RC-TEImportPolicy-MIB

All MIBs › RC-TEImportPolicy-MIB

Last Updated: 2012-12-11

Category: MPLS and Traffic Engineering, Nortel Enterprise Data

Description: Manages traffic engineering import policy configuration for MPLS-TE path computation on Nortel network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RC-TEImportPolicy-MIB?

RC-TEImportPolicy-MIB is a proprietary MIB (built on RC-SMI) implementing route-map-based Policy-Based Routing with Traffic Engineering (TE) tunnel targets. Its route-map table, keyed by name/index/instance, records a match-ACL reference and a set-interface-tunnel-ID action; a policy-route table binds an interface to a referenced route map; and an ACL table (IPv4 rule ID, source/destination address and wildcard, protocol, source/destination port range) supplies the match criteria. As a configuration MIB it lets an administrator confirm which traffic is policy-routed into a specific TE tunnel on this device. It is deployed on networking equipment implementing this RC-SMI-based policy-routing/TE-tunnel feature. Engineers can download the RC-TEImportPolicy-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RC-TEImportPolicy-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Networking equipment implementing this RC-SMI-based policy-routing/TE-tunnel feature

Monitoring Examples

An administrator checks rcRouteMapSetIntfTunnelID and rcIPv4ACLSrcAddr to confirm which traffic is policy-routed into a specific TE tunnel on this device.

What Can Be Monitored

policy-based routing and TE-tunnel target configuration

Imported Objects

From RC-SMI

rc	MODULE-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
rcTEImportPolicy	1.3.6.1.4.1.65000.2
rcRouteMapTable	1.3.6.1.4.1.65000.2.1		not-accessible
rcRouteMapEntry	1.3.6.1.4.1.65000.2.1.1		not-accessible
STR rcRouteMapname	1.3.6.1.4.1.65000.2.1.1.1	DisplayString	not-accessible	RouteMap name
U32 rcRouteMapIndex	1.3.6.1.4.1.65000.2.1.1.2	Unsigned32	not-accessible	The index of RouteMap
U32 rcRouteMapIntanceIndex	1.3.6.1.4.1.65000.2.1.1.3	Unsigned32	not-accessible
STR rcRouteMapMatchAcl	1.3.6.1.4.1.65000.2.1.1.4	DisplayString	read-create	ACL name
U32 rcRouteMapSetIntfTunnelID	1.3.6.1.4.1.65000.2.1.1.5	Unsigned32	read-create	TE Tunnel ID
ROW rcRouteMapRowSta	1.3.6.1.4.1.65000.2.1.1.6	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcPolicyRouteTable	1.3.6.1.4.1.65000.2.2		not-accessible	ROUTE_MAP
rcPolicyRouteEntry	1.3.6.1.4.1.65000.2.2.1		not-accessible	IP POLICY
STR rcInterfacename	1.3.6.1.4.1.65000.2.2.1.1	DisplayString	not-accessible	The name of Interface
STR rcRefRouteMapname	1.3.6.1.4.1.65000.2.2.1.2	DisplayString	not-accessible	The name of RouteMap
U32 rcRefRouteMapIndex	1.3.6.1.4.1.65000.2.2.1.3	Unsigned32	not-accessible	The index of RouteMap
ROW rcPolicyRouteRowSta	1.3.6.1.4.1.65000.2.2.1.4	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcACLTable	1.3.6.1.4.1.65000.2.3		not-accessible
rcACLEntry	1.3.6.1.4.1.65000.2.3.1		not-accessible
STR rcIPv4ACLName	1.3.6.1.4.1.65000.2.3.1.1	DisplayString	not-accessible	WORD Name of an IPv4 access-list
U32 rcIPv4ACLRuleID	1.3.6.1.4.1.65000.2.3.1.2	Unsigned32	not-accessible
IP rcIPv4ACLSrcAddr	1.3.6.1.4.1.65000.2.3.1.3	IpAddress	read-create	A.B.C.D Source address
IP rcIPv4ACLSrcWildcard	1.3.6.1.4.1.65000.2.3.1.4	IpAddress	read-create	The mask of the source IP address
IP rcIPv4ACLDestAddr	1.3.6.1.4.1.65000.2.3.1.5	IpAddress	read-create	Destination IP address
IP rcIPv4ACLDestWildcard	1.3.6.1.4.1.65000.2.3.1.6	IpAddress	read-create	The mask of the source IP address
U32 rcIPv4ACLProtocol	1.3.6.1.4.1.65000.2.3.1.7	Unsigned32	read-create	IP protocol
U32 rcIPv4ACLSrcPortBegin	1.3.6.1.4.1.65000.2.3.1.8	Unsigned32	read-create	The begin of the source port range
U32 rcIPv4ACLSrcPortEnd	1.3.6.1.4.1.65000.2.3.1.9	Unsigned32	read-create	The end of the source port range
U32 rcIPv4ACLDestPortBegin	1.3.6.1.4.1.65000.2.3.1.10	Unsigned32	read-create	The begin of the destination port range
U32 rcIPv4ACLDestPortEnd	1.3.6.1.4.1.65000.2.3.1.11	Unsigned32	read-create	The end of the destination port range
U32 rcIPv4ACLDSCP	1.3.6.1.4.1.65000.2.3.1.12	Unsigned32	read-create	DSCP value
ROW rcIPV4ACLRowsta	1.3.6.1.4.1.65000.2.3.1.13	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.

RFC description

Manages Routing Control traffic engineering import policies and path selection constraints on carrier-grade routing platforms.

Start monitoring networking equipment implementing RC-SMI-based policy routing/TE tunnel targeting (route-map/ACL policy config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RC-TEImportPolicy-MIB

What Is RC-TEImportPolicy-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description