All MIBs › RAPID-CITY › rcDiagMirrorByPortMirroringPort
rcDiagMirrorByPortMirroringPort
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcDiagMirrorByPortMirroringPort
OID (numeric): 1.3.6.1.4.1.2272.1.23.1.1.3
Node type: OBJECT-TYPE
Type: InterfaceIndex
Access: read-write
Description:
Used to configure the 'mirroring' port. The port where packets are copied to.
What is rcDiagMirrorByPortMirroringPort?
This object designates which physical port acts as the destination for port mirroring, receiving copies of packets from one or more source ports for traffic analysis. It is the port where an external analyzer or packet capture device connects. An operator sets this to configure where diagnostic traffic should be replicated for troubleshooting purposes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.23.1.1.3 snmpwalk -v2c -c public <target> RAPID-CITY::rcDiagMirrorByPortMirroringPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.23.1.1.3.1 snmpget -v2c -c public <target> RAPID-CITY::rcDiagMirrorByPortMirroringPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.23.1.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.23 | rcDiag | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.23.1 | rcDiagMirrorByPortTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.23.1.1 | rcDiagMirrorByPortEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.23.1.1.3 | rcDiagMirrorByPortMirroringPort | RAPID-CITY |