RC-MPLS-TE-MIB

All MIBs › RC-MPLS-TE-MIB

Last Updated: 2015-02-13

Category: MPLS and Traffic Engineering, Nortel Enterprise Data

Description: Manages MPLS Traffic Engineering tunnel configuration and RSVP-TE path parameters on Nortel Ethernet Routing Switch platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RC-MPLS-TE-MIB?

RC-MPLS-TE-MIB is a Nortel-associated MIB intended to manage MPLS Traffic Engineering tunnels, covering RSVP-TE signaled path configuration and tunnel parameters on Nortel Ethernet Routing Switch platforms. Conceptually it exposes configuration and operational-status data for TE tunnels, such as tunnel setup/hold priorities, explicit routes, and tunnel operational state. In an MPLS-TE context this kind of MIB is used for fault monitoring of the label-switched network, tracking tunnel operational status to detect path failures or reroutes. It almost certainly parallels the structure of the IETF MPLS-TE-MIB/MPLS-TE-STD-MIB given its naming and stated purpose, indicating a strong standards-lineage dependency. It would be deployed on Nortel/Avaya Ethernet Routing Switch or other MPLS-TE capable routing platforms, where RC-MPLS-TE-MIB SNMP monitoring tracks tunnel state on traffic-engineered LSPs.

IPNetwork Monitor allows you to monitor SNMP objects defined in RC-MPLS-TE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel/Avaya Ethernet Routing Switch
MPLS-TE capable router

Monitoring Examples

No real object or table names were available for this module (the only entry present was the "IMPORTS" clause, not an actual manageable object), and no module description text was supplied either, so a concrete polling scenario with specific OIDs can't be honestly grounded here beyond the general MPLS-TE tunnel-monitoring purpose implied by the module's name.

What Can Be Monitored

MPLS-TE tunnel configuration
RSVP-TE signaled path parameters
tunnel operational status

Imported Objects

From RC-SMI

rc	MODULE-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
rcMplsTeMIB	1.3.6.1.4.1.65000.1
rcMplsTeNotifications	1.3.6.1.4.1.65000.1.0
NTF rcMplsLspUp	1.3.6.1.4.1.65000.1.0.1			This notification is generated when a MplsTunnelOperStatus object for one of the LSPs is about to leave the down state and transition into up state.
NTF rcMplsLspDown	1.3.6.1.4.1.65000.1.0.2			This notification is generated when a MplsTunnelOperStatus object for one of the LSPs is about to leave the up state and transition into down state.
rcMplsTETunnelCfgTable	1.3.6.1.4.1.65000.1.1		not-accessible
rcMplsTETunnelCfgEntry	1.3.6.1.4.1.65000.1.1.1		not-accessible	An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling protocol. Whenever a new entry is created with mplsTETunnelIsIf set to true(1), then a corresponding entry is created in ifTable as well (see RFC 2863). The ifType of this entry is mplsTETunnel(150).A tunnel entry needs to be uniquely identified across a MPLS network. Indices mplsTETunnelIndex and mplsTETunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. To uniquely identify a tunnel across an MPLS network requires index mplsTETunnelIngressLSRId. The last index mplsTETunnelEgressLSRId is useful in identifying all instances of a tunnel that terminate on the same egress LSR.
U32 rcMplsTETunnelCfgTunnelID	1.3.6.1.4.1.65000.1.1.1.1	Unsigned32	not-accessible	Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTETunnelIndexNext. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object.
IP rcMplsTETunnelCfgEgressLSRId	1.3.6.1.4.1.65000.1.1.1.2	IpAddress	read-create	Identity of the egress LSR associated with this tunnel instance.
I32 rcMplsTETunnelCfgSetupPrio	1.3.6.1.4.1.65000.1.1.1.3	Integer32	read-create	Indicates the setup priority of this tunnel.
I32 rcMplsTETunnelCfgHoldingPrio	1.3.6.1.4.1.65000.1.1.1.4	Integer32	read-create	Indicates the holding priority for this tunnel.
INT rcMplsTETunnelCfgRecordRoute	1.3.6.1.4.1.65000.1.1.1.5	INTEGER	read-create	If this object is true, then it enables the RecordRoute.
U32 rcMplsTETunnelCfgBandwidth	1.3.6.1.4.1.65000.1.1.1.6	Unsigned32	read-create	The bandwidth of this tunnel.
STR rcMplsTETunnelCfgExplicitPathName	1.3.6.1.4.1.65000.1.1.1.7	DisplayString	read-create	The explicit path name of the tunnel master lsp used.
U32 rcMplsTETunnelCfgExplicitPathID	1.3.6.1.4.1.65000.1.1.1.8	Unsigned32	read-create	The explicit path id of the tunnel master lsp used.
INT rcMplsTETunnelCfgHSB	1.3.6.1.4.1.65000.1.1.1.9	INTEGER	read-create	If this object is true, then it enables the hot standby.
STR rcMplsTETunnelCfgHSBExplicitPathName	1.3.6.1.4.1.65000.1.1.1.10	DisplayString	read-create	The explicit path name of the tunnel hot standby lsp used.
U32 rcMplsTETunnelCfgHSBExplicitPathID	1.3.6.1.4.1.65000.1.1.1.11	Unsigned32	read-create	The explicit path id of the tunnel hot standby lsp used.
ROW rcMplsTETunnelCfgRowSta	1.3.6.1.4.1.65000.1.1.1.12	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcMplsTEPathOptCfgTable	1.3.6.1.4.1.65000.1.2		not-accessible
rcMplsTEPathOptCfgEntry	1.3.6.1.4.1.65000.1.2.1		not-accessible
U32 rcMplsTEPathOptCfgTunnelID	1.3.6.1.4.1.65000.1.2.1.1	Unsigned32	not-accessible	The index of path option which equals to tunnel id.
U32 rcMplsTEPathOptCfgNumber	1.3.6.1.4.1.65000.1.2.1.2	Unsigned32	not-accessible	Secondary index whitch identifies the configure value of path option .
INT rcMplsTEPathOptCfgPathType	1.3.6.1.4.1.65000.1.2.1.3	INTEGER	read-create	If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If this value is explicitId or explicitName, the user specify the entire path for the tunnel . This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
STR rcMplsTEPathOptCfgExpPathName	1.3.6.1.4.1.65000.1.2.1.4	DisplayString	read-create	The name of Path Option.If the type of Path Option is dynamic,then this value is '1'; if the type is explicitId or explicitName,then this value is a number or a string.
U32 rcMplsTEPathOptCfgExpPathID	1.3.6.1.4.1.65000.1.2.1.5	Unsigned32	read-create	The name of Path Option.If the type of Path Option is dynamic,then this value is '1'; if the type is explicitId or explicitName,then this value is a number or a string.
ROW rcMplsTEPathOptCfgRowSta	1.3.6.1.4.1.65000.1.2.1.6	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcMplsTEExplicitPathNameCfgTable	1.3.6.1.4.1.65000.1.3		not-accessible	Explicit-path table is user configured,the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
rcMplsTEExplicitPathNameCfgEntry	1.3.6.1.4.1.65000.1.3.1		not-accessible	Explicit-path table entry.
STR rcMplsTEExplicitPathNameCfgName	1.3.6.1.4.1.65000.1.3.1.1	DisplayString	not-accessible	The index of Explicit-path table.The explicit name is a string.
ROW rcMplsTEExplicitPathNameCfgRowSta	1.3.6.1.4.1.65000.1.3.1.2	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcMplsTEExplicitPathIDCfgTable	1.3.6.1.4.1.65000.1.4		not-accessible	Explicit-path table is user configured,the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
rcMplsTEExplicitPathIDCfgEntry	1.3.6.1.4.1.65000.1.4.1		not-accessible	Explicit-path table entry.
U32 rcMplsTEExplicitPathIDCfgIdentifer	1.3.6.1.4.1.65000.1.4.1.1	Unsigned32	not-accessible	The index of Explicit-path table.The explicitId is a number.
ROW rcMplsTEExplicitPathIDCfgRowSta	1.3.6.1.4.1.65000.1.4.1.2	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcMplsTEExplicitRouteNameCfgTable	1.3.6.1.4.1.65000.1.5		not-accessible
rcMplsTEExplicitRouteNameCfgEntry	1.3.6.1.4.1.65000.1.5.1		not-accessible
STR rcMplsTEExplicitRouteNameCfgName	1.3.6.1.4.1.65000.1.5.1.1	DisplayString	not-accessible	The primary index of Explicit-path route table.The explicit name is a string.
U32 rcMplsTEExplicitRouteNameCfgIndex	1.3.6.1.4.1.65000.1.5.1.2	Unsigned32	not-accessible	Secondary index of Explicit-path route table.IP addr index.
IP rcMplsTEExplicitRouteNameCfgNextIP	1.3.6.1.4.1.65000.1.5.1.3	IpAddress	read-create	Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,......
INT rcMplsTEExplicitRouteNameCfgHopType	1.3.6.1.4.1.65000.1.5.1.4	INTEGER	read-create	The hop type.
INT rcMplsTEExplicitRouteNameCfgHopAttribute	1.3.6.1.4.1.65000.1.5.1.5	INTEGER	read-create	The hop router attribute.
ROW rcMplsTEExplicitRouteNameCfgRowSta	1.3.6.1.4.1.65000.1.5.1.6	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcMplsTEExplicitRouteIDCfgTable	1.3.6.1.4.1.65000.1.6		not-accessible
rcMplsTEExplicitRouteIDCfgEntry	1.3.6.1.4.1.65000.1.6.1		not-accessible
U32 rcMplsTEExplicitRouteIDCfgIdentifer	1.3.6.1.4.1.65000.1.6.1.1	Unsigned32	not-accessible	The primary index of Explicit-path route table.The explicitId is a number.
U32 rcMplsTEExplicitRouteIDCfgIndex	1.3.6.1.4.1.65000.1.6.1.2	Unsigned32	not-accessible	Secondary index of Explicit-path route table.IP addr index.
IP rcMplsTEExplicitRouteIDCfgNextIP	1.3.6.1.4.1.65000.1.6.1.3	IpAddress	read-create	Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,......
INT rcMplsTEExplicitRouteIDCfgHopType	1.3.6.1.4.1.65000.1.6.1.4	INTEGER	read-create	The hop type.
INT rcMplsTEExplicitRouteIDCfgHopAttribute	1.3.6.1.4.1.65000.1.6.1.5	INTEGER	read-create	The hop router attribute.
ROW rcMplsTEExplicitRouteIDCfgRowSta	1.3.6.1.4.1.65000.1.6.1.6	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcMplsTEHotStandbyCfgTable	1.3.6.1.4.1.65000.1.7		not-accessible
rcMplsTEHotStandbyCfgEntry	1.3.6.1.4.1.65000.1.7.1		not-accessible
U32 rcMplsTEHotStandbyCfgTunnelID	1.3.6.1.4.1.65000.1.7.1.1	Unsigned32	not-accessible	The primary index of path option which equals to tunnel id.
U32 rcMplsTEHotStandbyCfgProtOptNo	1.3.6.1.4.1.65000.1.7.1.2	Unsigned32	not-accessible	The secondary index which identifies the configure value of protected path option.Its value always is 1.
INT rcMplsTEHotStandbyCfgPathType	1.3.6.1.4.1.65000.1.7.1.3	INTEGER	read-create	If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If this value is explicitId or explicitName, the user specify the entire path for the tunnel . This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
STR rcMplsTEHotStandbyCfgExpPathName	1.3.6.1.4.1.65000.1.7.1.4	DisplayString	read-create	The name of explicit path for protecting the master path.
U32 rcMplsTEHotStandbyCfgExpPathID	1.3.6.1.4.1.65000.1.7.1.5	Unsigned32	read-create	The ID of explicit path for protecting the master path.
ROW rcMplsTEHotStandbyCfgRowSta	1.3.6.1.4.1.65000.1.7.1.6	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
rcMplsTETunnelGroupCfgTable	1.3.6.1.4.1.65000.1.8		not-accessible
rcMplsTETunnelGroupCfgEntry	1.3.6.1.4.1.65000.1.8.1		not-accessible
U32 rcMplsTETunnelGroupCfgPrimaryTunnelID	1.3.6.1.4.1.65000.1.8.1.1	Unsigned32	not-accessible	The index of tunnel group table which equals to primary tunnel id.
U32 rcMplsTETunnelGroupCfgSecondaryTunnelID	1.3.6.1.4.1.65000.1.8.1.2	Unsigned32	read-create	The secondary tunnel ID.
ROW rcMplsTETunnelGroupCfgRowSta	1.3.6.1.4.1.65000.1.8.1.3	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.

RFC description

Manages MPLS Traffic Engineering tunnels, LSP status, and tunnel configuration for label switched path operations.

Start monitoring Nortel/Avaya Ethernet Routing Switch, MPLS-TE capable router (RSVP-TE tunnel configuration/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RC-MPLS-TE-MIB

What Is RC-MPLS-TE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description