All MIBs › RAPID-CITY › rcIpConfV2AdvertDefRte
rcIpConfV2AdvertDefRte
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpConfV2AdvertDefRte
OID (numeric): 1.3.6.1.4.1.2272.1.8.1.8.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
Used to indicate whether this interface should advertize a RIP default route.
What is rcIpConfV2AdvertDefRte?
This object enables or disables whether a particular network interface should advertise a RIP (Routing Information Protocol) default route to neighboring routers. When enabled, the interface sends RIP advertisements indicating that it can route traffic to any unknown destination via a default gateway. Operators configure this on interfaces that connect to ISPs or default gateways to propagate routing information across the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.8.1.4 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpConfV2AdvertDefRte
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.8.1.4.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpConfV2AdvertDefRte.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.1.8.1.4.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1 | rcIpConf | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8 | rcIpConfV2Table | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8.1 | rcIpConfV2Entry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8.1.4 | rcIpConfV2AdvertDefRte | RAPID-CITY |