminDeviceWarmUp | 1.3.6.1.4.1.236.11.5.11.52.4.16 | |||
| scmHrAdminDocService | 1.3.6.1.4.1.236.11.5.11.52.3.5 | The host system document management service. | ||
| scmHrAdminJobService | 1.3.6.1.4.1.236.11.5.11.52.3.4 | The host system job management service. | ||
| scmHrAdminObjectService | 1.3.6.1.4.1.236.11.5.11.52.3.1 | The host system object management service. | ||
| scmHrAdminSecurityService | 1.3.6.1.4.1.236.11.5.11.52.3.6 | The host system security management service. | ||
| scmHrAdminServerService | 1.3.6.1.4.1.236.11.5.11.52.3.2 | The host system server management service. | ||
| scmHrAdminServiceTypes | 1.3.6.1.4.1.236.11.5.11.52.3 | The root of all host system management service types (classes) defined in the Host Resources Extensions TC. | ||
| scmHrCruAdfFeedHeadModule | 1.3.6.1.4.1.236.11.5.11.52.2.206 | CRU ADF feed head module - manufacturer independent. An 'scmHrCruAdfFeedHeadModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. Note: ADF is an acronym for 'automatic document feeder'. | ||
| scmHrCruCleanerUnitModule | 1.3.6.1.4.1.236.11.5.11.52.2.209 | CRU cleaner unit module - manufacturer independent. An 'scmHrCruCleanerUnitModule' device is a customer replaceable cleaner unit, with 'scmHrDevInfoRealization' of 'physical' (eg, a belt cleaner or a photoreceptor cleaner). | ||
| scmHrCruCollectorBottleModule | 1.3.6.1.4.1.236.11.5.11.52.2.204 | CRU (developer) collector bottle - manufacturer independent. An 'scmHrCruCollectorBottleModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruFilterModule | 1.3.6.1.4.1.236.11.5.11.52.2.208 | CRU filter module - manufacturer independent. An 'scmHrCruFilterModule' device is a customer replaceable filter or filter unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruFuserModule | 1.3.6.1.4.1.236.11.5.11.52.2.202 | CRU fuser module - manufacturer independent. An 'scmHrCruFuserModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruFuserWebModule | 1.3.6.1.4.1.236.11.5.11.52.2.207 | CRU fuser web module - manufacturer independent. An 'scmHrCruFuserWebModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. Note: A 'fuser web' is an oil-soaked fiber roll in a fuser, which prevents toner from getting on the fuser roll. The 'fuser web' device would normally be replaced several times before the actual fuser device ('scmHrCRUFuserModule') is replaced. | ||
| scmHrCruPFPFeedRollModule | 1.3.6.1.4.1.236.11.5.11.52.2.212 | CRU Paper Feed Platform module - manufacturer independent. An 'scmHrCruPaperFeedModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruPFPRetardRollModule | 1.3.6.1.4.1.236.11.5.11.52.2.213 | CRU PFP Retard Roll module - manufacturer independent. An 'scmHrCruPFPRetardRollModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruTonerBottleModule | 1.3.6.1.4.1.236.11.5.11.52.2.203 | CRU toner bottle module - manufacturer independent. An 'scmHrCruTonerBottleModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruTransferRollerModule | 1.3.6.1.4.1.236.11.5.11.52.2.211 | CRU transfer roller module - manufacturer independent. An 'scmHrCruTransferRollerModule' device is a customer replaceable transfer roller, with 'scmHrDevInfoRealization' of 'physical' (eg, a biased transfer roller). | ||
| scmHrCruTransferUnitModule | 1.3.6.1.4.1.236.11.5.11.52.2.210 | CRU transfer unit module - manufacturer independent. An 'scmHrCruTransferUnitModule' device is a customer replaceable transfer unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruTrayFeedHeadModule | 1.3.6.1.4.1.236.11.5.11.52.2.205 | CRU tray feed head module - manufacturer independent. An 'scmHrCruTrayFeedHeadModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| scmHrCruXerographicModule | 1.3.6.1.4.1.236.11.5.11.52.2.201 | CRU xerographic module - manufacturer independent. An 'scmHrCruXerographicModule' device is a customer replaceable unit, with 'scmHrDevInfoRealization' of 'physical'. | ||
| SCM sCmHrDevCalendarDayOfWeek | 1.3.6.1.4.1.236.11.5.11.52.999.1 | ScmHrDevCalendarDayOfWeek | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevCalendarTimeOfDay | 1.3.6.1.4.1.236.11.5.11.52.999.2 | ScmHrDevCalendarTimeOfDay | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevDetailType | 1.3.6.1.4.1.236.11.5.11.52.999.3 | ScmHrDevDetailType | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevDetailUnitClass | 1.3.6.1.4.1.236.11.5.11.52.999.4 | ScmHrDevDetailUnitClass | not-accessible | Dummy - DO NOT USE |
| scmHrDeviceCopier | 1.3.6.1.4.1.236.11.5.11.52.2.103 | Copier device type - manufacturer independent. An 'scmHrDeviceCopier' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' I/O device (eg, a 'copier' on a multifunction printer). An 'scmHrDeviceCopier' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' I/O device (eg, a 'personality' of a 'copier' on a multifunction printer). | ||
| scmHrDeviceCopierHistory | 1.3.6.1.4.1.236.11.5.11.52.2.153 | Copier history device type - manufacturer independent. | ||
| scmHrDeviceFax | 1.3.6.1.4.1.236.11.5.11.52.2.104 | Fax device type - manufacturer independent. An 'scmHrDeviceFax' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' I/O device (eg, a 'fax channel' on a multifunction printer). An 'scmHrDeviceFax' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' I/O device (eg, a 'personality' of a 'fax channel' on a multifunction printer). | ||
| scmHrDeviceFaxHistory | 1.3.6.1.4.1.236.11.5.11.52.2.154 | Fax history device type - manufacturer independent. | ||
| scmHrDeviceFeeder | 1.3.6.1.4.1.236.11.5.11.52.2.107 | Feeder device type - manufacturer independent. An 'scmHrDeviceFeeder' device is an input device. An 'scmHrDeviceFeeder' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'high-capacity feeder' on a high-end printer). An 'scmHrDeviceFeeder' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'high-capacity feeder' on a high-end printer). | ||
| scmHrDeviceFinisher | 1.3.6.1.4.1.236.11.5.11.52.2.106 | Finisher device type - manufacturer independent. An 'scmHrDeviceFinisher' device is an output finishing device. An 'scmHrDeviceFinisher' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'stapler' on a high-end printer). An 'scmHrDeviceFinisher' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'stapler' on a high-end printer). | ||
| scmHrDeviceFinisher3rdParty | 1.3.6.1.4.1.236.11.5.11.52.2.115 | 3rd Party Finisher device type - manufacturer independent. An 'scmHrDeviceFinisher3rdParty' device is an output finishing device. An 'scmHrDeviceFinisher3rdParty' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'stapler' on a high-end printer). An 'scmHrDeviceFinisher3rdParty' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'stapler' on a high-end printer). | ||
| scmHrDeviceFinisherBFM | 1.3.6.1.4.1.236.11.5.11.52.2.112 | Basic Finisher Module device type - manufacturer independent. An 'scmHrDeviceFinisherBFM' device is a basic output finishing device. An 'scmHrDeviceFinisherBFM' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'stapler' on a high-end printer). An 'scmHrDeviceFinisherBFM' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'stapler' on a high-end printer). | ||
| scmHrDeviceFinisherMFF | 1.3.6.1.4.1.236.11.5.11.52.2.113 | Multi-Function Finisher device type - manufacturer independent. An 'scmHrDeviceFinisherMFF' device is a multi-function output finishing device. An 'scmHrDeviceFinisherMFF' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'saddle stitcher', 'C-Folder', 'Z-Folder', 'Hole Puncher' on a high-end printer). An 'scmHrDeviceFinisherMFF' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'saddle stitcher', 'C-Folder', 'Z-Folder', 'Hole Puncher' on a high-end printer). | ||
| scmHrDeviceFinisherXIM | 1.3.6.1.4.1.236.11.5.11.52.2.114 | eXternal Interface Module Finisher device type. An 'scmHrDeviceFinisherXIM' device is a hardware interface used to pass media from a Samsung printing device to a 3rd party finishing devices. The 'scmHrDeviceFinihserXIM' may or may not contain its own output trays or finishing capabilities. An 'scmHrDeviceFinisherXIM' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (e.g., an 'output bridge' on a high-end printer). | ||
| scmHrDeviceFlashDIMMBootLoader | 1.3.6.1.4.1.236.11.5.11.52.2.261 | The device type identifier used for a Flash DIMM that contains the boot loader for a device. Files may or may not be stored on this device. As opposed to a Flash DIMM that contains a file store system. | ||
| scmHrDeviceFlashDIMMFileStore | 1.3.6.1.4.1.236.11.5.11.52.2.260 | The device type identifier used for a Flash DIMM that contains a file system that is used to store files such as font opposed to a Flash DIMM that contains a boot loader. | ||
| scmHrDeviceHostSystem | 1.3.6.1.4.1.236.11.5.11.52.2.101 | Host system device type - manufacturer independent. For host systems which instrument multiple devices and support MIBs with tables INDEXed by 'hrDeviceIndex', the single 'scmHrDeviceHostSystem' device represents the 'root' device which MAY be used to manage overall host system defaults, configuration, status, etc. | ||
| scmHrDeviceHostSystemHistory | 1.3.6.1.4.1.236.11.5.11.52.2.151 | Host system history device type - manufacturer independent. | ||
| scmHrDeviceInterposer | 1.3.6.1.4.1.236.11.5.11.52.2.117 | Interposer device type - manufacturer independent. An 'scmHrDeviceInterposer' device is an input device which physically resides downstream of the print engine amongst finishing modules. An 'scmHrDeviceInterposer' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' input device (eg, a 'high-capacity Interposing feeder' that physically resides amongst finishing modules on a high-end printer). An 'scmHrDeviceInterposer' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' input device (eg, a 'personality' of a 'high-capacity Interposing feeder' that physically resides amongst finishing modules on a high-end printer). Interposers are essentially feeders that are placed downstream of the print engine paper path and upstream of finishing devices. Interposer fed media is not marked by the print engine; instead media fed from an interposer is inserted before, between or after marked pages. The media constitutes covers, separators etc. | ||
| scmHrDeviceMailbox | 1.3.6.1.4.1.236.11.5.11.52.2.105 | Mailbox device type - manufacturer independent. An 'scmHrDeviceMailbox' device is a 'multi-bin' output device, with each 'bin' assigned to a user, group, account, etc, and (optionally) physical security associated with each 'bin'. An 'scmHrDeviceMailbox' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a 'tower mailbox' on a high-end printer). An 'scmHrDeviceMailbox' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a 'tower mailbox' on a high-end printer). An 'scmHrDeviceMailbox' device with 'scmHrDevInfoRealization' of 'logical' MAY also indicate the current configuration of a 'physical' device of type 'scmHrDeviceMailboxSorter'. | ||
| scmHrDeviceMailboxSorter | 1.3.6.1.4.1.236.11.5.11.52.2.109 | MailboxSorter device type - manufacturer independent. An 'scmHrDeviceMailboxSorter' is a 'multi-bin' output device, which MAY be configured as either a 'mailbox' or a 'sorter', by a system adminstrator or by default product configuration. An 'scmHrDeviceMailboxSorter' with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device and associated with associated with exactly two 'logical' output devices of types 'scmHrDeviceMailbox' and 'scmHrDeviceSorter' - one of these 'logical' devices MAY be 'running' (currently configured) - at least one SHALL be 'down' (NOT currently configured). | ||
| scmHrDeviceMarker | 1.3.6.1.4.1.236.11.5.11.52.2.111 | Marker Engine device type - manufacturer independent. An 'scmHrDeviceMarker' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, the 'marking engine' on a multifunction printer or copier). The marking engine is the module that accepts a print ready image and physical media as input and outputs physical media with a physical representation of the print ready input image. The 'scmHrDeviceMarker' is a single module within a group of modules that cumulatively are represented by 'hrDevicePrinter'. The marker shall represent the whole marker as a single physical unit and should maintain a single entry in the 'hrDeviceTable' for all products that support a single marking engine regardless of internal engine mark points. (e.g. B&W, Highlight Color and Full Color Presses shall have a single entry in 'hrDeviceTable'). Multiple entries of 'scmHrDeviceMarker' may exist in the 'hrDeviceTable' if the system supports multiple print engines whether chained, in parallel or in any other configuration. An 'scmHrDeviceMarker' SHALL NOT use 'hrDeviceIndex' of '1' (first row). The index 1 is reserved for an 'hrDevicePrinter' row. | ||
| scmHrDevicePaymentInterface | 1.3.6.1.4.1.236.11.5.11.52.2.116 | Payment Interface device type - manufacturer independent. An 'scmHrDevicePaymentInterface' device is an payment authorization device. An 'scmHrDevicePaymentInterface' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' point of purchase validation device (eg, a 'coin operated', 'smart card' or other form of point of purchase payment for services rendered on a multi-function printer or copier). An 'scmHrDevicePaymentInterface' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' point of purchase validation device (eg, a software service that accepts payment through the Web or some other form of remote point of purchase payment for services rendered on a multi-function printer or copier). | ||
| scmHrDevicePrintAppliance | 1.3.6.1.4.1.236.11.5.11.52.2.110 | Print appliance device type - manufacturer independent. An 'scmHrDevicePrintAppliance' is a network printing appliance with 'scmHrDevInfoRealization' of 'physical'. An 'scmHrDevicePrintAppliance' SHALL statically and/or actively discover available network printers and SHOULD advertise them as supported output devices, using rows in 'hrDeviceTable' of IETF HR MIB (RFC 2790) and 'prtGeneralTable' of the Printer MIB (RFC 1759 or successor), with 'hrDeviceType' set to 'hrDevicePrinter'. An 'scmHrDevicePrintAppliance' SHALL NOT use 'hrDeviceIndex' of '1' (first row) for an 'hrDevicePrinter' row, because a network printing appliance is an enhanced spooler and NOT a printer. | ||
| scmHrDevicePrinterHistory | 1.3.6.1.4.1.236.11.5.11.52.2.55 | Printer history device type - manufacturer independent. | ||
| scmHrDeviceScanner | 1.3.6.1.4.1.236.11.5.11.52.2.102 | Scanner device type - manufacturer independent. An 'scmHrDeviceScanner' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' input device (eg, a 'scan channel' on a multifunction printer). An 'scmHrDeviceScanner' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' input device (eg, a 'personality' of a 'scan channel' on a multifunction printer). | ||
| scmHrDeviceScannerHistory | 1.3.6.1.4.1.236.11.5.11.52.2.152 | Scanner history device type - manufacturer independent. | ||
| scmHrDeviceSorter | 1.3.6.1.4.1.236.11.5.11.52.2.108 | Sorter device type - manufacturer independent. An 'scmHrDeviceSorter' device is a 'multi-bin' output device, with each 'bin' assigned to a copy of the current job, and NO physical security associated with each 'bin'. An 'scmHrDeviceSorter' device with 'scmHrDevInfoRealization' of 'physical' is a 'real' output device (eg, a '10-bin sorter' on a mid-range printer). An 'scmHrDeviceSorter' device with 'scmHrDevInfoRealization' of 'logical' is a 'virtual' output device (eg, a 'personality' of a '10-bin sorter' on a mid-range printer). An 'scmHrDeviceSorter' device with 'scmHrDevInfoRealization' of 'logical' MAY also indicate the current configuration of a 'physical' device of type 'scmHrDeviceMailboxSorter'. | ||
| scmHrDeviceTypes | 1.3.6.1.4.1.236.11.5.11.52.2 | The root of all additional device types defined in HRX TC. | ||
| scmHrDeviceUSBPort | 1.3.6.1.4.1.236.11.5.11.52.2.250 | The device type identifier used for a Universal Serial Bus port. | ||
| SCM sCmHrDevInfoConditions | 1.3.6.1.4.1.236.11.5.11.52.999.8 | ScmHrDevInfoConditions | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevInfoRealization | 1.3.6.1.4.1.236.11.5.11.52.999.5 | ScmHrDevInfoRealization | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevInfoStatus | 1.3.6.1.4.1.236.11.5.11.52.999.6 | ScmHrDevInfoStatus | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevInfoXConditions | 1.3.6.1.4.1.236.11.5.11.52.999.9 | ScmHrDevInfoXConditions | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevInfoXStatus | 1.3.6.1.4.1.236.11.5.11.52.999.7 | ScmHrDevInfoXStatus | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevMgmtCommandData | 1.3.6.1.4.1.236.11.5.11.52.999.11 | ScmHrDevMgmtCommandData | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevMgmtCommandDataTag | 1.3.6.1.4.1.236.11.5.11.52.999.12 | ScmHrDevMgmtCommandDataTag | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevMgmtCommandRequest | 1.3.6.1.4.1.236.11.5.11.52.999.10 | ScmHrDevMgmtCommandRequest | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevPowerModeType | 1.3.6.1.4.1.236.11.5.11.52.999.13 | ScmHrDevPowerModeType | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevPowerTimeUnit | 1.3.6.1.4.1.236.11.5.11.52.999.14 | ScmHrDevPowerTimeUnit | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDevTrafficUnit | 1.3.6.1.4.1.236.11.5.11.52.999.15 | ScmHrDevTrafficUnit | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDpaAvailability | 1.3.6.1.4.1.236.11.5.11.52.999.20 | ScmHrDpaAvailability | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDpaConditions | 1.3.6.1.4.1.236.11.5.11.52.999.21 | ScmHrDpaConditions | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDpaJobValidateSupport | 1.3.6.1.4.1.236.11.5.11.52.999.22 | ScmHrDpaJobValidateSupport | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDpaObjectClassSupport | 1.3.6.1.4.1.236.11.5.11.52.999.23 | ScmHrDpaObjectClassSupport | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrDpaState | 1.3.6.1.4.1.236.11.5.11.52.999.24 | ScmHrDpaState | not-accessible | Dummy - DO NOT USE |
| sCmHrDummy | 1.3.6.1.4.1.236.11.5.11.52.999 | |||
| SCM sCmHrGroupSupport | 1.3.6.1.4.1.236.11.5.11.52.999.16 | ScmHrGroupSupport | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrStorageDetailType | 1.3.6.1.4.1.236.11.5.11.52.999.18 | ScmHrStorageDetailType | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrStorageRealization | 1.3.6.1.4.1.236.11.5.11.52.999.19 | ScmHrStorageRealization | not-accessible | Dummy - DO NOT USE |
| SCM sCmHrSWRunXStatus | 1.3.6.1.4.1.236.11.5.11.52.999.17 | ScmHrSWRunXStatus | not-accessible | Dummy - DO NOT USE |
| scmHrTC | 1.3.6.1.4.1.236.11.5.11.52 | Version: 1.00 The TC module for textual conventions, enumerated types, OIDs, and other volatile elements of the companion Host Resources Extensions MIB ('scmHrMIB'), which supports extended configuration and management of various host resources for network accessible host systems. These modules augment and extend the original IETF Host Resources MIB (RFC 2790). Usage: This MIB module introduces support for the 'realization' of both 'physical' and 'logical' devices, consistent with ISO DPA (Document Printing Application), ISO/IEC 10175, as reflected in the object 'scmHrDevInfoRealization'. Note: Conforming implementations SHALL NOT 'bubble up' status from 'physical' devices to associated 'logical' devices. All devices SHALL report their own status ONLY. See: Section 9 'Supplement' in SCMI Extensions to IETF Host Resources TC, for implementation guidance for this TC module. Copyright (C) 1995-2003 Samsung Corporation. All Rights Reserved. |
RFC description
Defines textual conventions for Samsung host device types, CRU types, and resource management.
Start monitoring Samsung network printers/MFPs (Host Resources extension textual conventions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.