All MIBs › RAPID-CITY › rcPortIngressRateLimitState
rcPortIngressRateLimitState
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcPortIngressRateLimitState
OID (numeric): 1.3.6.1.4.1.2272.1.4.10.1.1.86
Node type: OBJECT-TYPE
Type: EnableValue
Access: read-write
Description:
Used to enable/disable police/ingress-rate-limit functionality.
What is rcPortIngressRateLimitState?
This OID enables or disables traffic rate limiting on incoming data at a port. When enabled, it drops packets exceeding a set rate to prevent congestion. You'd toggle this when implementing quality-of-service policies to protect your network from overload.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.4.10.1.1.86 snmpwalk -v2c -c public <target> RAPID-CITY::rcPortIngressRateLimitState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.4.10.1.1.86.1 snmpget -v2c -c public <target> RAPID-CITY::rcPortIngressRateLimitState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.4.10.1.1.86.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.4 | rcChassis | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.4.10 | rcPort | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.4.10.1 | rcPortTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.4.10.1.1 | rcPortEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.4.10.1.1.86 | rcPortIngressRateLimitState | RAPID-CITY |