All MIBs › RAPID-CITY › rcIpConfV2AcceptDefRte
rcIpConfV2AcceptDefRte
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpConfV2AcceptDefRte
OID (numeric): 1.3.6.1.4.1.2272.1.8.1.8.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
Used to indicate whether this interface should accept a RIP default route.
What is rcIpConfV2AcceptDefRte?
This OID controls whether a network interface accepts default route information from RIP (an older routing protocol). A default route tells devices where to send traffic with no known destination. An administrator enables or disables this to control which routing information this interface trusts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.8.1.5 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpConfV2AcceptDefRte
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.8.1.5.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpConfV2AcceptDefRte.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.1.8.1.5.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1 | rcIpConf | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8 | rcIpConfV2Table | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8.1 | rcIpConfV2Entry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.8.1.5 | rcIpConfV2AcceptDefRte | RAPID-CITY |