All MIBs › RMS-COMPACT-SNMPv1-HUMID1-MIB
Category: Environmental Monitoring
Description: Manages primary humidity sensor readings and thresholds on the RMS Compact environmental monitor.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is RMS-COMPACT-SNMPv1-HUMID1-MIB?
RMS-COMPACT-SNMPv1-HUMID1-MIB is a Sinetica RMS Compact environmental monitoring device MIB dedicated to the unit's primary humidity sensor, covering current humidity readings and associated alarm thresholds. It is a narrowly scoped environmental sensor MIB rather than a general system MIB, exposing only humidity-related data under the device's environment object branch. This falls squarely under hardware status monitoring for facility/rack environmental conditions: it lets an admin track ambient humidity levels and detect out-of-range conditions that could indicate HVAC failure or condensation risk in a server room or comms cabinet. As an SNMPv1 vendor MIB it has no notable dependency beyond basic SNMPv1 SMI conventions. It is deployed in data center or telecom equipment rooms where Sinetica RMS Compact units provide low-cost environmental monitoring alongside temperature and other sensors. Engineers can download the RMS-COMPACT-SNMPv1-HUMID1-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in RMS-COMPACT-SNMPv1-HUMID1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Sinetica RMS Compact environmental monitoring unit
Monitoring Examples
An admin would poll objects under the rms-cHumid1 branch (nested under rms-cEnviroment and rms-cObjects) to read the current humidity percentage and its configured high/low alarm thresholds for the RMS Compact unit's primary humidity sensor. A reading drifting above the configured threshold would signal rising moisture in the equipment room, prompting a check of cooling/dehumidification systems before condensation damages nearby hardware. Because module_desc is empty, the precise leaf object names are inferred from the standard rms-c* naming convention shown in sample_objects.
What Can Be Monitored
- current relative humidity reading
- humidity high/low alarm thresholds
- humidity sensor status
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString | |
| sysDescr | |
| sysName |
OIDs
RFC description
Monitors humidity sensors and generates alarms for RMS Compact environmental monitoring systems.
Start monitoring Sinetica RMS Compact environmental monitoring unit (primary humidity sensor/thresholds) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.