All MIBs › RAPID-CITY › rcIpConfGlobalEcmpMaxPath
rcIpConfGlobalEcmpMaxPath
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcIpConfGlobalEcmpMaxPath
OID (numeric): 1.3.6.1.4.1.2272.1.8.1.6.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Used to globally configure maximum ECMP paths number.
What is rcIpConfGlobalEcmpMaxPath?
This object controls the global configuration setting for the maximum number of ECMP (Equal-Cost Multi-Path) paths that the router can use for load balancing across equal-cost routes. Setting this value to true enables ECMP functionality on the device, allowing traffic to be distributed across multiple equal-cost paths to improve bandwidth utilization. A network operator would configure this to enable or disable multi-path routing to optimize traffic distribution across the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.6.4 snmpwalk -v2c -c public <target> RAPID-CITY::rcIpConfGlobalEcmpMaxPath
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.6.4.1 snmpget -v2c -c public <target> RAPID-CITY::rcIpConfGlobalEcmpMaxPath.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.1.6.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8 | rcIp | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1 | rcIpConf | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.6 | rcIpConfGlobal | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.8.1.6.4 | rcIpConfGlobalEcmpMaxPath | RAPID-CITY |