All MIBs › ROOMALERT32E-MIB
Category: Environmental Monitoring
Description: Manages AVTECH Room Alert 32E rack environment monitor sensors, thresholds, and alert states.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ROOMALERT32E-MIB?
ROOMALERT32E-MIB manages the AVTECH Room Alert 32E, a rack/room environmental monitoring appliance, exposing readings from its onboard and connected sensors. Data categories include internal temperature (Fahrenheit and Celsius), internal humidity, computed heat index, internal power status, analog sensor inputs, and multiple digital sensor channels. This is a hardware environmental-status MIB used to monitor physical conditions around IT equipment: temperature and humidity trends, heat index for comfort/risk assessment, power status of the monitor itself, and digital sensor states (e.g. door contacts, water leak detectors) attached to the unit. It has no strong dependency on other standard MIBs, being a self-contained AVTECH enterprise MIB. It is typically deployed in server rooms, network closets, and data centers to provide early warning of cooling failures, power loss, or physical security events via SNMP polling or traps. Engineers can download the ROOMALERT32E-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ROOMALERT32E-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- AVTECH Room Alert 32E environmental monitor
Monitoring Examples
An admin would poll internal-tempf/internal-tempc and internal-humidity to track ambient conditions in the room, alongside internal-heat-index for a combined comfort/risk metric, and internal-power to confirm the Room Alert unit itself has stable power. The digital-sen1-1 through digital-sen1-4 objects report the state of attached digital sensors (e.g. door, water, motion), so a state change on digital-sen1-2 could indicate a door was opened or a leak was detected. A rising internal-tempc value combined with normal internal-power would point to an HVAC failure rather than a power issue.
What Can Be Monitored
- internal temperature (F/C)
- internal humidity
- heat index
- unit power status
- analog sensor inputs
- digital sensor channel states
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| avtech | 1.3.6.1.4.1.20916 | |||
| products | 1.3.6.1.4.1.20916.1 | |||
| roomalert32E | 1.3.6.1.4.1.20916.1.8 | |||
| NTF tempalarm1_32E | 1.3.6.1.4.1.20916.1.8.0.1 | A tempalarm1 trap signifies that the current temperature on external sensor 1 is outside the defined high or low threshold. | ||
| NTF room_alert_32E_snmp_trap | 1.3.6.1.4.1.20916.1.8.0.2 | A room-alert-32E-snmp-trap indicates that an alarm condition has occurred on the sensor inidcated by the alarmMessage variable. | ||
| NTF tempalarm2_32E | 1.3.6.1.4.1.20916.1.8.0.3 | A tempalarm2 trap signifies that the current temperature on external sensor 2 is outside the defined high or low threshold. | ||
| NTF tempclear2_32E | 1.3.6.1.4.1.20916.1.8.0.4 | A tempclear2 trap signifies that the current temperature on external sensor 2 has returned to a normal condition and is within the defined high or low threshold. | ||
| NTF tempalarm3_32E | 1.3.6.1.4.1.20916.1.8.0.5 | A tempalarm3 trap signifies that the current temperature on external sensor 3 is outside the defined high or low threshold. | ||
| NTF tempclear3_32E | 1.3.6.1.4.1.20916.1.8.0.6 | A tempclear3 trap signifies that the current temperature on external sensor 3 has returned to a normal condition and is within the defined high or low threshold. | ||
| NTF humidityalarm1_32E | 1.3.6.1.4.1.20916.1.8.0.7 | A humidityalarm1 trap signifies that the current humidity on external sensor 1 is outside the defined high or low threshold. | ||
| NTF humidityclear1_32E | 1.3.6.1.4.1.20916.1.8.0.8 | A humidityclear1 trap signifies that the current humidity on external sensor 1 has returned to a normal condition and is within the defined high or low threshold. | ||
| NTF humidityalarm2_32E | 1.3.6.1.4.1.20916.1.8.0.9 | A humidityalarm2 trap signifies that the current humidity on external sensor 2 is outside the defined high or low threshold. | ||
| NTF humidityclear2_32E | 1.3.6.1.4.1.20916.1.8.0.10 | A humidityclear2 trap signifies that the current humidity on external sensor 2 has returned to a normal condition and is within the defined high or low threshold. | ||
| NTF humidityalarm3_32E | 1.3.6.1.4.1.20916.1.8.0.11 | A humidityalarm3 trap signifies that the current humidity on external sensor 3 is outside the defined high or low threshold. | ||
| NTF humidityclear3_32E | 1.3.6.1.4.1.20916.1.8.0.12 | A humidityclear3 trap signifies that the current humidity on external sensor 3 has returned to a normal condition and is within the defined high or low threshold. | ||
| NTF switchalarm1_32E | 1.3.6.1.4.1.20916.1.8.0.13 | A switchalarm1 trap signifies that switch sensor 1 is in an alarm state. | ||
| NTF switchclear1_32E | 1.3.6.1.4.1.20916.1.8.0.14 | A switchclear1 trap signifies that the switch sensor 1 has returned to a normal state. | ||
| NTF switchalarm2_32E | 1.3.6.1.4.1.20916.1.8.0.15 | A switchalarm2 trap signifies that switch sensor 2 is in an alarm state. | ||
| NTF switchclear2_32E | 1.3.6.1.4.1.20916.1.8.0.16 | A switchclear2 trap signifies that the switch sensor 2 has returned to a normal state. | ||
| NTF switchalarm3_32E | 1.3.6.1.4.1.20916.1.8.0.17 | A switchalarm3 trap signifies that switch sensor 3 is in an alarm state. | ||
| NTF switchclear3_32E | 1.3.6.1.4.1.20916.1.8.0.18 | A switchclear3 trap signifies that the switch sensor 3 has returned to a normal state. | ||
| NTF switchalarm4_32E | 1.3.6.1.4.1.20916.1.8.0.19 | A switchalarm4 trap signifies that switch sensor 4 is in an alarm state. | ||
| NTF switchclear4_32E | 1.3.6.1.4.1.20916.1.8.0.20 | A switchclear4 trap signifies that the switch sensor 4 has returned to a normal state. | ||
| NTF switchalarm5_32E | 1.3.6.1.4.1.20916.1.8.0.21 | A switchalarm5 trap signifies that switch sensor 5 is in an alarm state. | ||
| NTF switchclear5_32E | 1.3.6.1.4.1.20916.1.8.0.22 | A switchclear5 trap signifies that the switch sensor 5 has returned to a normal state. | ||
| NTF switchalarm6_32E | 1.3.6.1.4.1.20916.1.8.0.23 | A switchalarm6 trap signifies that switch sensor 6 is in an alarm state. | ||
| NTF switchclear6_32E | 1.3.6.1.4.1.20916.1.8.0.24 | A switchclear6 trap signifies that the switch sensor 6 has returned to a normal state. | ||
| NTF switchalarm7_32E | 1.3.6.1.4.1.20916.1.8.0.25 | A switchalarm7 trap signifies that switch sensor 7 is in an alarm state. | ||
| NTF switchclear7_32E | 1.3.6.1.4.1.20916.1.8.0.26 | A switchclear7 trap signifies that the switch sensor 7 has returned to a normal state. | ||
| NTF switchalarm8_32E | 1.3.6.1.4.1.20916.1.8.0.27 | A switchalarm8 trap signifies that switch sensor 8 is in an alarm state. | ||
| NTF switchclear8_32E | 1.3.6.1.4.1.20916.1.8.0.28 | A switchclear8 trap signifies that the switch sensor 8 has returned to a normal state. | ||
| sensors | 1.3.6.1.4.1.20916.1.8.1 | |||
| internal | 1.3.6.1.4.1.20916.1.8.1.1 | |||
| temperature | 1.3.6.1.4.1.20916.1.8.1.1.1 | |||
| INT internal_tempf | 1.3.6.1.4.1.20916.1.8.1.1.1.1 | INTEGER | read-only | The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| INT internal_tempc | 1.3.6.1.4.1.20916.1.8.1.1.1.2 | INTEGER | read-only | The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| humidity | 1.3.6.1.4.1.20916.1.8.1.1.2 | |||
| INT internal_humidity | 1.3.6.1.4.1.20916.1.8.1.1.2.1 | INTEGER | read-only | The internal relative humidity reading in %RH. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| power | 1.3.6.1.4.1.20916.1.8.1.1.3 | |||
| INT internal_power | 1.3.6.1.4.1.20916.1.8.1.1.3.1 | INTEGER | read-only | The current status of the Room Alert 32E power supply. A '0' indicates the unit is running on AC/Utility power. A '1' indicates the unit is running on battery backup power. |
| heat_index | 1.3.6.1.4.1.20916.1.8.1.1.4 | |||
| INT internal_heat_index | 1.3.6.1.4.1.20916.1.8.1.1.4.1 | INTEGER | read-only | The internal heat index reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| INT internal_heat_indexC | 1.3.6.1.4.1.20916.1.8.1.1.4.2 | INTEGER | read-only | The internal heat index reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. |
| analog | 1.3.6.1.4.1.20916.1.8.1.1.5 | |||
| INT internal_analog1 | 1.3.6.1.4.1.20916.1.8.1.1.5.1 | INTEGER | read-only | The current status of the Room Alert 32E analog input (0-5VDC). |
| INT internal_analog2 | 1.3.6.1.4.1.20916.1.8.1.1.5.2 | INTEGER | read-only | The current status of the Room Alert 32E analog input (0-5VDC). |
| digital | 1.3.6.1.4.1.20916.1.8.1.2 | |||
| digital_sen1 | 1.3.6.1.4.1.20916.1.8.1.2.1 | |||
| INT digital_sen1_1 | 1.3.6.1.4.1.20916.1.8.1.2.1.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen1_2 | 1.3.6.1.4.1.20916.1.8.1.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen1_3 | 1.3.6.1.4.1.20916.1.8.1.2.1.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen1_4 | 1.3.6.1.4.1.20916.1.8.1.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen1_5 | 1.3.6.1.4.1.20916.1.8.1.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| digital_sen2 | 1.3.6.1.4.1.20916.1.8.1.2.2 | |||
| INT digital_sen2_1 | 1.3.6.1.4.1.20916.1.8.1.2.2.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen2_2 | 1.3.6.1.4.1.20916.1.8.1.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen2_3 | 1.3.6.1.4.1.20916.1.8.1.2.2.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen2_4 | 1.3.6.1.4.1.20916.1.8.1.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen2_5 | 1.3.6.1.4.1.20916.1.8.1.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| digital_sen3 | 1.3.6.1.4.1.20916.1.8.1.2.3 | |||
| INT digital_sen3_1 | 1.3.6.1.4.1.20916.1.8.1.2.3.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen3_2 | 1.3.6.1.4.1.20916.1.8.1.2.3.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen3_3 | 1.3.6.1.4.1.20916.1.8.1.2.3.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen3_4 | 1.3.6.1.4.1.20916.1.8.1.2.3.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen3_5 | 1.3.6.1.4.1.20916.1.8.1.2.3.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| digital_sen4 | 1.3.6.1.4.1.20916.1.8.1.2.4 | |||
| INT digital_sen4_1 | 1.3.6.1.4.1.20916.1.8.1.2.4.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen4_2 | 1.3.6.1.4.1.20916.1.8.1.2.4.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen4_3 | 1.3.6.1.4.1.20916.1.8.1.2.4.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen4_4 | 1.3.6.1.4.1.20916.1.8.1.2.4.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen4_5 | 1.3.6.1.4.1.20916.1.8.1.2.4.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| digital_sen5 | 1.3.6.1.4.1.20916.1.8.1.2.5 | |||
| INT digital_sen5_1 | 1.3.6.1.4.1.20916.1.8.1.2.5.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen5_2 | 1.3.6.1.4.1.20916.1.8.1.2.5.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen5_3 | 1.3.6.1.4.1.20916.1.8.1.2.5.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen5_4 | 1.3.6.1.4.1.20916.1.8.1.2.5.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen5_5 | 1.3.6.1.4.1.20916.1.8.1.2.5.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| digital_sen6 | 1.3.6.1.4.1.20916.1.8.1.2.6 | |||
| INT digital_sen6_1 | 1.3.6.1.4.1.20916.1.8.1.2.6.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen6_2 | 1.3.6.1.4.1.20916.1.8.1.2.6.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen6_3 | 1.3.6.1.4.1.20916.1.8.1.2.6.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen6_4 | 1.3.6.1.4.1.20916.1.8.1.2.6.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen1_6 | 1.3.6.1.4.1.20916.1.8.1.2.6.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| digital_sen7 | 1.3.6.1.4.1.20916.1.8.1.2.7 | |||
| INT digital_sen7_1 | 1.3.6.1.4.1.20916.1.8.1.2.7.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen7_2 | 1.3.6.1.4.1.20916.1.8.1.2.7.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen7_3 | 1.3.6.1.4.1.20916.1.8.1.2.7.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen7_4 | 1.3.6.1.4.1.20916.1.8.1.2.7.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen7_5 | 1.3.6.1.4.1.20916.1.8.1.2.7.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| digital_sen8 | 1.3.6.1.4.1.20916.1.8.1.2.8 | |||
| INT digital_sen8_1 | 1.3.6.1.4.1.20916.1.8.1.2.8.1 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. |
| INT digital_sen8_2 | 1.3.6.1.4.1.20916.1.8.1.2.8.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. |
| INT digital_sen8_3 | 1.3.6.1.4.1.20916.1.8.1.2.8.3 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. |
| INT digital_sen8_4 | 1.3.6.1.4.1.20916.1.8.1.2.8.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. |
| INT digital_sen8_5 | 1.3.6.1.4.1.20916.1.8.1.2.8.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| switch | 1.3.6.1.4.1.20916.1.8.1.3 | |||
| INT switch_sen1 | 1.3.6.1.4.1.20916.1.8.1.3.1 | INTEGER | read-only | The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen2 | 1.3.6.1.4.1.20916.1.8.1.3.2 | INTEGER | read-only | The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen3 | 1.3.6.1.4.1.20916.1.8.1.3.3 | INTEGER | read-only | The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen4 | 1.3.6.1.4.1.20916.1.8.1.3.4 | INTEGER | read-only | The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen5 | 1.3.6.1.4.1.20916.1.8.1.3.5 | INTEGER | read-only | The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen6 | 1.3.6.1.4.1.20916.1.8.1.3.6 | INTEGER | read-only | The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen7 | 1.3.6.1.4.1.20916.1.8.1.3.7 | INTEGER | read-only | The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen8 | 1.3.6.1.4.1.20916.1.8.1.3.8 | INTEGER | read-only | The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen9 | 1.3.6.1.4.1.20916.1.8.1.3.9 | INTEGER | read-only | The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen10 | 1.3.6.1.4.1.20916.1.8.1.3.10 | INTEGER | read-only | The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen11 | 1.3.6.1.4.1.20916.1.8.1.3.11 | INTEGER | read-only | The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen12 | 1.3.6.1.4.1.20916.1.8.1.3.12 | INTEGER | read-only | The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen13 | 1.3.6.1.4.1.20916.1.8.1.3.13 | INTEGER | read-only | The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen14 | 1.3.6.1.4.1.20916.1.8.1.3.14 | INTEGER | read-only | The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen15 | 1.3.6.1.4.1.20916.1.8.1.3.15 | INTEGER | read-only | The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED). |
| INT switch_sen16 | 1.3.6.1.4.1.20916.1.8.1.3.16 | INTEGER | read-only | The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED). |
| wireless | 1.3.6.1.4.1.20916.1.8.1.4 | |||
| wish_1 | 1.3.6.1.4.1.20916.1.8.1.4.1 | |||
| INT wish_1_enabled | 1.3.6.1.4.1.20916.1.8.1.4.1.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_1_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.1.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_1_updates | 1.3.6.1.4.1.20916.1.8.1.4.1.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_1_sensors | 1.3.6.1.4.1.20916.1.8.1.4.1.4 | |||
| wish_1_internal | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1 | |||
| INT wish_1_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_1_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_1_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_1_external | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2 | |||
| wish_1_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1 | |||
| INT wish_1_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_1_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_1_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_1_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_1_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_1_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_1_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2 | |||
| INT wish_1_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_1_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_1_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_1_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_1_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_1_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_1_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_2 | 1.3.6.1.4.1.20916.1.8.1.4.2 | |||
| INT wish_2_enabled | 1.3.6.1.4.1.20916.1.8.1.4.2.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_2_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.2.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_2_updates | 1.3.6.1.4.1.20916.1.8.1.4.2.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_2_sensors | 1.3.6.1.4.1.20916.1.8.1.4.2.4 | |||
| wish_2_internal | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1 | |||
| INT wish_2_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_2_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_2_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_2_external | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2 | |||
| wish_2_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1 | |||
| INT wish_2_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_2_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_2_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_2_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_2_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_2_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_2_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2 | |||
| INT wish_2_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_2_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_2_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_2_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_2_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_2_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_2_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_3 | 1.3.6.1.4.1.20916.1.8.1.4.3 | |||
| INT wish_3_enabled | 1.3.6.1.4.1.20916.1.8.1.4.3.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_3_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.3.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_3_updates | 1.3.6.1.4.1.20916.1.8.1.4.3.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_3_sensors | 1.3.6.1.4.1.20916.1.8.1.4.3.4 | |||
| wish_3_internal | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1 | |||
| INT wish_3_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_3_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_3_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_3_external | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2 | |||
| wish_3_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1 | |||
| INT wish_3_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_3_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_3_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_3_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_3_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_3_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_3_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2 | |||
| INT wish_3_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_3_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_3_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_3_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_3_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_3_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_3_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_4 | 1.3.6.1.4.1.20916.1.8.1.4.4 | |||
| INT wish_4_enabled | 1.3.6.1.4.1.20916.1.8.1.4.4.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_4_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.4.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_4_updates | 1.3.6.1.4.1.20916.1.8.1.4.4.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_4_sensors | 1.3.6.1.4.1.20916.1.8.1.4.4.4 | |||
| wish_4_internal | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1 | |||
| INT wish_4_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_4_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_4_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_4_external | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2 | |||
| wish_4_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1 | |||
| INT wish_4_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_4_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_4_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_4_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_4_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_4_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_4_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2 | |||
| INT wish_4_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_4_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_4_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_4_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_4_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_4_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_4_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_5 | 1.3.6.1.4.1.20916.1.8.1.4.5 | |||
| INT wish_5_enabled | 1.3.6.1.4.1.20916.1.8.1.4.5.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_5_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.5.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_5_updates | 1.3.6.1.4.1.20916.1.8.1.4.5.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_5_sensors | 1.3.6.1.4.1.20916.1.8.1.4.5.4 | |||
| wish_5_internal | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1 | |||
| INT wish_5_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_5_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_5_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_5_external | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2 | |||
| wish_5_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1 | |||
| INT wish_5_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_5_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_5_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_5_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_5_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_5_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_5_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2 | |||
| INT wish_5_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_5_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_5_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_5_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_5_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_5_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_5_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_6 | 1.3.6.1.4.1.20916.1.8.1.4.6 | |||
| INT wish_6_enabled | 1.3.6.1.4.1.20916.1.8.1.4.6.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_6_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.6.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_6_updates | 1.3.6.1.4.1.20916.1.8.1.4.6.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_6_sensors | 1.3.6.1.4.1.20916.1.8.1.4.6.4 | |||
| wish_6_internal | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1 | |||
| INT wish_6_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_6_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_6_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_6_external | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2 | |||
| wish_6_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1 | |||
| INT wish_6_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_6_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_6_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_6_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_6_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_6_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_6_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2 | |||
| INT wish_6_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_6_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_6_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_6_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_6_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_6_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_6_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_7 | 1.3.6.1.4.1.20916.1.8.1.4.7 | |||
| INT wish_7_enabled | 1.3.6.1.4.1.20916.1.8.1.4.7.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_7_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.7.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_7_updates | 1.3.6.1.4.1.20916.1.8.1.4.7.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_7_sensors | 1.3.6.1.4.1.20916.1.8.1.4.7.4 | |||
| wish_7_internal | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1 | |||
| INT wish_7_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_7_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_7_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_7_external | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2 | |||
| wish_7_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1 | |||
| INT wish_7_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_7_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_7_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_7_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_7_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_7_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_7_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2 | |||
| INT wish_7_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_7_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_7_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_7_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_7_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_7_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_7_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_8 | 1.3.6.1.4.1.20916.1.8.1.4.8 | |||
| INT wish_8_enabled | 1.3.6.1.4.1.20916.1.8.1.4.8.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_8_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.8.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_8_updates | 1.3.6.1.4.1.20916.1.8.1.4.8.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_8_sensors | 1.3.6.1.4.1.20916.1.8.1.4.8.4 | |||
| wish_8_internal | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1 | |||
| INT wish_8_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_8_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_8_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_8_external | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2 | |||
| wish_8_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1 | |||
| INT wish_8_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_8_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_8_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_8_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_8_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_8_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_8_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2 | |||
| INT wish_8_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_8_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_8_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_8_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_8_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_8_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_8_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_9 | 1.3.6.1.4.1.20916.1.8.1.4.9 | |||
| INT wish_9_enabled | 1.3.6.1.4.1.20916.1.8.1.4.9.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_9_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.9.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_9_updates | 1.3.6.1.4.1.20916.1.8.1.4.9.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_9_sensors | 1.3.6.1.4.1.20916.1.8.1.4.9.4 | |||
| wish_9_internal | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1 | |||
| INT wish_9_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_9_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_9_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_9_external | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2 | |||
| wish_9_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1 | |||
| INT wish_9_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_9_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_9_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_9_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_9_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_9_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_9_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2 | |||
| INT wish_9_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_9_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_9_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_9_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_9_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_9_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_9_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| wish_10 | 1.3.6.1.4.1.20916.1.8.1.4.10 | |||
| INT wish_10_enabled | 1.3.6.1.4.1.20916.1.8.1.4.10.1 | INTEGER | read-only | The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. |
| OCT wish_10_serial_num | 1.3.6.1.4.1.20916.1.8.1.4.10.2 | OCTET STRING | read-only | The unique serial number for this WiSH/WiSPR Sensor. |
| INT wish_10_updates | 1.3.6.1.4.1.20916.1.8.1.4.10.3 | INTEGER | read-only | The current update interval for this WiSH/WiSPR Sensor. |
| wish_10_sensors | 1.3.6.1.4.1.20916.1.8.1.4.10.4 | |||
| wish_10_internal | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1 | |||
| INT wish_10_battery_voltage | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1.1 | INTEGER | read-only | The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. |
| INT wish_10_internal_tempc | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1.2 | INTEGER | read-only | The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. |
| INT wish_10_internal_tempf | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1.3 | INTEGER | read-only | The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. |
| wish_10_external | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2 | |||
| wish_10_external_1 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1 | |||
| INT wish_10_external_1_type | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_10_external_1_val1 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_10_external_1_val2 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_10_external_1_val3 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_10_external_1_val4 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_10_external_1_val5 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| wish_10_external_2 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2 | |||
| INT wish_10_external_2_type | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.1 | INTEGER | read-only | The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. |
| INT wish_10_external_2_val1 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.2 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage. |
| INT wish_10_external_2_val2 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.3 | INTEGER | read-only | If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts. |
| INT wish_10_external_2_val3 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.4 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts. |
| INT wish_10_external_2_val4 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.5 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts. |
| INT wish_10_external_2_val5 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.6 | INTEGER | read-only | If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. |
| INT wish_10_external_switch | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.3 | INTEGER | read-only | The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). |
| traps | 1.3.6.1.4.1.20916.1.8.2 | |||
| OCT alarmmessage | 1.3.6.1.4.1.20916.1.8.2.1 | OCTET STRING | read-only | Last Alarm Message |
RFC description
Monitors environmental sensors including temperature, humidity, and power on AVTECH Room Alert 32E monitoring devices.
Start monitoring AVTECH Room Alert 32E environmental monitor (temperature/humidity/heat-index/power/digital sensors) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.