--
--defines ROOMALERT32E-MIB for SNMP agent extension of Room Alert 32E
--Contents:	Global Registration Module
--		Room Alert OIDs - Enterprise 20916
--Version:	1.0.0 
--Date:		15 September 2011
--Developed By: AVTECH Software, Inc.

--
--Copyright (c) 2011 AVTECH Software, Inc.
--

ROOMALERT32E-MIB DEFINITIONS ::= BEGIN


IMPORTS
	enterprises, IpAddress, Counter, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	TRAP-TYPE 
		FROM RFC-1215;


avtech	OBJECT IDENTIFIER ::= { enterprises 20916 }
products	OBJECT IDENTIFIER ::= { avtech 1 }
roomalert32E	OBJECT IDENTIFIER ::= { products 8 }
sensors	OBJECT IDENTIFIER ::= { roomalert32E 1 }
internal	OBJECT IDENTIFIER ::= { sensors 1 }
temperature	OBJECT IDENTIFIER ::= { internal 1 }
humidity	OBJECT IDENTIFIER ::= { internal 2 }
power		OBJECT IDENTIFIER ::= { internal 3 }
heat-index	OBJECT IDENTIFIER ::= { internal 4 }
analog	OBJECT IDENTIFIER ::= { internal 5 }
digital	OBJECT IDENTIFIER ::= { sensors 2 }
digital-sen1	OBJECT IDENTIFIER ::= { digital 1 }
digital-sen2	OBJECT IDENTIFIER ::= { digital 2 }
digital-sen3	OBJECT IDENTIFIER ::= { digital 3 }
digital-sen4	OBJECT IDENTIFIER ::= { digital 4 }
digital-sen5	OBJECT IDENTIFIER ::= { digital 5 }
digital-sen6	OBJECT IDENTIFIER ::= { digital 6 }
digital-sen7	OBJECT IDENTIFIER ::= { digital 7 }
digital-sen8	OBJECT IDENTIFIER ::= { digital 8 }
switch	OBJECT IDENTIFIER ::= { sensors 3 }
wireless	OBJECT IDENTIFIER ::= { sensors 4 }
wish-1	OBJECT IDENTIFIER ::= { wireless 1 }
wish-1-sensors	OBJECT IDENTIFIER ::= { wish-1 4 }
wish-1-internal	OBJECT IDENTIFIER ::= { wish-1-sensors 1 }
wish-1-external	OBJECT IDENTIFIER ::= { wish-1-sensors 2 }
wish-1-external-1	OBJECT IDENTIFIER ::= { wish-1-external 1 }
wish-1-external-2	OBJECT IDENTIFIER ::= { wish-1-external 2 }
wish-2	OBJECT IDENTIFIER ::= { wireless 2 }
wish-2-sensors	OBJECT IDENTIFIER ::= { wish-2 4 }
wish-2-internal	OBJECT IDENTIFIER ::= { wish-2-sensors 1 }
wish-2-external	OBJECT IDENTIFIER ::= { wish-2-sensors 2 }
wish-2-external-1	OBJECT IDENTIFIER ::= { wish-2-external 1 }
wish-2-external-2	OBJECT IDENTIFIER ::= { wish-2-external 2 }
wish-3	OBJECT IDENTIFIER ::= { wireless 3 }
wish-3-sensors	OBJECT IDENTIFIER ::= { wish-3 4 }
wish-3-internal	OBJECT IDENTIFIER ::= { wish-3-sensors 1 }
wish-3-external	OBJECT IDENTIFIER ::= { wish-3-sensors 2 }
wish-3-external-1	OBJECT IDENTIFIER ::= { wish-3-external 1 }
wish-3-external-2	OBJECT IDENTIFIER ::= { wish-3-external 2 }
wish-4	OBJECT IDENTIFIER ::= { wireless 4 }
wish-4-sensors	OBJECT IDENTIFIER ::= { wish-4 4 }
wish-4-internal	OBJECT IDENTIFIER ::= { wish-4-sensors 1 }
wish-4-external	OBJECT IDENTIFIER ::= { wish-4-sensors 2 }
wish-4-external-1	OBJECT IDENTIFIER ::= { wish-4-external 1 }
wish-4-external-2	OBJECT IDENTIFIER ::= { wish-4-external 2 }
wish-5	OBJECT IDENTIFIER ::= { wireless 5 }
wish-5-sensors	OBJECT IDENTIFIER ::= { wish-5 4 }
wish-5-internal	OBJECT IDENTIFIER ::= { wish-5-sensors 1 }
wish-5-external	OBJECT IDENTIFIER ::= { wish-5-sensors 2 }
wish-5-external-1	OBJECT IDENTIFIER ::= { wish-5-external 1 }
wish-5-external-2	OBJECT IDENTIFIER ::= { wish-5-external 2 }
wish-6	OBJECT IDENTIFIER ::= { wireless 6 }
wish-6-sensors	OBJECT IDENTIFIER ::= { wish-6 4 }
wish-6-internal	OBJECT IDENTIFIER ::= { wish-6-sensors 1 }
wish-6-external	OBJECT IDENTIFIER ::= { wish-6-sensors 2 }
wish-6-external-1	OBJECT IDENTIFIER ::= { wish-6-external 1 }
wish-6-external-2	OBJECT IDENTIFIER ::= { wish-6-external 2 }
wish-7	OBJECT IDENTIFIER ::= { wireless 7 }
wish-7-sensors	OBJECT IDENTIFIER ::= { wish-7 4 }
wish-7-internal	OBJECT IDENTIFIER ::= { wish-7-sensors 1 }
wish-7-external	OBJECT IDENTIFIER ::= { wish-7-sensors 2 }
wish-7-external-1	OBJECT IDENTIFIER ::= { wish-7-external 1 }
wish-7-external-2	OBJECT IDENTIFIER ::= { wish-7-external 2 }
wish-8	OBJECT IDENTIFIER ::= { wireless 8 }
wish-8-sensors	OBJECT IDENTIFIER ::= { wish-8 4 }
wish-8-internal	OBJECT IDENTIFIER ::= { wish-8-sensors 1 }
wish-8-external	OBJECT IDENTIFIER ::= { wish-8-sensors 2 }
wish-8-external-1	OBJECT IDENTIFIER ::= { wish-8-external 1 }
wish-8-external-2	OBJECT IDENTIFIER ::= { wish-8-external 2 }
wish-9	OBJECT IDENTIFIER ::= { wireless 9 }
wish-9-sensors	OBJECT IDENTIFIER ::= { wish-9 4 }
wish-9-internal	OBJECT IDENTIFIER ::= { wish-9-sensors 1 }
wish-9-external	OBJECT IDENTIFIER ::= { wish-9-sensors 2 }
wish-9-external-1	OBJECT IDENTIFIER ::= { wish-9-external 1 }
wish-9-external-2	OBJECT IDENTIFIER ::= { wish-9-external 2 }
wish-10	OBJECT IDENTIFIER ::= { wireless 10 }
wish-10-sensors	OBJECT IDENTIFIER ::= { wish-10 4 }
wish-10-internal	OBJECT IDENTIFIER ::= { wish-10-sensors 1 }
wish-10-external	OBJECT IDENTIFIER ::= { wish-10-sensors 2 }
wish-10-external-1	OBJECT IDENTIFIER ::= { wish-10-external 1 }
wish-10-external-2	OBJECT IDENTIFIER ::= { wish-10-external 2 }
traps	OBJECT IDENTIFIER ::= { roomalert32E 2 }
 
-- Room Alert 32E MIB
-- Parameters 


internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { temperature 1 }

internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { temperature 2 }

internal-humidity OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal relative humidity reading in %RH. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { humidity 1 }

internal-heat-index OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal heat index reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { heat-index 1 }

internal-heat-indexC OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal heat index reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { heat-index 2 }

internal-power OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32E power supply. A '0' indicates the unit is running on AC/Utility power. A '1' indicates the unit is running on battery backup power."
::= { power 1 }

internal-analog1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32E analog input (0-5VDC)."
::= { analog 1 }

internal-analog2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32E analog input (0-5VDC)."
::= { analog 2 }

digital-sen1-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen1 1 }

digital-sen1-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen1 2 }

digital-sen1-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen1 3 }

digital-sen1-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen1 4 }

digital-sen1-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen1 5 }

digital-sen2-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen2 1 }

digital-sen2-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen2 2 }

digital-sen2-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen2 3 }

digital-sen2-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen2 4 }

digital-sen2-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen2 5 }

digital-sen3-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen3 1 }

digital-sen3-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen3 2 }

digital-sen3-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen3 3 }

digital-sen3-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen3 4 }

digital-sen3-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen3 5 }

digital-sen4-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen4 1 }

digital-sen4-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen4 2 }

digital-sen4-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen4 3 }

digital-sen4-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen4 4 }

digital-sen4-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen4 5 }

digital-sen5-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen5 1 }

digital-sen5-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen5 2 }

digital-sen5-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen5 3 }

digital-sen5-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen5 4 }

digital-sen5-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen5 5 }

digital-sen6-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen6 1 }

digital-sen6-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen6 2 }

digital-sen6-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen6 3 }

digital-sen6-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen6 4 }

digital-sen1-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen6 5 }

digital-sen7-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen7 1 }

digital-sen7-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen7 2 }

digital-sen7-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen7 3 }

digital-sen7-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen7 4 }

digital-sen7-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen7 5 }

digital-sen8-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen8 1 }

digital-sen8-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen8 2 }

digital-sen8-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen8 3 }

digital-sen8-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen8 4 }

digital-sen8-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen8 5 }

switch-sen1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED)."
::= { switch 1 }

switch-sen2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED)."
::= { switch 2 }

switch-sen3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED)."
::= { switch 3 }

switch-sen4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED)."
::= { switch 4 }

switch-sen5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED)."
::= { switch 5 }

switch-sen6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED)."
::= { switch 6 }

switch-sen7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED)."
::= { switch 7 }

switch-sen8 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED)."
::= { switch 8 }

switch-sen9 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED)."
::= { switch 9 }

switch-sen10 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED)."
::= { switch 10 }

switch-sen11 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED)."
::= { switch 11 }

switch-sen12 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED)."
::= { switch 12 }

switch-sen13 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED)."
::= { switch 13 }

switch-sen14 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED)."
::= { switch 14 }

switch-sen15 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED)."
::= { switch 15 }

switch-sen16 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED)."
::= { switch 16 }

wish-1-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-1 1 }

wish-1-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-1 2 }

wish-1-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-1 3 }

wish-1-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-1-internal 1 }

wish-1-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-1-internal 2 }

wish-1-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-1-internal 3 }

wish-1-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-1-external-1 1 }

wish-1-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-1-external-1 2 }

wish-1-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-1-external-1 3 }

wish-1-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-1-external-1 4 }

wish-1-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-1-external-1 5 }

wish-1-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-1-external-1 6 }

wish-1-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-1-external-2 1 }

wish-1-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-1-external-2 2 }

wish-1-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-1-external-2 3 }

wish-1-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-1-external-2 4 }

wish-1-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-1-external-2 5 }

wish-1-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-1-external-2 6 }

wish-1-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-1-external 3 }

wish-2-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-2 1 }

wish-2-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-2 2 }

wish-2-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-2 3 }

wish-2-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-2-internal 1 }

wish-2-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-2-internal 2 }

wish-2-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-2-internal 3 }

wish-2-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-2-external-1 1 }

wish-2-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-2-external-1 2 }

wish-2-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-2-external-1 3 }

wish-2-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-2-external-1 4 }

wish-2-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-2-external-1 5 }

wish-2-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-2-external-1 6 }

wish-2-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-2-external-2 1 }

wish-2-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-2-external-2 2 }

wish-2-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-2-external-2 3 }

wish-2-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-2-external-2 4 }

wish-2-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-2-external-2 5 }

wish-2-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-2-external-2 6 }

wish-2-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-2-external 3 }

wish-3-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-3 1 }

wish-3-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-3 2 }

wish-3-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-3 3 }

wish-3-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-3-internal 1 }

wish-3-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-3-internal 2 }

wish-3-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-3-internal 3 }

wish-3-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-3-external-1 1 }

wish-3-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-3-external-1 2 }

wish-3-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-3-external-1 3 }

wish-3-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-3-external-1 4 }

wish-3-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-3-external-1 5 }

wish-3-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-3-external-1 6 }

wish-3-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-3-external-2 1 }

wish-3-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-3-external-2 2 }

wish-3-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-3-external-2 3 }

wish-3-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-3-external-2 4 }

wish-3-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-3-external-2 5 }

wish-3-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-3-external-2 6 }

wish-3-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-3-external 3 }

wish-4-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-4 1 }

wish-4-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-4 2 }

wish-4-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-4 3 }

wish-4-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-4-internal 1 }

wish-4-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-4-internal 2 }

wish-4-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-4-internal 3 }

wish-4-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-4-external-1 1 }

wish-4-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-4-external-1 2 }

wish-4-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-4-external-1 3 }

wish-4-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-4-external-1 4 }

wish-4-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-4-external-1 5 }

wish-4-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-4-external-1 6 }

wish-4-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-4-external-2 1 }

wish-4-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-4-external-2 2 }

wish-4-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-4-external-2 3 }

wish-4-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-4-external-2 4 }

wish-4-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-4-external-2 5 }

wish-4-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-4-external-2 6 }

wish-4-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-4-external 3 }

wish-5-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-5 1 }

wish-5-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-5 2 }

wish-5-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-5 3 }

wish-5-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-5-internal 1 }

wish-5-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-5-internal 2 }

wish-5-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-5-internal 3 }

wish-5-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-5-external-1 1 }

wish-5-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-5-external-1 2 }

wish-5-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-5-external-1 3 }

wish-5-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-5-external-1 4 }

wish-5-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-5-external-1 5 }

wish-5-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-5-external-1 6 }

wish-5-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-5-external-2 1 }

wish-5-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-5-external-2 2 }

wish-5-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-5-external-2 3 }

wish-5-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-5-external-2 4 }

wish-5-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-5-external-2 5 }

wish-5-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-5-external-2 6 }

wish-5-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-5-external 3 }

wish-6-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-6 1 }

wish-6-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-6 2 }

wish-6-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-6 3 }

wish-6-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-6-internal 1 }

wish-6-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-6-internal 2 }

wish-6-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-6-internal 3 }

wish-6-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-6-external-1 1 }

wish-6-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-6-external-1 2 }

wish-6-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-6-external-1 3 }

wish-6-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-6-external-1 4 }

wish-6-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-6-external-1 5 }

wish-6-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-6-external-1 6 }

wish-6-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-6-external-2 1 }

wish-6-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-6-external-2 2 }

wish-6-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-6-external-2 3 }

wish-6-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-6-external-2 4 }

wish-6-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-6-external-2 5 }

wish-6-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-6-external-2 6 }

wish-6-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-6-external 3 }

wish-7-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-7 1 }

wish-7-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-7 2 }

wish-7-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-7 3 }

wish-7-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-7-internal 1 }

wish-7-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-7-internal 2 }

wish-7-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-7-internal 3 }

wish-7-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-7-external-1 1 }

wish-7-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-7-external-1 2 }

wish-7-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-7-external-1 3 }

wish-7-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-7-external-1 4 }

wish-7-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-7-external-1 5 }

wish-7-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-7-external-1 6 }

wish-7-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-7-external-2 1 }

wish-7-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-7-external-2 2 }

wish-7-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-7-external-2 3 }

wish-7-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-7-external-2 4 }

wish-7-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-7-external-2 5 }

wish-7-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-7-external-2 6 }

wish-7-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-7-external 3 }

wish-8-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-8 1 }

wish-8-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-8 2 }

wish-8-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-8 3 }

wish-8-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-8-internal 1 }

wish-8-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-8-internal 2 }

wish-8-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-8-internal 3 }

wish-8-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-8-external-1 1 }

wish-8-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-8-external-1 2 }

wish-8-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-8-external-1 3 }

wish-8-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-8-external-1 4 }

wish-8-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-8-external-1 5 }

wish-8-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-8-external-1 6 }

wish-8-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-8-external-2 1 }

wish-8-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-8-external-2 2 }

wish-8-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-8-external-2 3 }

wish-8-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-8-external-2 4 }

wish-8-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-8-external-2 5 }

wish-8-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-8-external-2 6 }

wish-8-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-8-external 3 }

wish-9-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-9 1 }

wish-9-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-9 2 }

wish-9-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-9 3 }

wish-9-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-9-internal 1 }

wish-9-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-9-internal 2 }

wish-9-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-9-internal 3 }

wish-9-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-9-external-1 1 }

wish-9-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-9-external-1 2 }

wish-9-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-9-external-1 3 }

wish-9-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-9-external-1 4 }

wish-9-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-9-external-1 5 }

wish-9-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-9-external-1 6 }

wish-9-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-9-external-2 1 }

wish-9-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-9-external-2 2 }

wish-9-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-9-external-2 3 }

wish-9-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-9-external-2 4 }

wish-9-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-9-external-2 5 }

wish-9-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-9-external-2 6 }

wish-9-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-9-external 3 }

wish-10-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-10 1 }

wish-10-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-10 2 }

wish-10-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-10 3 }

wish-10-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-10-internal 1 }

wish-10-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-10-internal 2 }

wish-10-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-10-internal 3 }

wish-10-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-10-external-1 1 }

wish-10-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-10-external-1 2 }

wish-10-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-10-external-1 3 }

wish-10-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-10-external-1 4 }

wish-10-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-10-external-1 5 }

wish-10-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-10-external-1 6 }

wish-10-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-10-external-2 1 }

wish-10-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Current reading in Amperage."
::= { wish-10-external-2 2 }

wish-10-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Power reading in Watts."
::= { wish-10-external-2 3 }

wish-10-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Voltage reading in Volts."
::= { wish-10-external-2 4 }

wish-10-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor and connection of a Digital Power Sensor is supported by your model, this value represents the Reference reading in Volts."
::= { wish-10-external-2 5 }

wish-10-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-10-external-2 6 }

wish-10-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-10-external 3 }

alarmmessage OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Last Alarm Message"
::= { traps 1 }	
	
	
-- ROOMALERT32E TRAPS

tempalarm1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempalarm1 trap signifies that the current
			temperature on external sensor 1 is outside the 
			defined high or low threshold."
::= 1
	
room-alert-32E-snmp-trap TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A room-alert-32E-snmp-trap indicates that an alarm
			condition has occurred on the sensor inidcated
			by the alarmMessage variable."
::= 2
	
tempalarm2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempalarm2 trap signifies that the current
			temperature on external sensor 2 is outside the 
			defined high or low threshold."
::= 3
	
tempclear2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempclear2 trap signifies that the current
			temperature on external sensor 2 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 4

tempalarm3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempalarm3 trap signifies that the current
			temperature on external sensor 3 is outside the 
			defined high or low threshold."
::= 5
	
tempclear3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempclear3 trap signifies that the current
			temperature on external sensor 3 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 6
	
humidityalarm1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityalarm1 trap signifies that the current
			humidity on external sensor 1 is outside the 
			defined high or low threshold."
::= 7
	
humidityclear1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityclear1 trap signifies that the current
			humidity on external sensor 1 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 8
	
humidityalarm2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityalarm2 trap signifies that the current
			humidity on external sensor 2 is outside the 
			defined high or low threshold."
::= 9
	
humidityclear2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityclear2 trap signifies that the current
			humidity on external sensor 2 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 10

humidityalarm3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityalarm3 trap signifies that the current
			humidity on external sensor 3 is outside the 
			defined high or low threshold."
::= 11
	
humidityclear3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityclear3 trap signifies that the current
			humidity on external sensor 3 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 12
	
switchalarm1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm1 trap signifies that switch sensor 1
			is in an alarm state."
::= 13
	
switchclear1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear1 trap signifies that the switch sensor 1
			has returned to a normal state."
::= 14
	
switchalarm2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm2 trap signifies that switch sensor 2
			is in an alarm state."
::= 15
	
switchclear2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear2 trap signifies that the switch sensor 2
			has returned to a normal state."
::= 16
	
switchalarm3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm3 trap signifies that switch sensor 3
			is in an alarm state."
::= 17
	
switchclear3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear3 trap signifies that the switch sensor 3
			has returned to a normal state."
::= 18
	
switchalarm4-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm4 trap signifies that switch sensor 4
			is in an alarm state."
::= 19
	
switchclear4-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear4 trap signifies that the switch sensor 4
			has returned to a normal state."
::= 20
	
switchalarm5-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm5 trap signifies that switch sensor 5
			is in an alarm state."
::= 21
	
switchclear5-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear5 trap signifies that the switch sensor 5
			has returned to a normal state."
::= 22
	
switchalarm6-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm6 trap signifies that switch sensor 6
			is in an alarm state."
::= 23
	
switchclear6-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear6 trap signifies that the switch sensor 6
			has returned to a normal state."
::= 24
	
switchalarm7-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm7 trap signifies that switch sensor 7
			is in an alarm state."
::= 25
	
switchclear7-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear7 trap signifies that the switch sensor 7
			has returned to a normal state."
::= 26
	
switchalarm8-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm8 trap signifies that switch sensor 8
			is in an alarm state."
::= 27
	
switchclear8-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear8 trap signifies that the switch sensor 8
			has returned to a normal state."
::= 28
END