All MIBs › RAPID-CITY › rcIpRsmltOperHoldUpTimer
rcIpRsmltOperHoldUpTimer
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpRsmltOperHoldUpTimer
OID (numeric): 1.3.6.1.4.1.2272.1.8.26.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The range of value 0 to 3600 or 9999. 9999 means infinity.
What is rcIpRsmltOperHoldUpTimer?
This object specifies the hold-up timer duration (in seconds) for IP routing state maintenance, with valid values from 0 to 3600 seconds or 9999 for infinity. The timer determines how long route state information is retained after a failure is detected before convergence begins. Network operators adjust this value to control the delay between failure detection and routing protocol reconvergence.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.26.2.1.5 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpRsmltOperHoldUpTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.26.2.1.5.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpRsmltOperHoldUpTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.26.2.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.26 | rcIpRsmlt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.26.2 | rcIpRsmltOperTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.26.2.1 | rcIpRsmltOperEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.26.2.1.5 | rcIpRsmltOperHoldUpTimer | RAPID-CITY |