All MIBs › RAPID-CITY › rcIpUdpConfBroadcastIntfMaxTtl
rcIpUdpConfBroadcastIntfMaxTtl
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpUdpConfBroadcastIntfMaxTtl
OID (numeric): 1.3.6.1.4.1.2272.1.8.13.8.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Used to indicate the maximum number of hops an IP broadcast packet can take from the source device to the destination device.
What is rcIpUdpConfBroadcastIntfMaxTtl?
This configurable value sets the maximum hop count (TTL) allowed for UDP broadcast packets forwarded across an IP interface. The setting prevents broadcast packets from traveling too far across networks, limiting scope and reducing unnecessary traffic. Network administrators configure this parameter to control the reach of UDP broadcasts and prevent them from flooding distant network segments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.13.8.1.3 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpUdpConfBroadcastIntfMaxTtl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.13.8.1.3.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpUdpConfBroadcastIntfMaxTtl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.13.8.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.13 | rcIpUdp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.13.8 | rcIpUdpConfBroadcastIntfTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.13.8.1 | rcIpUdpConfBroadcastIntfEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.13.8.1.3 | rcIpUdpConfBroadcastIntfMaxTtl | RAPID-CITY |