All MIBs › RAPID-CITY › rcIpConfV2AdvertiseWhenDown
rcIpConfV2AdvertiseWhenDown
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpConfV2AdvertiseWhenDown
OID (numeric): 1.3.6.1.4.1.2272.1.8.1.8.1.13
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state.
What is rcIpConfV2AdvertiseWhenDown?
This object determines whether the Accelar switch will notify the routing layer (Layer 3) when a VLAN state changes, for routable VLANs or single routable ports. When enabled, state changes are advertised immediately; when disabled, routing remains unaware of link status transitions. Operators configure this to control fast-reroute behavior and convergence speed during link failures.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.8.1.13 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpConfV2AdvertiseWhenDown
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.8.1.13.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpConfV2AdvertiseWhenDown.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.1.8.1.13.1 s <value>
Start monitoring Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAPID-CITY::rcIpConfV2AdvertiseWhenDown OID value, configure state conditions and alerts, and monitor any Bay Networks/Nortel Accelar and Ethernet Routing Switch (ERS) chassis switches from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1 | rcIpConf | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8 | rcIpConfV2Table | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8.1 | rcIpConfV2Entry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8.1.13 | rcIpConfV2AdvertiseWhenDown | RAPID-CITY |