ROUTING6-MIB

All MIBs › ROUTING6-MIB

Organization: Quanta Computer Inc.

Last Updated: 2011-01-26

Category: Routing

Description: Manages IPv6 routing configuration, route tables, and forwarding entries on Quanta Computer switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ROUTING6-MIB?

ROUTING6-MIB is a Quanta Computer private MIB (routingIpv6, registered under the switch enterprise branch of Quanta's FastPath-based switch software) that manages IPv6 unicast routing configuration on Quanta switches. It exposes a global routing enable/disable switch (agentIpv6RoutingMode) and a per-interface configuration table, agentIpv6InterfaceTable, covering MTU (agentIpv6InterfaceMtuValue), duplicate-address-detection transmit count (agentIpv6InterfaceDadTransmits), link-local-only operation, ICMPv6 unreachable message generation, and SLAAC/DHCPv6-client behavior (agentIpv6InterfaceAutoconfig, agentIpv6InterfaceDhcpClient). It imports OSPFv3-MIB and OSPF-MIB types (ospfv3IfEntry, ospfv3VirtIfEntry, ospfv3AreaEntry, RouterID, AreaID), indicating the module extends into IPv6 OSPFv3 area/interface configuration alongside basic interface settings. This lets an operator confirm IPv6 routing and address-autoconfiguration behavior per interface and diagnose why an interface isn't forming IPv6 neighbor adjacencies or accepting configuration. It depends on the IPV6-TC, OSPFV3-MIB, OSPF-MIB, and QUANTA-SWITCH-MIB modules, and is deployed on Quanta whitebox switches running IPv6 unicast/OSPFv3 routing; network engineers can consult the ROUTING6-MIB MIB when instrumenting IPv6 routing visibility on these switches.

IPNetwork Monitor allows you to monitor SNMP objects defined in ROUTING6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Quanta Computer FastPath-based switches (whitebox/ODM switch platforms)

Monitoring Examples

An operator checks agentIpv6RoutingMode is enabled and then reads agentIpv6InterfaceMtuValue and agentIpv6InterfaceLinkLocalOnly for an uplink interface failing to pass IPv6 traffic; an interface configured link-local-only when a global IPv6 address was expected would explain why it isn't participating in OSPFv3 routing.

What Can Be Monitored

global IPv6 routing enable/disable state
per-interface MTU and DAD transmit count
link-local-only and ICMPv6 unreachable settings
SLAAC/DHCPv6 client configuration per interface
OSPFv3 interface/area association (via imported types)

Imported Objects

From IPV6-TC

Ipv6Address
Ipv6AddressIfIdentifier
Ipv6AddressPrefix
Ipv6IfIndex
Ipv6IfIndexOrZero

From OSPF-MIB

AreaID
RouterID

From OSPFV3-MIB

ospfv3AreaEntry	OBJECT-TYPE
ospfv3IfEntry	OBJECT-TYPE
ospfv3VirtIfEntry	OBJECT-TYPE

From QUANTA-SWITCH-MIB

switch

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
mib-2

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowPointer
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
routingIpv6	1.3.6.1.4.1.7244.2.30			The Quanta Private MIB for FastPath Ipv6 Routing
agentIpv6Group	1.3.6.1.4.1.7244.2.30.1
INT agentIpv6RoutingMode	1.3.6.1.4.1.7244.2.30.1.1	INTEGER	read-write	Administratively enables/disables ipv6 unicast routing on the switch.
agentIpv6InterfaceTable	1.3.6.1.4.1.7244.2.30.1.2		not-accessible
agentIpv6InterfaceEntry	1.3.6.1.4.1.7244.2.30.1.2.1		not-accessible
I32 agentIpv6InterfaceIfIndex	1.3.6.1.4.1.7244.2.30.1.2.1.1	Integer32	read-only	The IfIndex associated with this instance.
U32 agentIpv6InterfaceMtuValue	1.3.6.1.4.1.7244.2.30.1.2.1.2	Unsigned32	read-write	Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU.
I32 agentIpv6InterfaceDadTransmits	1.3.6.1.4.1.7244.2.30.1.2.1.3	Integer32	read-write	Configures the dad transmits value for this interface.
INT agentIpv6InterfaceLinkLocalOnly	1.3.6.1.4.1.7244.2.30.1.2.1.4	INTEGER	read-write	When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used.
INT agentIpv6InterfaceIcmpUnreachables	1.3.6.1.4.1.7244.2.30.1.2.1.5	INTEGER	read-write	If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface.
INT agentIpv6InterfaceAutoconfig	1.3.6.1.4.1.7244.2.30.1.2.1.6	INTEGER	read-write	If this object is enabled, it indicates that the IPv6 address is automatically generated using IPv6 stateless address auto configuration.
INT agentIpv6InterfaceDhcpClient	1.3.6.1.4.1.7244.2.30.1.2.1.7	INTEGER	read-write	If this object is enabled, the interface uses DHCPv6 Client protocol to acquire an IPv6 address.
agentIpv6RouterAdvertisementTable	1.3.6.1.4.1.7244.2.30.1.3		not-accessible	There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well.
agentIpv6RouterAdvertisementEntry	1.3.6.1.4.1.7244.2.30.1.3.1		not-accessible
I32 agentIpv6RouterAdvertisementIfIndex	1.3.6.1.4.1.7244.2.30.1.3.1.1	Integer32	read-only	Interface Number to configure Router Advertisement on.
INT agentIpv6RouterAdvertisementSuppressMode	1.3.6.1.4.1.7244.2.30.1.3.1.2	INTEGER	read-write	Enable or disable router advertisement suppression on the interface.
I32 agentIpv6RouterAdvertisementMaxAdvertisementInterval	1.3.6.1.4.1.7244.2.30.1.3.1.3	Integer32	read-write	Maximum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)
I32 agentIpv6RouterAdvertisementMinAdvertisementInterval	1.3.6.1.4.1.7244.2.30.1.3.1.4	Integer32	read-write	Mimimum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)
I32 agentIpv6RouterAdvertisementAdvertisementLifetime	1.3.6.1.4.1.7244.2.30.1.3.1.5	Integer32	read-write	Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval.
U32 agentIpv6RouterAdvertisementNbrSolicitInterval	1.3.6.1.4.1.7244.2.30.1.3.1.6	Unsigned32	read-write	Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. The valid value range is 1000..4294967295
I32 agentIpv6RouterAdvertisementReachableTime	1.3.6.1.4.1.7244.2.30.1.3.1.7	Integer32	read-write	Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.
INT agentIpv6RouterAdvertisementManagedFlag	1.3.6.1.4.1.7244.2.30.1.3.1.8	INTEGER	read-write	Value of managed config field of router advertisement sent from the interface.
INT agentIpv6RouterAdvertisementOtherFlag	1.3.6.1.4.1.7244.2.30.1.3.1.9	INTEGER	read-write	Value of other config field of router advertisement sent from the interface.
agentIpv6AddrPrefixTable	1.3.6.1.4.1.7244.2.30.1.4		not-accessible	The list of IPv6 address prefixes of IPv6 interfaces.
agentIpv6AddrPrefixEntry	1.3.6.1.4.1.7244.2.30.1.4.1		not-accessible	An interface entry containing objects of a particular IPv6 address prefix.
ADR agentIpv6AddrPrefix	1.3.6.1.4.1.7244.2.30.1.4.1.1	Ipv6AddressPrefix	not-accessible	The prefix associated with the this interface.
INT agentIpv6AddrPrefixLength	1.3.6.1.4.1.7244.2.30.1.4.1.2	INTEGER	not-accessible	The length of the prefix (in bits).
T/F agentIpv6AddrPrefixOnLinkFlag	1.3.6.1.4.1.7244.2.30.1.4.1.3	TruthValue	read-write	This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
T/F agentIpv6AddrPrefixAutonomousFlag	1.3.6.1.4.1.7244.2.30.1.4.1.4	TruthValue	read-write	Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
U32 agentIpv6AddrPrefixAdvPreferredLifetime	1.3.6.1.4.1.7244.2.30.1.4.1.5	Unsigned32	read-write	It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
U32 agentIpv6AddrPrefixAdvValidLifetime	1.3.6.1.4.1.7244.2.30.1.4.1.6	Unsigned32	read-write	It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
agentIpv6AddrTable	1.3.6.1.4.1.7244.2.30.1.5		not-accessible	The table of addressing information relevant to this node's interface addresses.
agentIpv6AddrEntry	1.3.6.1.4.1.7244.2.30.1.5.1		not-accessible	The addressing information for one of this node's interface addresses.
ADR agentIpv6AddrAddress	1.3.6.1.4.1.7244.2.30.1.5.1.1	Ipv6Address	not-accessible	The IPv6 address to which this entry's addressing information pertains.
INT agentIpv6AddrPfxLength	1.3.6.1.4.1.7244.2.30.1.5.1.2	INTEGER	read-create	The length of the prefix (in bits) associated with the IPv6 address of this entry.
T/F agentIpv6AddrEui64Flag	1.3.6.1.4.1.7244.2.30.1.5.1.3	TruthValue	read-create	This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.
ROW agentIpv6AddrStatus	1.3.6.1.4.1.7244.2.30.1.5.1.4	RowStatus	read-create	Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
agentIpv6StaticRouteTable	1.3.6.1.4.1.7244.2.30.1.6		not-accessible	IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination.
agentIpv6StaticRouteEntry	1.3.6.1.4.1.7244.2.30.1.6.1		not-accessible	A routing entry.
ADR agentIpv6StaticRouteDest	1.3.6.1.4.1.7244.2.30.1.6.1.1	Ipv6AddressPrefix	not-accessible	The destination IPv6 address of this route. This object may not take a Multicast address value.
INT agentIpv6StaticRoutePfxLength	1.3.6.1.4.1.7244.2.30.1.6.1.2	INTEGER	not-accessible	Indicates the prefix length of the destination address.
IPV agentIpv6StaticRouteIfIndex	1.3.6.1.4.1.7244.2.30.1.6.1.3	Ipv6IfIndexOrZero	not-accessible	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero.
ADR agentIpv6StaticRouteNextHop	1.3.6.1.4.1.7244.2.30.1.6.1.4	Ipv6Address	not-accessible	The address of the next system en route.
INT agentIpv6StaticRoutePreference	1.3.6.1.4.1.7244.2.30.1.6.1.5	INTEGER	read-create	The routing preference metric for this route. A lower value is more preferred.
ROW agentIpv6StaticRouteStatus	1.3.6.1.4.1.7244.2.30.1.6.1.6	RowStatus	read-create	Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface.
agentIpv6ServicePortGroup	1.3.6.1.4.1.7244.2.30.1.7
agentIpv6ServicePortPrefixTable	1.3.6.1.4.1.7244.2.30.1.7.1		not-accessible	IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port.
agentIpv6ServicePortPrefixEntry	1.3.6.1.4.1.7244.2.30.1.7.1.1		not-accessible	An IPv6 Service Port Prefix entry.
U32 agentIpv6ServicePortPrefixIndex	1.3.6.1.4.1.7244.2.30.1.7.1.1.1	Unsigned32	not-accessible	The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
ADR agentIpv6ServicePortPrefix	1.3.6.1.4.1.7244.2.30.1.7.1.1.2	Ipv6Address	read-only	The Ipv6 Prefix Address configured on the Service Port.
U32 agentIpv6ServicePortPrefixLength	1.3.6.1.4.1.7244.2.30.1.7.1.1.3	Unsigned32	read-only	The length of the IPv6 Prefix Address.
agentIpv6ServicePortDefaultRouterTable	1.3.6.1.4.1.7244.2.30.1.7.2		not-accessible	IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port.
agentIpv6ServicePortDefaultRouterEntry	1.3.6.1.4.1.7244.2.30.1.7.2.1		not-accessible	An IPv6 Service Port Default Router entry.
U32 agentIpv6ServicePortDefaultRouterIndex	1.3.6.1.4.1.7244.2.30.1.7.2.1.1	Unsigned32	not-accessible	The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
ADR agentIpv6ServicePortDefaultRouter	1.3.6.1.4.1.7244.2.30.1.7.2.1.2	Ipv6Address	read-only	The Address of the IPv6 Default Router configured on the Service Port.
agentIpv6ServicePortNbrTable	1.3.6.1.4.1.7244.2.30.1.7.3		not-accessible	IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port.
agentIpv6ServicePortNbrEntry	1.3.6.1.4.1.7244.2.30.1.7.3.1		not-accessible	An IPv6 Service Port Neighbor entry.
ADR agentIpv6ServicePortNbrAddr	1.3.6.1.4.1.7244.2.30.1.7.3.1.1	Ipv6Address	not-accessible	The Ipv6 Address of a neighbor switch visible to the Service Port.
MAC agentIpv6ServicePortNbrPhysAddr	1.3.6.1.4.1.7244.2.30.1.7.3.1.2	MacAddress	read-only	The MacAddress of the neighboring switch.
INT agentIpv6ServicePortNbrState	1.3.6.1.4.1.7244.2.30.1.7.3.1.3	INTEGER	read-only	The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status.
TIM agentIpv6ServicePortNbrUpdated	1.3.6.1.4.1.7244.2.30.1.7.3.1.4	TimeStamp	read-only	The last sysUpTime that this neighbor has been updated.
T/F agentIpv6ServicePortNbrIsRouter	1.3.6.1.4.1.7244.2.30.1.7.3.1.5	TruthValue	read-only	Returns true(1) if the neighbor machine is a router, false(2) otherwise.
INT agentIpv6ServicePortConfigProtocol	1.3.6.1.4.1.7244.2.30.1.7.4	INTEGER	read-write	The switch's ServicePort IPv6 config protocol
T/F agentIpv6ServicePortDhcpRestart	1.3.6.1.4.1.7244.2.30.1.7.5	TruthValue	read-write	The switch's ServicePort IPv6 DHCP Restart
agentIpv6NeighborGroup	1.3.6.1.4.1.7244.2.30.1.9
agentIpv6NeighborTable	1.3.6.1.4.1.7244.2.30.1.9.1		not-accessible	IPv6 Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured
agentIpv6NeighborEntry	1.3.6.1.4.1.7244.2.30.1.9.1.1		not-accessible	An IPv6 Neighbor entry.
IPV agentIpv6NeighborIfIndex	1.3.6.1.4.1.7244.2.30.1.9.1.1.1	Ipv6IfIndex	read-only	A unique non-zero value identifying the particular IPv6 interface.
ADR agentIpv6NeighborAddress	1.3.6.1.4.1.7244.2.30.1.9.1.1.2	Ipv6Address	read-only	The Ipv6 Address of a neighbor switch visible
PHY agentIpv6NeighborMacAddress	1.3.6.1.4.1.7244.2.30.1.9.1.1.3	PhysAddress	read-only	The MacAddress of the neighboring switch.
T/F agentIpv6NeighborIsRouter	1.3.6.1.4.1.7244.2.30.1.9.1.1.4	TruthValue	read-only	Returns true(1) if the neighbor machine is a router, false(2) otherwise.
INT agentIpv6NeighborState	1.3.6.1.4.1.7244.2.30.1.9.1.1.5	INTEGER	read-only	The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status.
TIM agentIpv6NeighborLastUpdated	1.3.6.1.4.1.7244.2.30.1.9.1.1.6	TimeStamp	read-only	The last sysUpTime that this neighbor has been updated.
agentIpv6StaticNeighbor	1.3.6.1.4.1.7244.2.30.1.9.2		not-accessible	IPv6 static Neighbor Table. This table contains an entry for each valid IPv6 static Neighbor configured
agentIpv6StaticNeighborEntry	1.3.6.1.4.1.7244.2.30.1.9.2.1		not-accessible	An IPv6 static Neighbor entry.
IPV agentIpv6StaticNeighborIfIndex	1.3.6.1.4.1.7244.2.30.1.9.2.1.1	Ipv6IfIndex	not-accessible	A unique non-zero value identifying the particular IPv6 interface.
ADR agentIpv6StaticNeighborAddress	1.3.6.1.4.1.7244.2.30.1.9.2.1.2	Ipv6Address	read-only	The Ipv6 Address of a static neighbor switch visible
PHY agentIpv6StaticNeighborMacAddress	1.3.6.1.4.1.7244.2.30.1.9.2.1.3	PhysAddress	read-only	The MacAddress of the static neighboring switch.
OCT agentIpv6StaticNeighborRowAddress	1.3.6.1.4.1.7244.2.30.1.9.3	OCTET STRING	read-write	The Ipv6 Address of a static neighbor switch visible
PHY agentIpv6StaticNeighborRowMacAddress	1.3.6.1.4.1.7244.2.30.1.9.4	PhysAddress	read-write	The MacAddress of the static neighboring switch.
ROW agentIpv6StaticNeighborRowStatus	1.3.6.1.4.1.7244.2.30.1.9.5	RowStatus	read-write	Creates a new entry in the Neighbor table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated address from the interface.
agentIpv6IcmpControlGroup	1.3.6.1.4.1.7244.2.30.1.10
I32 agentIpv6IcmpRateLimitInterval	1.3.6.1.4.1.7244.2.30.1.10.1	Integer32	read-write	Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
I32 agentIpv6IcmpRateLimitBurstSize	1.3.6.1.4.1.7244.2.30.1.10.2	Integer32	read-write	Specifies the number of tokens to be placed after timeout.
agentDhcp6ClientParametersTable	1.3.6.1.4.1.7244.2.30.1.11		not-accessible	Information about the DHCPv6 Client parameters on the interfaces.
agentDhcp6ClientParametersEntry	1.3.6.1.4.1.7244.2.30.1.11.1		not-accessible	DHCPv6 Client information on an interface.
U32 agentDhcp6ClientInterfaceIndex	1.3.6.1.4.1.7244.2.30.1.11.1.1	Unsigned32	read-only	The Interface index on which the IPv6 address is leased by the DHCPv6 Server.
ADR agentDhcp6ClientPrefix	1.3.6.1.4.1.7244.2.30.1.11.1.2	Ipv6AddressPrefix	read-only	The IPv6 Prefix leased by the DHCPv6 Server.
INT agentDhcp6ClientPrefixlength	1.3.6.1.4.1.7244.2.30.1.11.1.3	INTEGER	read-only	The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server.
INT agentDhcp6ClientState	1.3.6.1.4.1.7244.2.30.1.11.1.4	INTEGER	read-only	The State of the DHCPv6 Client on this interface.
STR agentDhcp6ClientServerDUID	1.3.6.1.4.1.7244.2.30.1.11.1.5	DisplayString	read-only	The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface.
U32 agentDhcp6ClientT1Time	1.3.6.1.4.1.7244.2.30.1.11.1.6	Unsigned32	read-only	The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal.
U32 agentDhcp6ClientT2Time	1.3.6.1.4.1.7244.2.30.1.11.1.7	Unsigned32	read-only	The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages.
U32 agentDhcp6ClientIAID	1.3.6.1.4.1.7244.2.30.1.11.1.8	Unsigned32	read-only	An identifier for an identity association chosen by this Client.
U32 agentDhcp6ClientPreferredLifeTime	1.3.6.1.4.1.7244.2.30.1.11.1.9	Unsigned32	read-only	The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
U32 agentDhcp6ClientValidLifeTime	1.3.6.1.4.1.7244.2.30.1.11.1.10	Unsigned32	read-only	The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
U32 agentDhcp6ClientRenewTime	1.3.6.1.4.1.7244.2.30.1.11.1.11	Unsigned32	read-only	The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address.
U32 agentDhcp6ClientExpireTime	1.3.6.1.4.1.7244.2.30.1.11.1.12	Unsigned32	read-only	The time (in seconds) when the DHCPv6 leased address expires.
agentRouterRipngConfigGroup	1.3.6.1.4.1.7244.2.30.2
INT agentRouterRipngAdminState	1.3.6.1.4.1.7244.2.30.2.1	INTEGER	read-write	Sets the administrative mode of RIPng in the router.
INT agentRouterRipngSplitHorizonMode	1.3.6.1.4.1.7244.2.30.2.2	INTEGER	read-write	Sets the RIPng split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
I32 agentRouterRipngDefaultMetric	1.3.6.1.4.1.7244.2.30.2.5	Integer32	read-write	Default metric of redistributed routes, when RIPng redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15).
T/F agentRouterRipngDefaultMetricConfigured	1.3.6.1.4.1.7244.2.30.2.6	TruthValue	read-write	Flag to determine whether RIPng default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed.
T/F agentRouterRipngDefaultInfoOriginate	1.3.6.1.4.1.7244.2.30.2.7	TruthValue	read-write	Flag to determine, whether RIPng can advertise a default-route learned from another protocol.
I32 agentRouterRipngDistance	1.3.6.1.4.1.7244.2.30.2.8	Integer32	read-write	Configure the distance value for RIPng routes.
agentRipngRouteRedistTable	1.3.6.1.4.1.7244.2.30.2.9		not-accessible	This table contains the MIB objects required to configure route-redistribution for RIPng. Here, RIPng is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
agentRipngRouteRedistEntry	1.3.6.1.4.1.7244.2.30.2.9.1		not-accessible
INT agentRipngRouteRedistSource	1.3.6.1.4.1.7244.2.30.2.9.1.1	INTEGER	read-only	Source route, from which RIPng can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.
INT agentRipngRouteRedistMode	1.3.6.1.4.1.7244.2.30.2.9.1.2	INTEGER	read-write	User enabels/disables route-redistribution for a particular source protocol.
I32 agentRipngRouteRedistMetric	1.3.6.1.4.1.7244.2.30.2.9.1.3	Integer32	read-write	Metric used for redistributing a particular source protocol route into RIPng. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15).
T/F agentRipngRouteRedistMetricConfigured	1.3.6.1.4.1.7244.2.30.2.9.1.4	TruthValue	read-write	Flag to determine whether RIPng redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed.
I32 agentRouterRipngUpdateTime	1.3.6.1.4.1.7244.2.30.2.10	Integer32	read-write	Configure the Ripng update time.
I32 agentRouterRipngGarbageTime	1.3.6.1.4.1.7244.2.30.2.11	Integer32	read-write	Configure the Ripng garbage time.
I32 agentRouterRipngTimeoutTime	1.3.6.1.4.1.7244.2.30.2.12	Integer32	read-write	Configure the Ripng timeout time.
agentRipngIfTable	1.3.6.1.4.1.7244.2.30.2.13		not-accessible	The Ripng Interface Table describes the inter- faces from the viewpoint of Ripng.
agentRipngIfEntry	1.3.6.1.4.1.7244.2.30.2.13.1		not-accessible	The Ripng Interface Entry describes one inter- face from the viewpoint of Ripng.
I32 agentRipngIfIndex	1.3.6.1.4.1.7244.2.30.2.13.1.1	Integer32	read-only	The IfIndex associated with this instance.
INT agentRipngIfAdminMode	1.3.6.1.4.1.7244.2.30.2.13.1.2	INTEGER	read-write	Configures interface mode of Ripng.
INT agentRipngIfPassiveMode	1.3.6.1.4.1.7244.2.30.2.13.1.3	INTEGER	read-write	Flag to determine whether the interface is passive. A passive interface will not participate in the Ripng adjacency formation.
agentRouterOspfv3ConfigGroup	1.3.6.1.4.1.7244.2.30.3
I32 agentOspfv3DefaultMetric	1.3.6.1.4.1.7244.2.30.3.1	Integer32	read-write	Default metric of redistributed routes, when OSPFv3 redistributes from other protocols.
T/F agentOspfv3DefaultMetricConfigured	1.3.6.1.4.1.7244.2.30.3.2	TruthValue	read-write	Flag to determine whether OSPFv3 default-metric is configured or not.
T/F agentOspfv3DefaultInfoOriginate	1.3.6.1.4.1.7244.2.30.3.3	TruthValue	read-write	Flag to determine, whether OSPFv3 can advertise a default-route learned from another protocol.
T/F agentOspfv3DefaultInfoOriginateAlways	1.3.6.1.4.1.7244.2.30.3.4	TruthValue	read-write	When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
I32 agentOspfv3DefaultInfoOriginateMetric	1.3.6.1.4.1.7244.2.30.3.5	Integer32	read-write	Metric of the default route,which OSPF advertises when learned from other protocol.
T/F agentOspfv3DefaultInfoOriginateMetricConfigured	1.3.6.1.4.1.7244.2.30.3.6	TruthValue	read-write	Flag to determine whether OSPF default-info originate metric is configured or not.
INT agentOspfv3DefaultInfoOriginateMetricType	1.3.6.1.4.1.7244.2.30.3.7	INTEGER	read-write	Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
agentOspfv3RouteRedistTable	1.3.6.1.4.1.7244.2.30.3.8		not-accessible	This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
agentOspfv3RouteRedistEntry	1.3.6.1.4.1.7244.2.30.3.8.1		not-accessible
INT agentOspfv3RouteRedistSource	1.3.6.1.4.1.7244.2.30.3.8.1.1	INTEGER	read-only	Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.
INT agentOspfv3RouteRedistMode	1.3.6.1.4.1.7244.2.30.3.8.1.2	INTEGER	read-write	User enabels/disables route-redistribution for a particular source protocol.
I32 agentOspfv3RouteRedistMetric	1.3.6.1.4.1.7244.2.30.3.8.1.3	Integer32	read-write	Metric used for redistributing a particular source protocol route into OSPF.
T/F agentOspfv3RouteRedistMetricConfigured	1.3.6.1.4.1.7244.2.30.3.8.1.4	TruthValue	read-write	Flag to determine whether OSPF redistribute-metric is configured or not.
INT agentOspfv3RouteRedistMetricType	1.3.6.1.4.1.7244.2.30.3.8.1.5	INTEGER	read-write	Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
U32 agentOspfv3RouteRedistTag	1.3.6.1.4.1.7244.2.30.3.8.1.6	Unsigned32	read-write	It specifies the tag field in routes redistributed by OSPF.
agentOspfv3IfTable	1.3.6.1.4.1.7244.2.30.3.9		not-accessible	The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
agentOspfv3IfEntry	1.3.6.1.4.1.7244.2.30.3.9.1		not-accessible	The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
INT agentOspfv3IfIpMtuIgnoreFlag	1.3.6.1.4.1.7244.2.30.3.9.1.2	INTEGER	read-write	Configures the IP MTU Ignore Flag value for this OSPF interface.
T/F agentOspfv3IfPassiveMode	1.3.6.1.4.1.7244.2.30.3.9.1.3	TruthValue	read-write	Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation.
agentOspfv3LsdbTable	1.3.6.1.4.1.7244.2.30.3.10		not-accessible	The OSPF Process's Link State Database.
agentOspfv3LsdbEntry	1.3.6.1.4.1.7244.2.30.3.10.1		not-accessible	A single Link State Advertisement.
ARE agentOspfv3LsdbAreaId	1.3.6.1.4.1.7244.2.30.3.10.1.1	AreaID	read-only	The 32 bit identifier of the Area from which the LSA was received.
INT agentOspfv3LsdbType	1.3.6.1.4.1.7244.2.30.3.10.1.2	INTEGER	read-only	The type of the link state advertisement. Each link state type has a separate advertise- ment format.
IP agentOspfv3LsdbLsid	1.3.6.1.4.1.7244.2.30.3.10.1.3	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU agentOspfv3LsdbRouterId	1.3.6.1.4.1.7244.2.30.3.10.1.4	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
U32 agentOspfv3LsdbSequence	1.3.6.1.4.1.7244.2.30.3.10.1.5	Unsigned32	read-only	The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
I32 agentOspfv3LsdbAge	1.3.6.1.4.1.7244.2.30.3.10.1.6	Integer32	read-only	This field is the age of the link state adver- tisement in seconds.
U32 agentOspfv3LsdbChecksum	1.3.6.1.4.1.7244.2.30.3.10.1.7	Unsigned32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
STR agentOspfv3LsdbAdvertisement	1.3.6.1.4.1.7244.2.30.3.10.1.8	DisplayString	read-only	The entire Link State Advertisement, including its header.
AUT agentOspfv3AutoCostRefBw	1.3.6.1.4.1.7244.2.30.3.14	AutoCostRefBw	read-write	Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.
agentOspfv3AsLsdbTable	1.3.6.1.4.1.7244.2.30.3.18		not-accessible	The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area.
agentOspfv3AsLsdbEntry	1.3.6.1.4.1.7244.2.30.3.18.1		not-accessible	A single Link State Advertisement.
INT agentOspfv3AsLsdbType	1.3.6.1.4.1.7244.2.30.3.18.1.1	INTEGER	read-only	The type of the link state advertisement. Each link state type has a separate advertise- ment format.
IP agentOspfv3AsLsdbLsid	1.3.6.1.4.1.7244.2.30.3.18.1.2	IpAddress	read-only	The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
ROU agentOspfv3AsLsdbRouterId	1.3.6.1.4.1.7244.2.30.3.18.1.3	RouterID	read-only	The 32 bit number that uniquely identifies the originating router in the Autonomous System.
U32 agentOspfv3AsLsdbSequence	1.3.6.1.4.1.7244.2.30.3.18.1.4	Unsigned32	read-only	The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
I32 agentOspfv3AsLsdbAge	1.3.6.1.4.1.7244.2.30.3.18.1.5	Integer32	read-only	This field is the age of the link state adver- tisement in seconds.
I32 agentOspfv3AsLsdbChecksum	1.3.6.1.4.1.7244.2.30.3.18.1.6	Integer32	read-only	This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
OCT agentOspfv3AsLsdbAdvertisement	1.3.6.1.4.1.7244.2.30.3.18.1.7	OCTET STRING	read-only	The entire Link State Advertisement, including its header.
T/F agentOspfv3DefaultPassiveMode	1.3.6.1.4.1.7244.2.30.3.19	TruthValue	read-write	Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPFv3 adjacency formation.

RFC description

Quanta FastPath IPv6 routing configuration and management including OSPF.

Start monitoring Quanta Computer FastPath-based switches, whitebox/ODM platforms (IPv6 unicast routing/OSPFv3 configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ROUTING6-MIB

What Is ROUTING6-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description