All MIBs › RAPID-CITY › rcIpRipInterfaceRipEnable
rcIpRipInterfaceRipEnable
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpRipInterfaceRipEnable
OID (numeric): 1.3.6.1.4.1.2272.1.8.20.1.1.3
Node type: OBJECT-TYPE
Type: EnableValue
Access: read-write
What is rcIpRipInterfaceRipEnable?
This is an enable/disable flag that turns on RIP (Routing Information Protocol) routing on a specific network interface. When enabled, the interface will send and receive RIP routing updates. A network engineer would enable this on interfaces that need to participate in dynamic routing within a layer-3 switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.20.1.1.3 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpRipInterfaceRipEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.20.1.1.3.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpRipInterfaceRipEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.20.1.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.20 | rcIpRipInterface | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.20.1 | rcIpRipInterfaceTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.20.1.1 | rcIpRipInterfaceEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.20.1.1.3 | rcIpRipInterfaceRipEnable | RAPID-CITY |