OSPF-PRIVATE-MIB

All MIBs › OSPF-PRIVATE-MIB

Organization: Lucent's Concord Technology Center (CTC)

Last Updated: 1999-03-02

Category: Routing

Description: Provides Lucent Cajun private OSPF extensions for routing protocol configuration and adjacency monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OSPF-PRIVATE-MIB?

OSPF-PRIVATE-MIB is a Lucent Cajun private SNMP extension MIB that supplements the standard OSPF MIB with additional configuration and statistics objects for Cajun-branded routing/switching equipment. It belongs to the routing-protocol configuration and performance-monitoring category, exposing global OSPF configuration parameters and global OSPF statistics groups specific to the Cajun implementation. Its role in status monitoring is centered on the software/protocol layer: it helps administrators confirm OSPF is configured as expected on the device and track protocol-level statistics that reveal routing instability or misconfiguration rather than physical hardware sensors. As a 'private' extension, it explicitly depends on and complements the standard OSPF-MIB (RFC 1850/OSPF-MIB), adding Cajun-specific objects not covered by the standard. It is typically deployed on Lucent Cajun switches/routers in enterprise or carrier networks running OSPF, monitored via SNMP alongside the standard OSPF-MIB for a complete view of the routing protocol's health. Engineers can download the OSPF-PRIVATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OSPF-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lucent Cajun switch/router

Monitoring Examples

An administrator would poll cjnOspfGblConfGroup to verify the router's global OSPF configuration, such as router ID or process-wide settings specific to the Cajun implementation, and cjnOspfGblStatsGroup to track protocol-wide statistics like SPF run counts or LSA processing activity. A sudden spike in values within cjnOspfGblStatsGroup could indicate OSPF instability, such as flapping adjacencies or a routing loop causing excessive recalculation. These Cajun-specific groups would typically be monitored alongside the standard OSPF-MIB's neighbor and interface tables for full protocol visibility.

What Can Be Monitored

OSPF global configuration parameters
OSPF global protocol statistics
SPF recalculation/LSA activity indicators

Imported Objects

From Cajun-ROOT

cjnProtocol

OBJECT-IDENTITY

From OSPF-MIB

AreaID
Metric
RouterID
TOSType

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using cjnOspfPathSplit OID:

Select a Lucent Cajun switch/router (private OSPF extensions) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cjnOspfPathSplit into the Find box to locate it in the OID tree, then select it and click OK. The number of OSPF path splits. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cjnOspf	1.3.6.1.4.1.1751.2.43.2.9			Cajun Private OSPF mibs
cjnOspfGblConfGroup	1.3.6.1.4.1.1751.2.43.2.9.1
ROU cjnOspfRouterId	1.3.6.1.4.1.1751.2.43.2.9.1.1	RouterID	read-write	OSPF router-id unique within an autonomous system
INT cjnOspfPathSplitEx	1.3.6.1.4.1.1751.2.43.2.9.1.2	INTEGER	read-write	The number of OSPF path splits.
INT cjnOspfPeMax	1.3.6.1.4.1.1751.2.43.2.9.1.3	INTEGER	read-write	Maximum number of path entries supported by OSPF
INT cjnOspfSpfState	1.3.6.1.4.1.1751.2.43.2.9.1.4	INTEGER	read-write	Sets state of OSPF to enabled/disabled
INT cjnOspfAsbdrStatus	1.3.6.1.4.1.1751.2.43.2.9.1.5	INTEGER	read-write	Sets flag for router to be as an Autonomous system boundary router enabled/disabled
INT cjnOspfAutoVLinkCreate	1.3.6.1.4.1.1751.2.43.2.9.1.6	INTEGER	read-write	Sets flag for automatic creation of virtual link enabled/disabled
INT cjnOspfSpfHold	1.3.6.1.4.1.1751.2.43.2.9.1.7	INTEGER	read-write	Time between two consecutive SPF chunks in seconds
INT cjnOspfSpfSuspendTime	1.3.6.1.4.1.1751.2.43.2.9.1.8	INTEGER	read-write	Sets the maximum number of LSAs to be used in each SPF chunk
INT cjnOspfLocalExtType	1.3.6.1.4.1.1751.2.43.2.9.1.9	INTEGER	read-write	Sets the metric type for local ext routes to 1 or 2
INT cjnOspfRipExtType	1.3.6.1.4.1.1751.2.43.2.9.1.10	INTEGER	read-write	Sets the metric type for RIP ext routes to 1 or 2
INT cjnOspfSpfStaticExtType	1.3.6.1.4.1.1751.2.43.2.9.1.11	INTEGER	read-write	Sets the metric type for static ext routes to 1 or 2
INT cjnOspfLowExtType	1.3.6.1.4.1.1751.2.43.2.9.1.12	INTEGER	read-write	Sets the metric type for low preference static routes ext routes to 1 or 2
INT cjnOspfTraceFlags	1.3.6.1.4.1.1751.2.43.2.9.1.13	INTEGER	read-write	Sets packet tracing for OSPF to on/off
INT cjnOspfGlobalStatsReset	1.3.6.1.4.1.1751.2.43.2.9.1.14	INTEGER	read-write	When set to the value enable (1) all OSPF statistics are reset to zero after which the value of this MIB object returns to disable(2)
cjnOspfGblStatsGroup	1.3.6.1.4.1.1751.2.43.2.9.2
INT cjnOspfTOSCount	1.3.6.1.4.1.1751.2.43.2.9.2.1	INTEGER	read-only	The number of types of services supported by OSPF.
INT cjnOspfRunSpf	1.3.6.1.4.1.1751.2.43.2.9.2.2	INTEGER	read-only	Number of times the SPF calculation has been run
INT cjnOspfAbdrStatus	1.3.6.1.4.1.1751.2.43.2.9.2.3	INTEGER	read-only	Shows the state of the router as an Area border router enabled/disabled
INT cjnOspfTxNewLsa	1.3.6.1.4.1.1751.2.43.2.9.2.4	INTEGER	read-only	Shows the number of new link State Advertisements transmitted
INT cjnOspfRxNewLsa	1.3.6.1.4.1.1751.2.43.2.9.2.5	INTEGER	read-only	Shows the number of new lsas received
INT cjnOspfRxHelloCnt	1.3.6.1.4.1.1751.2.43.2.9.2.6	INTEGER	read-only	Shows number of hello messages received
INT cjnOspfTxHelloCnt	1.3.6.1.4.1.1751.2.43.2.9.2.7	INTEGER	read-only	Shows number of hello messages transmitted
INT cjnOspfRxDBDescCnt	1.3.6.1.4.1.1751.2.43.2.9.2.8	INTEGER	read-only	Shows number of data base description packets received
INT cjnOspfTxDBDescCnt	1.3.6.1.4.1.1751.2.43.2.9.2.9	INTEGER	read-only	Shows number of data base description packets transmitted
INT cjnOspfRxLsaAckCnt	1.3.6.1.4.1.1751.2.43.2.9.2.10	INTEGER	read-only	Shows number of LSA ack packets received
INT cjnOspfTxLsaAckCnt	1.3.6.1.4.1.1751.2.43.2.9.2.11	INTEGER	read-only	Shows number of LSA ack packets transmitted
INT cjnOspfRxLsaUpdCnt	1.3.6.1.4.1.1751.2.43.2.9.2.12	INTEGER	read-only	Shows number of LSA update packets received
INT cjnOspfTxLsaUpdCnt	1.3.6.1.4.1.1751.2.43.2.9.2.13	INTEGER	read-only	Shows number of LSA update packets transmitted
INT cjnOspfRxLsaReqCnt	1.3.6.1.4.1.1751.2.43.2.9.2.14	INTEGER	read-only	Shows number of LSA request packets received
INT cjnOspfTxLsaReqCnt	1.3.6.1.4.1.1751.2.43.2.9.2.15	INTEGER	read-only	Shows number of LSA request packets transmitted
cjnOspfIfTable	1.3.6.1.4.1.1751.2.43.2.9.3		not-accessible
cjnOspfIfEntry	1.3.6.1.4.1.1751.2.43.2.9.3.1		not-accessible
IP cjnOspfIfIpAddress	1.3.6.1.4.1.1751.2.43.2.9.3.1.1	IpAddress	read-only	The interface ip address
ROW cjnOspfIfRowStatus	1.3.6.1.4.1.1751.2.43.2.9.3.1.2	RowStatus	read-create	The Status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)
ARE cjnOspfIfAreaId	1.3.6.1.4.1.1751.2.43.2.9.3.1.3	AreaID	read-create	The id of the area in which interface has been configured
IP cjnOspfIfMask	1.3.6.1.4.1.1751.2.43.2.9.3.1.4	IpAddress	read-only	The network mask for the ip network the interface belongs to
INT cjnOspfIfType	1.3.6.1.4.1.1751.2.43.2.9.3.1.5	INTEGER	read-only	The media type of the interface ( bcast, point to point, point to multipoint )
INT cjnOspfIfCost	1.3.6.1.4.1.1751.2.43.2.9.3.1.6	INTEGER	read-create	The cost associted with the interface used to determine the path cost when interface is used as a next hop
ROU cjnOspfIfDrRouterId	1.3.6.1.4.1.1751.2.43.2.9.3.1.7	RouterID	read-only	The router id of the designated router on the network the interface belongs to
IP cjnOspfIfDrIpAddr	1.3.6.1.4.1.1751.2.43.2.9.3.1.8	IpAddress	read-only	The ip address of the interface on which packets are received from the designated router for the network the interface belongs to
INT cjnOspfIfBDrRouterId	1.3.6.1.4.1.1751.2.43.2.9.3.1.9	INTEGER	read-only	The router id of the back up designated router on the network the interface belongs to
INT cjnOspfIfDrState	1.3.6.1.4.1.1751.2.43.2.9.3.1.10	INTEGER	read-only	The designated router status of the interface ( DR, BDR or NoDR )
INT cjnOspfIfHelloTimer	1.3.6.1.4.1.1751.2.43.2.9.3.1.11	INTEGER	read-create	The value of Hello timer for the interface with a default value of 10 seconds
INT cjnOspfIfDeadInterval	1.3.6.1.4.1.1751.2.43.2.9.3.1.12	INTEGER	read-create	The value of dead interval timer for the interface with a default value of 40 seconds
INT cjnOspfIfRtrPriority	1.3.6.1.4.1.1751.2.43.2.9.3.1.13	INTEGER	read-create	The interface priority used in the designated router election on the network the interface belongs to
INT cjnOspfIfRxmtTimer	1.3.6.1.4.1.1751.2.43.2.9.3.1.14	INTEGER	read-create	The value of retransmit timer for the interface used to retransmit all the data description packets and link state advertisements packets requiring an ack or response with a default value of 5 seconds
INT cjnOspfIfTransitDelay	1.3.6.1.4.1.1751.2.43.2.9.3.1.15	INTEGER	read-create	The delay in the packet transmission via the interface (default value is 1 second)
OCT cjnOspfIfAuthKey	1.3.6.1.4.1.1751.2.43.2.9.3.1.16	OCTET STRING	read-create	An eight character long simple password used for simple authentication type on an interface if authentication type is set to one. All the interfacew with OSPF enabled need to have the same authentication type to form adjacencies or exchange OSPF traffic
INT cjnOspfIfMd5KeyId	1.3.6.1.4.1.1751.2.43.2.9.3.1.17	INTEGER	read-create	MD5 key id used for type 2 authentication on an OSPF interface
OCT cjnOspfIfMd5KeyFlags	1.3.6.1.4.1.1751.2.43.2.9.3.1.18	OCTET STRING	read-create	flags used for type 2 authentication on an OSPF interface
OCT cjnOspfIfMd5Key	1.3.6.1.4.1.1751.2.43.2.9.3.1.19	OCTET STRING	read-create	The 16 character long MD5 key used for type 2 authentication on an OSPF interface
INT cjnOspfIfAuthType	1.3.6.1.4.1.1751.2.43.2.9.3.1.20	INTEGER	read-create	The OSPF authentication type( 0, 1 or 2 )
INT cjnOspfIfMtu	1.3.6.1.4.1.1751.2.43.2.9.3.1.21	INTEGER	read-only	The maximum length of the packet transmitted on an OSPF interface
INT cjnOspfIfPollInterval	1.3.6.1.4.1.1751.2.43.2.9.3.1.22	INTEGER	read-create	The value of Poll timer for the interface with a default value of 120 seconds
cjnOspfVirtIfTable	1.3.6.1.4.1.1751.2.43.2.9.4		not-accessible	Information about this router's virtual inter- faces.
cjnOspfVirtIfEntry	1.3.6.1.4.1.1751.2.43.2.9.4.1		not-accessible	Information about a single Virtual Interface.
ARE cjnOspfVirtIfAreaId	1.3.6.1.4.1.1751.2.43.2.9.4.1.1	AreaID	read-create	The virtual link's transit area area-id
ROU cjnOspfVirtIfNbrRtrId	1.3.6.1.4.1.1751.2.43.2.9.4.1.2	RouterID	read-create	The router id of the router on the other end of the virtual link
ROW cjnOspfVirtIfRowStatus	1.3.6.1.4.1.1751.2.43.2.9.4.1.3	RowStatus	read-create	The Status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)
ROU cjnOspfVirtIfDrRouterId	1.3.6.1.4.1.1751.2.43.2.9.4.1.4	RouterID	read-only	The router id of the designated router on the network the virtual interface belongs to
IP cjnOspfVirtIfDrIpAddr	1.3.6.1.4.1.1751.2.43.2.9.4.1.5	IpAddress	read-only	The ip address of the interface on which packets are received from the designated router on the network the virtual interfcae belongs to
ROU cjnOspfVirtIfBDrRouterId	1.3.6.1.4.1.1751.2.43.2.9.4.1.6	RouterID	read-only	The router id of the backup designated router on the network the virtual interface belongs to
INT cjnOspfVirtIfDrState	1.3.6.1.4.1.1751.2.43.2.9.4.1.7	INTEGER	read-only	The designated router state of the virtual interface ( DR, BDR, NoDR )
INT cjnOspfVirtIfHelloTimer	1.3.6.1.4.1.1751.2.43.2.9.4.1.8	INTEGER	read-create	The value of the periodic timer used to retransmit hello packets( default value set to 10 seconds )
INT cjnOspfVirtIfDeadInterval	1.3.6.1.4.1.1751.2.43.2.9.4.1.9	INTEGER	read-create	The value of the one shot timer used to detect if the neighbor is gone with a default value set to 40 seconds
INT cjnOspfVirtIfRtrPriority	1.3.6.1.4.1.1751.2.43.2.9.4.1.10	INTEGER	read-create	The virtual interface priority used during the DR/BDR election with a default value of 1
INT cjnOspfVirtIfRxmtTimer	1.3.6.1.4.1.1751.2.43.2.9.4.1.11	INTEGER	read-create	The retransmit timer used to retarnsmit all OSPF packets requiring a response or ack with a default value set to 5 seconds
INT cjnOspfVirtIfTransitDelay	1.3.6.1.4.1.1751.2.43.2.9.4.1.12	INTEGER	read-create	The delay in transmission of the via the virtual interface with a default value set to 1 second
OCT cjnOspfVirtIfAuthKey	1.3.6.1.4.1.1751.2.43.2.9.4.1.13	OCTET STRING	read-create	The eight character long simple password on a virtual link
OCT cjnOspfVirtIfMd5Key	1.3.6.1.4.1.1751.2.43.2.9.4.1.14	OCTET STRING	read-create	The 16 character long password for type 2 authentication on a virtual link
INT cjnOspfVirtIfMd5KeyId	1.3.6.1.4.1.1751.2.43.2.9.4.1.15	INTEGER	read-create	The key id used in md5 authentication type on a virtual link
OCT cjnOspfVirtIfMd5KeyFlags	1.3.6.1.4.1.1751.2.43.2.9.4.1.16	OCTET STRING	read-create	The flags used in defining type 2 authentication on a virtual interface
INT cjnOspfVirtIfAuthType	1.3.6.1.4.1.1751.2.43.2.9.4.1.17	INTEGER	read-create	The types of authentication supported on a virtual interface( 0, 1, 2 )
cjnOspfAreaTable	1.3.6.1.4.1.1751.2.43.2.9.5		not-accessible	The OSPF Area Table
cjnOspfAreaEntry	1.3.6.1.4.1.1751.2.43.2.9.5.1		not-accessible	Each entry decsribes an OSPF Area that is part of the autonomous system
ARE cjnOspfAreaId	1.3.6.1.4.1.1751.2.43.2.9.5.1.1	AreaID	read-only	Defines id number for an OSPF area
ROW cjnOspfAreaRowStatus	1.3.6.1.4.1.1751.2.43.2.9.5.1.2	RowStatus	read-create	The Status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)
INT cjnOspfAreaType	1.3.6.1.4.1.1751.2.43.2.9.5.1.3	INTEGER	read-create	Sets stub flag for an OSPF area to on/off
INT cjnOspfAreaTranslate	1.3.6.1.4.1.1751.2.43.2.9.5.1.4	INTEGER	read-create	Turns the flag to translate type 7 lsa into type 5 to on/off for an OSPF area
INT cjnOspfAreaStubCost	1.3.6.1.4.1.1751.2.43.2.9.5.1.5	INTEGER	read-create	Defines the cost for defaults routes advertised into stub area by an area border router
INT cjnOspfAreaT3Filter	1.3.6.1.4.1.1751.2.43.2.9.5.1.6	INTEGER	read-create	sets the filtering of type 3 ase lsa into an OSPF area to on/off
INT cjnOspfAreaSpfRuns	1.3.6.1.4.1.1751.2.43.2.9.5.1.7	INTEGER	read-only	The number of times SPF has been run in an OSPF area
INT cjnOspfAreaAbdrCnt	1.3.6.1.4.1.1751.2.43.2.9.5.1.8	INTEGER	read-only	The number of area border routers in an OSPF area
INT cjnOspfAreaAsbdrCnt	1.3.6.1.4.1.1751.2.43.2.9.5.1.9	INTEGER	read-only	The number of autonomous system boundary routers in an OSPF area
INT cjnOspfAreaNetCnt	1.3.6.1.4.1.1751.2.43.2.9.5.1.10	INTEGER	read-only	The number networks configured in an OSPF area
cjnOspfCnfgRangeTable	1.3.6.1.4.1.1751.2.43.2.9.6		not-accessible
cjnOspfCnfgRangeEntry	1.3.6.1.4.1.1751.2.43.2.9.6.1		not-accessible	Each entry describes an address range summary
ARE cjnOspfCnfgRangeAreaId	1.3.6.1.4.1.1751.2.43.2.9.6.1.1	AreaID	read-create	OSPF area id for an area in which the range of ip addresses is to be configured
IP cjnOspfCnfgRangeIpAddr	1.3.6.1.4.1.1751.2.43.2.9.6.1.2	IpAddress	read-create	The starting network number for a range of ip addresses to be configured
IP cjnOspfCnfgRangeMask	1.3.6.1.4.1.1751.2.43.2.9.6.1.3	IpAddress	read-create	The ip network mask for a range of ip addresses to be configured
ROW cjnOspfCnfgRowStatus	1.3.6.1.4.1.1751.2.43.2.9.6.1.4	RowStatus	read-create	The Status of this entry in the table. Note the available states: active(1), -- Obviously Active on this entry. notInService(2) -- Configured on Interface but disabled. notReady(3), -- entry NOT FULLY configured. createAndGo(4), createAndWait(5) or destroy(6)
INT cjnOspfCnfgRangeAdv	1.3.6.1.4.1.1751.2.43.2.9.6.1.5	INTEGER	read-create	Flag to set the advertisement of a given ip netwoks range to on/off
cjnOspfNbrTable	1.3.6.1.4.1.1751.2.43.2.9.7		not-accessible
cjnOspfNbrEntry	1.3.6.1.4.1.1751.2.43.2.9.7.1		not-accessible	Each entry describes a reachable neighbor, per interface, per area
IP cjnOspfNbrIpAddr	1.3.6.1.4.1.1751.2.43.2.9.7.1.1	IpAddress	read-only	The ip address of the router on which the neighbor exists
INT cjnOspfNbrState	1.3.6.1.4.1.1751.2.43.2.9.7.1.2	INTEGER	read-only	ospf state with respect to the router during and after the data base description process
ROU cjnOspfNbrRtrId	1.3.6.1.4.1.1751.2.43.2.9.7.1.3	RouterID	read-only	OSPF router id of the neighbor
INT cjnOspfNbrMasterSlave	1.3.6.1.4.1.1751.2.43.2.9.7.1.4	INTEGER	read-only	The OSPF neighbor master-slave state
INT cjnOspfNbrDrIpAddr	1.3.6.1.4.1.1751.2.43.2.9.7.1.5	INTEGER	read-only	The ip address of the interface on which the designated router for the Neighbor router exists
IP cjnOspfNbrBackUpIpAddr	1.3.6.1.4.1.1751.2.43.2.9.7.1.6	IpAddress	read-only	The ip address of the interface on which the backup designated router for the Neighbor router exists
INT cjnOspfNbrDDNum	1.3.6.1.4.1.1751.2.43.2.9.7.1.7	INTEGER	read-only	The sequence number in the data description packet received from the neighbor during the data base description process
cjnOspfLsaHdrTable	1.3.6.1.4.1.1751.2.43.2.9.8		not-accessible	The OSPF Process's Link State Database.
cjnOspfLsaHdrEntry	1.3.6.1.4.1.1751.2.43.2.9.8.1		not-accessible	A single Link State Advertisement.
ARE cjnOspfLsaHdrAreaId	1.3.6.1.4.1.1751.2.43.2.9.8.1.1	AreaID	read-only	The type (1..11) of link state advertisement in the link state advertisement packet header
INT cjnOspfLsaHdrLsaType	1.3.6.1.4.1.1751.2.43.2.9.8.1.2	INTEGER	read-only	The type (1..11) of link state advertisement in the link state advertisement packet header
IP cjnOspfLsaHdrAdvRtrId	1.3.6.1.4.1.1751.2.43.2.9.8.1.3	IpAddress	read-only	The router id of the advertising router in the link state advertisement header
IP cjnOspfLsaHdrLsId	1.3.6.1.4.1.1751.2.43.2.9.8.1.4	IpAddress	read-only	The four byte link state id in a link state advertisement header
INT cjnOspfLsaHdrLsaAge	1.3.6.1.4.1.1751.2.43.2.9.8.1.5	INTEGER	read-only	The link state advertisement age in the link state advertisement header
INT cjnOspfLsaHdrChecksum	1.3.6.1.4.1.1751.2.43.2.9.8.1.6	INTEGER	read-only	The link state advertisement checksum in the link state advertisement header
INT cjnOspfLsaHdrSequence	1.3.6.1.4.1.1751.2.43.2.9.8.1.7	INTEGER	read-only	The 32 bit link state advertisement sequence number in the link state advertisement header
cjnOspfExtLsdbTable	1.3.6.1.4.1.1751.2.43.2.9.9		not-accessible	The OSPF Process's Link State Database.
cjnOspfExtLsdbEntry	1.3.6.1.4.1.1751.2.43.2.9.9.1		not-accessible	A single Ext Link State Advertisement.
INT cjnOspfExtLsdbType	1.3.6.1.4.1.1751.2.43.2.9.9.1.1	INTEGER	read-only	The type of external link state advertisement in the link state advertisement packet header
IP cjnOspfExtLsdbAdvRtrId	1.3.6.1.4.1.1751.2.43.2.9.9.1.2	IpAddress	read-only	The router id of the router advertising the external link state advertisement
IP cjnOspfExtLsdbLsId	1.3.6.1.4.1.1751.2.43.2.9.9.1.3	IpAddress	read-only	The link state id in the external link state advertisement packet header
INT cjnOspfExtLsdbAge	1.3.6.1.4.1.1751.2.43.2.9.9.1.4	INTEGER	read-only	The link state advertisement age of the external link state advertisement
INT cjnOspfExtLsdbLsdbChecksum	1.3.6.1.4.1.1751.2.43.2.9.9.1.5	INTEGER	read-only	The link state advertisement checksum of the external link state advertisement
INT cjnOspfExtLsdbSequence	1.3.6.1.4.1.1751.2.43.2.9.9.1.6	INTEGER	read-only	The link state advertisement sequence number of the external link state advertisement
IP cjnOspfExtLsdNetMask	1.3.6.1.4.1.1751.2.43.2.9.9.1.7	IpAddress	read-only	The network mask of the network being advertised in the external link state advertisement
TOS cjnOspfExtLsdbTOS	1.3.6.1.4.1.1751.2.43.2.9.9.1.8	TOSType	read-only	The type of service advertised in the external link state advertisement
MET cjnOspfExtLsdbMetric	1.3.6.1.4.1.1751.2.43.2.9.9.1.9	Metric	read-only	The metric associated for the network being advertised in the external link state advertisement
IP cjnOspfExtLsdForwardingAddress	1.3.6.1.4.1.1751.2.43.2.9.9.1.10	IpAddress	read-only	The next hop address in the external link state advertisement for the network being advertised
IP cjnOspfExtLsdbRouteTag	1.3.6.1.4.1.1751.2.43.2.9.9.1.11	IpAddress	read-only	The 32 bit tag associated with the network being advertised in the external link state advertisement
cjnOspfNetLsdbTable	1.3.6.1.4.1.1751.2.43.2.9.10		not-accessible	The OSPF Process's Link State Database.
cjnOspfNetLsdbEntry	1.3.6.1.4.1.1751.2.43.2.9.10.1		not-accessible	A single Link State Advertisement.
ARE cjnOspfNetLsdbAreaId	1.3.6.1.4.1.1751.2.43.2.9.10.1.1	AreaID	read-only	The type of netwok link state advertisement (2) in the link state advertisement packet header
INT cjnOspfNetLsdbType	1.3.6.1.4.1.1751.2.43.2.9.10.1.2	INTEGER	read-only	The type of netwok link state advertisement (2) in the link state advertisement packet header
IP cjnOspfNetLsdbAdvRtrId	1.3.6.1.4.1.1751.2.43.2.9.10.1.3	IpAddress	read-only	The router id of the router advertising the network link state advertisement
IP cjnOspfNetLsdbLsId	1.3.6.1.4.1.1751.2.43.2.9.10.1.4	IpAddress	read-only	The link state id in the network link state advertisement packet header
INT cjnOspfNetLsdbAge	1.3.6.1.4.1.1751.2.43.2.9.10.1.5	INTEGER	read-only	The age of the network link state advertisement
INT cjnOspfNetLsdbLsdbChecksum	1.3.6.1.4.1.1751.2.43.2.9.10.1.6	INTEGER	read-only	The checksum of the external link state advertisemen
INT cjnOspfNetLsdbSequence	1.3.6.1.4.1.1751.2.43.2.9.10.1.7	INTEGER	read-only	The sequence number of the external link state advertisemen
IP cjnOspfNetLsdNetMask	1.3.6.1.4.1.1751.2.43.2.9.10.1.8	IpAddress	read-only	The ip mask of the network being advertised by the network link state advertisement
cjnOspfRouterLsdbTable	1.3.6.1.4.1.1751.2.43.2.9.11		not-accessible	The OSPF Process's Link State Database.
cjnOspfRouterLsdbEntry	1.3.6.1.4.1.1751.2.43.2.9.11.1		not-accessible	A single Link State Advertisement.
ARE cjnOspfRouterLsdbAreaId	1.3.6.1.4.1.1751.2.43.2.9.11.1.1	AreaID	read-only
INT cjnOspfRouterLsdbType	1.3.6.1.4.1.1751.2.43.2.9.11.1.2	INTEGER	read-only	The type of the link being advertised in the router link state advertisement
IP cjnOspfRouterLsdbRtrId	1.3.6.1.4.1.1751.2.43.2.9.11.1.3	IpAddress	read-only
IP cjnOspfRouterLsdbLsId	1.3.6.1.4.1.1751.2.43.2.9.11.1.4	IpAddress	read-only	The link state id (1) associated with links advertised in the router link state advertisement
INT cjnOspfRouterLsdbLinkData	1.3.6.1.4.1.1751.2.43.2.9.11.1.5	INTEGER	read-only	The link data associated with links advertised in the router link state advertisement
INT cjnOspfRouterLsdbNumOfTos	1.3.6.1.4.1.1751.2.43.2.9.11.1.6	INTEGER	read-only	The type of service for the link being advertised in the router link state advertisement
INT cjnOspfRouterLsdbMet	1.3.6.1.4.1.1751.2.43.2.9.11.1.7	INTEGER	read-only	The metric type associated with the link being advertised in the router link state advertisement
cjnOspfRouterLsaHdrTable	1.3.6.1.4.1.1751.2.43.2.9.12		not-accessible	The OSPF Process's Router LSA header Database.
cjnOspfRouterLsaHdrEntry	1.3.6.1.4.1.1751.2.43.2.9.12.1		not-accessible	A single Link State Advertisement.
ARE cjnOspfRouterLsaHdrAreaId	1.3.6.1.4.1.1751.2.43.2.9.12.1.1	AreaID	read-only
INT cjnOspfRouterLsaHdrType	1.3.6.1.4.1.1751.2.43.2.9.12.1.2	INTEGER	read-only	The router link type( 1 )
IP cjnOspfRouterLsaHdrAdvRtrId	1.3.6.1.4.1.1751.2.43.2.9.12.1.3	IpAddress	read-only	The router id of the router advertising of the router link state advertisement
IP cjnOspfRouterLsaHdrLsId	1.3.6.1.4.1.1751.2.43.2.9.12.1.4	IpAddress	read-only	The link state id in the router link state advertisement packet header
INT cjnOspfRouterLsaHdrAge	1.3.6.1.4.1.1751.2.43.2.9.12.1.5	INTEGER	read-only	The age of the router link state advertisement
INT cjnOspfRouterLsaHdrChecksum	1.3.6.1.4.1.1751.2.43.2.9.12.1.6	INTEGER	read-only	The checksum of the router link state advertisemen
INT cjnOspfRouterLsaHdrSequence	1.3.6.1.4.1.1751.2.43.2.9.12.1.7	INTEGER	read-only	The sequence number of the router link state advertisement
INT cjnOspfRouterLsaHdrFlags	1.3.6.1.4.1.1751.2.43.2.9.12.1.8	INTEGER	read-only	The flags in the router link state advertisement
INT cjnOspfRouterLsaHdrLinkCount	1.3.6.1.4.1.1751.2.43.2.9.12.1.9	INTEGER	read-only	number of links being advertised in the router link state advertisement
cjnOspfSumLsaTable	1.3.6.1.4.1.1751.2.43.2.9.13		not-accessible	The OSPF Process's Link State Database.
cjnOspfSumLsaEntry	1.3.6.1.4.1.1751.2.43.2.9.13.1		not-accessible	A single Ext Link State Advertisement.
INT cjnOspfSumLsaType	1.3.6.1.4.1.1751.2.43.2.9.13.1.1	INTEGER	read-only	The type of summary link state advertisement (3 or 4) in the link state advertisement packet header
IP cjnOspfSumLsaAdvRtrId	1.3.6.1.4.1.1751.2.43.2.9.13.1.2	IpAddress	read-only	The router id of the router advertising the summary link state advertisement
IP cjnOspfSumLsaLsId	1.3.6.1.4.1.1751.2.43.2.9.13.1.3	IpAddress	read-only	The link state id of the summary link state advertisement packet header
INT cjnOspfSumLsaLsdbAge	1.3.6.1.4.1.1751.2.43.2.9.13.1.4	INTEGER	read-only	The age of the summary link state advertisement
INT cjnOspfSumLsaChecksum	1.3.6.1.4.1.1751.2.43.2.9.13.1.5	INTEGER	read-only	The checksum of the summary link state advertisement
INT cjnOspfSumLsaSequence	1.3.6.1.4.1.1751.2.43.2.9.13.1.6	INTEGER	read-only	The checksum of the summary link state advertisement
IP cjnOspfSumLsaMask	1.3.6.1.4.1.1751.2.43.2.9.13.1.7	IpAddress	read-only	The network mask of the type 3 summay link state advertisement
TOS cjnOspfSumLsaTOS	1.3.6.1.4.1.1751.2.43.2.9.13.1.8	TOSType	read-only	The type of service for the network advertised by the type 3 summary link state advertisement
MET cjnOspfSumLsaMetric	1.3.6.1.4.1.1751.2.43.2.9.13.1.9	Metric	read-only	The metric type for the network advertised by the type 3 summary link state advertisemen

RFC description

Provides private OSPF routing protocol configuration and management for Lucent Concord technology routers.

Start monitoring Lucent Cajun switch/router (private OSPF extensions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OSPF-PRIVATE-MIB