All MIBs › RMS-COMPACT-SNMPv1-CONTACT-MIB
Category: Environmental Monitoring
Description: Manages dry-contact input sensors on the RMS Compact SNMPv1 environmental monitor.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is RMS-COMPACT-SNMPv1-CONTACT-MIB?
RMS-COMPACT-SNMPv1-CONTACT-MIB is a Sinetica vendor MIB for the RMS Compact environmental monitoring appliance, specifically covering its dry-contact digital input sensors. It exposes objects representing the state of each contact input, which are typically wired to external devices like door switches, water leak detectors, smoke alarms, or other binary alarm relays. Its monitoring role is squarely hardware/facility status: reporting open/closed contact states so operators can detect a triggered alarm condition, such as an open door, detected leak, or tripped external sensor, in near real time. As a compact/simplified sibling of Sinetica's broader RMS product MIBs, it likely shares conventions with related RMS environmental MIBs. It is deployed in comms rooms, cabinets, and remote equipment enclosures where simple contact-closure alarms need SNMP visibility. Engineers can download the RMS-COMPACT-SNMPv1-CONTACT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in RMS-COMPACT-SNMPv1-CONTACT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Sinetica RMS Compact environmental monitor (SNMPv1 contact variant)
Monitoring Examples
An administrator would poll the contact objects under the rms-cContact branch to read the current open/closed state of each wired dry-contact input, such as a door switch or water sensor. A contact transitioning from closed to open (or vice versa, depending on wiring) would be interpreted as an alarm event, e.g., a cabinet door being opened or a leak sensor being tripped, prompting an on-site check.
What Can Be Monitored
- dry-contact input state (open/closed)
- per-contact alarm status
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString | |
| sysDescr | |
| sysName |
OIDs
RFC description
Contact input alarm notifications for Sinetica RMS Compact monitoring system.
Start monitoring Sinetica RMS Compact environmental monitor, SNMPv1 contact variant (dry-contact alarm inputs) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.