RAPID-CITY :: rcIpConfAutoAggrerateEnable

MIB Reference — IPNetwork Monitor

All MIBsRAPID-CITYrcIpConfAutoAggrerateEnable

rcIpConfAutoAggrerateEnable

Module: RAPID-CITY

OID (symbolic): RAPID-CITY::rcIpConfAutoAggrerateEnable

OID (numeric): 1.3.6.1.4.1.2272.1.8.1.1.1.11

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description:

Used to indicate whether the auto aggregation feature should be enabled on this interface.

What is rcIpConfAutoAggrerateEnable?

This read-write boolean controls whether automatic route aggregation is active on a given network interface in a Bay Networks switch. When enabled, the system automatically combines multiple subnets into a single aggregate route to reduce routing table size. An operator toggles this setting to optimize routing efficiency while balancing the need for route granularity on that interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.1.1.11
snmpwalk -v2c -c public <target> RAPID-CITY::rcIpConfAutoAggrerateEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.8.1.1.1.11.1
snmpget -v2c -c public <target> RAPID-CITY::rcIpConfAutoAggrerateEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.8.1.1.1.11.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rcIpConfAutoAggrerateEnable.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.1rcMgmtRAPID-CITY
1.3.6.1.4.1.2272.1.8rcIpRAPID-CITY
1.3.6.1.4.1.2272.1.8.1rcIpConfRAPID-CITY
1.3.6.1.4.1.2272.1.8.1.1rcIpConfTableRAPID-CITY
1.3.6.1.4.1.2272.1.8.1.1.1rcIpConfEntryRAPID-CITY
1.3.6.1.4.1.2272.1.8.1.1.1.11rcIpConfAutoAggrerateEnableRAPID-CITY