| OID symbolic | OID numeric | Type | Access | Description |
|---|
| rbnConfigFileMib | 1.3.6.1.4.1.2352.2.13 | | | Defines the objects necessary to support loading Redback
system configuration files and saving the contents of the
current system configuration.
For security reasons, all mib objects defined in this module
are only accessible via SNMP community strings (v1/v2c) or
SNMP contextNames (v3) that map to the system's 'local'
context.
Note well: due to these security reasons, it is highly
encouraged to only allow access to this MIB via the more
secure protocols supported by SNMPv3. |
| rbnConfigFileMIBNotifications | 1.3.6.1.4.1.2352.2.13.0 | | | |
| NTF rcfJobCompleted | 1.3.6.1.4.1.2352.2.13.0.1 | | | A notification indicating that a configuration job has
completed. |
| rbnConfigFileMIBObjects | 1.3.6.1.4.1.2352.2.13.1 | | | |
| rcfJobs | 1.3.6.1.4.1.2352.2.13.1.1 | | | |
| TES rcfJobSpinLock | 1.3.6.1.4.1.2352.2.13.1.1.1 | TestAndIncr | read-write | An advisory lock used to allow several cooperating Command
Generator Applications to coordinate their use of facilities
to create/modify entries in the rcfJobTable. |
| U32 rcfJobNextIndex | 1.3.6.1.4.1.2352.2.13.1.1.2 | Unsigned32 | read-only | The next available index which can be used to create a rcfJobEntry. |
| rcfJobTable | 1.3.6.1.4.1.2352.2.13.1.1.3 | | not-accessible | A table which is used to start and monitor a process which
loads a configuration file, or saves the current configuration
out to a file.
The suggested method to create a new entry is:
1. GET(rcfJobSpinLock.0,
rcfJobNextIndex.0) and save in
slValue, niValue respectively
2. SET(rcfJobSpinLock.0 = slValue,
rcfJobXxx.niValue = ...
rcfJobYyy.niValue = ...
...
rcfJobRowStatus.niValue = 'createAndGo')
Entries whose state is 'completed' may be automatically
deleted by the system after some system dependant time. |
| rcfJobEntry | 1.3.6.1.4.1.2352.2.13.1.1.3.1 | | not-accessible | An entry created by a Command Generator application which starts
and monitors a process which loads a system configuration file or
saves the current system configuration out to a file.
When rcfJobRowStatus becomes active, rcfJobState is set to
'pending' and is queued for processing. Only one job may be
processed at a time.
When the job reaches the head of the queue, rcfJobState is set
to 'inProgress' and the configuration operation will be performed.
When the operation completes, rcfJobState will be set to
'completed'. Also at this time the objects rcfJobResult and
rcfJobErrorMsgs will be instantiated and will provide the
success/failure status of the operation.
A job in the 'pending' state may be aborted by setting
rcfJobRowStatus to 'notInService' or 'destroy'.
An entry for a job which has completed (rcfJobState is
'completed') may be reset to the 'pending' state
by setting rcfRowStatus to 'notInService' and then back to
'active' to initiate another configuration operation.
Note: while rcfRowStatus equals 'active', the only object
instance that can be modified in the entry is rcfRowStatus. To
alter any other object instance, rcfRowStatus must be set to
'notInService'. |
| U32 rcfJobIndex | 1.3.6.1.4.1.2352.2.13.1.1.3.1.1 | Unsigned32 | not-accessible | A unique identifier for an entry in this table. |
| INT rcfJobOp | 1.3.6.1.4.1.2352.2.13.1.1.3.1.2 | INTEGER | read-create | The configuration operation to perform.
If 'load', the file specified in rcfJobFilename is retrieved,
parsed and loaded into the system configuration.
If 'save', the current system configuration is written to the
file specified in rcfJobFilename. |
| INT rcfJobProtocol | 1.3.6.1.4.1.2352.2.13.1.1.3.1.3 | INTEGER | read-create | The file transfer protocol to use.
If 'local', the filename specified in rcfJobFilename exists
locally on the Redback system (eg in /flash).
If 'tftp', the filename specified in rcfJobFilename will be
read/written from/to the system identified by rcfJobIpAddress
via the TFTP file transfer protocol.
If 'ftp', the filename specified in rcfJobFilename will be
read/written from/to the system identified by rcfJobIpAddress
via the FTP file transfer protocol. The values in
rcfJobUsername and rcfJobPassword will be used for
authentication. rcfJobPassiveMode can be used to
enable/disable FTP's passive mode. |
| STR rcfJobFilename | 1.3.6.1.4.1.2352.2.13.1.1.3.1.4 | SnmpAdminString | read-create | The name of the source file (loads) or destination file (saves). |
| IPt rcfJobIpAddressType | 1.3.6.1.4.1.2352.2.13.1.1.3.1.5 | InetAddressType | read-create | The address type for rcfJobIpAddress.
This object is only relevant for non-local filenames. If
rcfJobProtocol equals 'local', any value for this object
will effectively be ignored. |
| IP rcfJobIpAddress | 1.3.6.1.4.1.2352.2.13.1.1.3.1.6 | InetAddress | read-create | The IP address for the file server which contains the source
file (loads) or destination file (saves).
This object is only relevant for non-local filenames. If
rcfJobProtocol equals 'local', any value for this object will
effectively be ignored. |
| STR rcfJobUsername | 1.3.6.1.4.1.2352.2.13.1.1.3.1.7 | SnmpAdminString | read-create | The username to use for authentication with the file server.
This object is only relevant for the FTP protocol. If
rcfJobProtocol does not equal 'ftp', any value for this
object will effectively be ignored.
For security reasons, all SNMP gets on this object will
return a zero-length string. |
| STR rcfJobPassword | 1.3.6.1.4.1.2352.2.13.1.1.3.1.8 | SnmpAdminString | read-create | The password to use for authentication with the file server.
A zero-length string value would be used for usernames that
do not require a password.
This object is only relevant for the FTP protocol. If
rcfJobProtocol does not equal 'ftp', any value for this
object will effectively be ignored.
For security reasons, all SNMP gets on this object will
return a zero-length string. |
| T/F rcfJobPassiveMode | 1.3.6.1.4.1.2352.2.13.1.1.3.1.9 | TruthValue | read-create | Enables/disables passive mode on FTP connections.
This object is only relevant for the FTP protocol. If
rcfJobProtocol does not equal 'ftp', any value for this
object will effectively be ignored. |
| U32 rcfJobStopAtLine | 1.3.6.1.4.1.2352.2.13.1.1.3.1.10 | Unsigned32 | read-create | If this object instance has a non-zero value, parsing and
loading of the configuration file will terminate after the
specified line number.
This object is only relevant for 'load' operations. If
rcfJobOp does not equal 'load', any value for this object will
effectively be ignored. |
| T/F rcfJobSaveDefaults | 1.3.6.1.4.1.2352.2.13.1.1.3.1.11 | TruthValue | read-create | If 'true', default values for all configuration values are
saved. If 'false', only the values which have been explicitly
configured are saved.
This object is only relevant for 'save' operations. If
rcfJobOp does not equal 'save', any value for this object will
effectively be ignored. |
| INT rcfJobState | 1.3.6.1.4.1.2352.2.13.1.1.3.1.12 | INTEGER | read-only | The current state of the configuration job.
pending -- The initial state of all jobs. Jobs are queued
and processed in order of creation.
inProgress -- The job is actively being performed.
completed -- The job has completed. |
| INT rcfJobResult | 1.3.6.1.4.1.2352.2.13.1.1.3.1.13 | INTEGER | read-only | A generic result code. This object is instantiated only when
rcfJobStatus equals 'completed'.
success -- The job completed successfully.
other -- An error that doesn't fall into one of the categories
below.
noMemory -- Insufficient system resources to perform the
operation.
parse -- A parse failure occurred. ie- there was a syntax
error in the source configuration file.
io -- An i/o error occurred.
access -- A file access error occurred. This could be caused
by a non-existant source file, or insufficient
access/permission to create/modify the destination
file.
More detailed error descriptions can be found in the
rcfJobErrorMsgs object. |
| STR rcfJobErrorMsgs | 1.3.6.1.4.1.2352.2.13.1.1.3.1.14 | SnmpAdminString | read-only | Detailed error messages generated during the configuration
operation. This object is instantiated only when rcfJobState
equals 'completed'.
Note: the amount of error messages produced by a configuration
operation may exceed the max size of this object (255 bytes).
If this happens, the last character in the rcfJobErrorMsgs
value will be '$' to indicate that a truncation occurred.
Note: there may be some types of messages that one will see
when performing a configuration operation via the CLI. However
these messages will not be seen in the values for this object.
A specific example on the SMS platform is the messages the
CLI will display when there is a parse failure. These messages
will not be captured in this object. |
| TIM rcfJobCreateTime | 1.3.6.1.4.1.2352.2.13.1.1.3.1.15 | TimeStamp | read-only | The value of sysUpTime when this job entry was created. |
| TIM rcfJobStartTime | 1.3.6.1.4.1.2352.2.13.1.1.3.1.16 | TimeStamp | read-only | The value of sysUpTime when rcfJobState moved from 'pending' to
'inProgress'.
This object will not be instantiated until rcfJobState moves to
'inProgress'. The object will be un-instantiated if
rcfJobRowStatus is set to 'notInService'. |
| TIM rcfJobStopTime | 1.3.6.1.4.1.2352.2.13.1.1.3.1.17 | TimeStamp | read-only | The value of sysUpTime when the job completed.
This object will not be instantiated until rcfJobState moves to
'completed'. The object will be un-instantiated if
rcfJobRowStatus is set to 'notInService'. |
| T/F rcfJobNotifyOnCompletion | 1.3.6.1.4.1.2352.2.13.1.1.3.1.18 | TruthValue | read-create | If 'true', an rcfJobCompleted notification will be generated
when the job completes. |
| STR rcfJobOwner | 1.3.6.1.4.1.2352.2.13.1.1.3.1.19 | OwnerString | read-create | This object can be used to identify who/what/where created this
job entry. |
| ROW rcfJobRowStatus | 1.3.6.1.4.1.2352.2.13.1.1.3.1.20 | RowStatus | read-create | The row status for creating, modifying, or deleting an entry
in the table.
Note that 'active' entries cannot be modified.
Any attempt to modify an object in this entry while
rcfJobRowStatus equals 'active' will result in an
inconsistentValue error.
To modify objects in an active entry, rcfJobRowStatus must
first be set to 'notInService'.
All entries will be automatically deleted by the agent after
some system dependent time. |
| rbnConfigFileMIBConformance | 1.3.6.1.4.1.2352.2.13.2 | | | |
| rbnConfigFileCompliances | 1.3.6.1.4.1.2352.2.13.2.1 | | | |
| rbnConfigFileCompliance | 1.3.6.1.4.1.2352.2.13.2.1.1 | | | The compliance statement for SNMP entities which implement
the Redback Configuration File MIB. |
| rbnConfigFileGroups | 1.3.6.1.4.1.2352.2.13.2.2 | | | |
| rcfJobGroup | 1.3.6.1.4.1.2352.2.13.2.2.1 | | | The collection of objects which represent a configuration job. |
| rcfJobNotifyGroup | 1.3.6.1.4.1.2352.2.13.2.2.2 | | | The collection of notifications related to configuration jobs. |
